@@ -236,6 +236,11 @@ static const struct {
},
};
+struct color_conv_coef {
+ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
+ int full_range;
+};
+
static void _omap_dispc_set_irqs(void);
static unsigned long dispc_plane_pclk_rate(enum omap_plane plane);
static unsigned long dispc_plane_lclk_rate(enum omap_plane plane);
@@ -674,41 +679,41 @@ static void dispc_ovl_set_scale_coef(enum omap_plane plane, int fir_hinc,
}
}
-static void _dispc_setup_color_conv_coef(void)
-{
- int i;
- const struct color_conv_coef {
- int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
- int full_range;
- } ctbl_bt601_5 = {
- 298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
- };
-
- const struct color_conv_coef *ct;
+static void dispc_ovl_write_color_conv_coef(enum omap_plane plane,
+ const struct color_conv_coef *ct)
+{
#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
- ct = &ctbl_bt601_5;
+ dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->rcr, ct->ry));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->gy, ct->rcb));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->gcb, ct->gcr));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->bcr, ct->by));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->bcb));
- for (i = 1; i < dss_feat_get_num_ovls(); i++) {
- dispc_write_reg(DISPC_OVL_CONV_COEF(i, 0),
- CVAL(ct->rcr, ct->ry));
- dispc_write_reg(DISPC_OVL_CONV_COEF(i, 1),
- CVAL(ct->gy, ct->rcb));
- dispc_write_reg(DISPC_OVL_CONV_COEF(i, 2),
- CVAL(ct->gcb, ct->gcr));
- dispc_write_reg(DISPC_OVL_CONV_COEF(i, 3),
- CVAL(ct->bcr, ct->by));
- dispc_write_reg(DISPC_OVL_CONV_COEF(i, 4),
- CVAL(0, ct->bcb));
-
- REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(i), ct->full_range,
- 11, 11);
- }
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), ct->full_range, 11, 11);
#undef CVAL
}
+static void dispc_setup_color_conv_coef(void)
+{
+ int i;
+ int num_ovl = dss_feat_get_num_ovls();
+ int num_wb = dss_feat_get_num_wbs();
+ const struct color_conv_coef ctbl_bt601_5_ovl = {
+ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
+ };
+ const struct color_conv_coef ctbl_bt601_5_wb = {
+ 66, 112, -38, 129, -94, -74, 25, -18, 112, 0,
+ };
+
+ for (i = 1; i < num_ovl; i++)
+ dispc_ovl_write_color_conv_coef(i, &ctbl_bt601_5_ovl);
+
+ for (; i < num_wb; i++)
+ dispc_ovl_write_color_conv_coef(i, &ctbl_bt601_5_wb);
+}
static void dispc_ovl_set_ba0(enum omap_plane plane, u32 paddr)
{
@@ -3973,7 +3978,7 @@ static void _omap_dispc_initial_config(void)
if (dss_has_feature(FEAT_FUNCGATED))
REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
- _dispc_setup_color_conv_coef();
+ dispc_setup_color_conv_coef();
dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
Writeback pipeline receives RGB data from one of the overlays or one of the overlay managers. If the target color mode is YUV422 or NV12, we need to convert the RGB pixels to YUV. The scaler in WB then converts it to the target color mode. Hence, the color conversion coefficients that need to be programmed are the ones which convert a RGB24 pixel to YUV444. Program these coefficients for writeback pipeline. Rearrange the code a bit to configure different coefficients for overlays and writeback. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/video/omap2/dss/dispc.c | 61 +++++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 28 deletions(-)