@@ -536,6 +536,11 @@ u32 dispc_mgr_get_framedone_irq(enum omap_channel channel)
return mgr_desc[channel].framedone_irq;
}
+u32 dispc_wb_get_framedone_irq(void)
+{
+ return DISPC_IRQ_FRAMEDONEWB;
+}
+
bool dispc_mgr_go_busy(enum omap_channel channel)
{
return mgr_fld_read(channel, DISPC_MGR_FLD_GO) == 1;
@@ -563,6 +568,30 @@ void dispc_mgr_go(enum omap_channel channel)
mgr_fld_write(channel, DISPC_MGR_FLD_GO, 1);
}
+bool dispc_wb_go_busy(void)
+{
+ return REG_GET(DISPC_CONTROL2, 6, 6) == 1;
+}
+
+void dispc_wb_go(void)
+{
+ enum omap_plane plane = OMAP_DSS_WB;
+ bool enable, go;
+
+ enable = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0) == 1;
+
+ if (!enable)
+ return;
+
+ go = REG_GET(DISPC_CONTROL2, 6, 6) == 1;
+ if (go) {
+ DSSERR("GO bit not down for WB\n");
+ return;
+ }
+
+ REG_FLD_MOD(DISPC_CONTROL2, 1, 6, 6);
+}
+
static void dispc_ovl_write_firh_reg(enum omap_plane plane, int reg, u32 value)
{
dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value);
@@ -2690,6 +2719,47 @@ void dispc_mgr_enable(enum omap_channel channel, bool enable)
BUG();
}
+void dispc_wb_enable(bool enable)
+{
+ enum omap_plane plane = OMAP_DSS_WB;
+ struct completion frame_done_completion;
+ bool is_on;
+ int r;
+ u32 irq;
+
+ is_on = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
+ irq = DISPC_IRQ_FRAMEDONEWB;
+
+ if (!enable && is_on) {
+ init_completion(&frame_done_completion);
+
+ r = omap_dispc_register_isr(dispc_disable_isr,
+ &frame_done_completion, irq);
+ if (r)
+ DSSERR("failed to register FRAMEDONEWB isr\n");
+ }
+
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 0, 0);
+
+ if (!enable && is_on) {
+ if (!wait_for_completion_timeout(&frame_done_completion,
+ msecs_to_jiffies(100)))
+ DSSERR("timeout waiting for FRAMEDONEWB\n");
+
+ r = omap_dispc_unregister_isr(dispc_disable_isr,
+ &frame_done_completion, irq);
+ if (r)
+ DSSERR("failed to unregister FRAMEDONEWB isr\n");
+ }
+}
+
+bool dispc_wb_is_enabled(void)
+{
+ enum omap_plane plane = OMAP_DSS_WB;
+
+ return REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
+}
+
void dispc_lcd_enable_signal_polarity(bool act_high)
{
if (!dss_has_feature(FEAT_LCDENABLEPOL))
@@ -482,6 +482,11 @@ int dispc_mgr_get_clock_div(enum omap_channel channel,
void dispc_mgr_setup(enum omap_channel channel,
struct omap_overlay_manager_info *info);
+u32 dispc_wb_get_framedone_irq(void);
+bool dispc_wb_go_busy(void);
+void dispc_wb_go(void);
+void dispc_wb_enable(bool enable);
+bool dispc_wb_is_enabled(void);
void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
bool mem_to_mem, const struct omap_video_timings *timings);
Add functions to enable writeback, and set/check state of GO bit. These bits are identical in behaviour with the corresponding overlay manager bits. Configure them in a similar way to mgr_enable() and mgr_go_* functions. Add a helper to get the FRAMEDONE irq corresponding to writeback. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/video/omap2/dss/dispc.c | 70 +++++++++++++++++++++++++++++++++++++++ drivers/video/omap2/dss/dss.h | 5 +++ 2 files changed, 75 insertions(+)