| Message ID | 1349421986-12467-1-git-send-email-sourav.poddar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Dmitry, On Friday 05 October 2012 12:56 PM, Sourav Poddar wrote: > From: G, Manjunath Kondaiah <manjugk@ti.com> > > SMSC ECE1099 is a keyboard scan or GPIO expansion device.The device > supports a keypad scan matrix of 23*8.This driver uses this > device as a keypad driver. > > Tested on omap5430 evm with 3.6-rc6 custom kernel. > > Cc: Benoit Cousson <b-cousson@ti.com> > Cc: Felipe Balbi <balbi@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > Acked-by: Felipe Balbi <balbi@ti.com> > --- > This patch was posted as a series initially > http://www.spinics.net/lists/linux-omap/msg78772.html > > But the parent mfd driver has beeen already picked by mfd maintainer. > So this patch can now posted as an standalone patch. > > v3->v4: > Fix Dmitry's comments: > - Error patch(input_free_device/input_unregister_device). > - Few cleanups. > - Included INPUT_MATRIXKMAP > drivers/input/keyboard/Kconfig | 12 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/smsc-ece1099-keypad.c | 303 ++++++++++++++++++++++++++ > 3 files changed, 316 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/keyboard/smsc-ece1099-keypad.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index c50fa75..e370b03 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -593,6 +593,18 @@ config KEYBOARD_TWL4030 > To compile this driver as a module, choose M here: the > module will be called twl4030_keypad. > > +config KEYBOARD_SMSC > + tristate "SMSC ECE1099 keypad support" > + depends on I2C > + select INPUT_MATRIXKMAP > + help > + Say Y here if your board use the smsc keypad controller > + for omap5 defconfig. It's safe to say enable this > + even on boards that don't use the keypad controller. > + > + To compile this driver as a module, choose M here: the > + module will be called smsc-ece1099-keypad. > + > config KEYBOARD_XTKBD > tristate "XT keyboard" > select SERIO > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 44e7600..0f2aa26 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o > obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o > +obj-$(CONFIG_KEYBOARD_SMSC) += smsc-ece1099-keypad.o > obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o > obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o > diff --git a/drivers/input/keyboard/smsc-ece1099-keypad.c b/drivers/input/keyboard/smsc-ece1099-keypad.c > new file mode 100644 > index 0000000..a4a0dfe > --- /dev/null > +++ b/drivers/input/keyboard/smsc-ece1099-keypad.c > @@ -0,0 +1,303 @@ > +/* > + * SMSC_ECE1099 Keypad driver > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/input.h> > +#include <linux/gpio.h> > +#include <linux/slab.h> > +#include <linux/jiffies.h> > +#include <linux/input/matrix_keypad.h> > +#include <linux/delay.h> > +#include <linux/mfd/core.h> > +#include <linux/mfd/smsc.h> > +#include <linux/of_gpio.h> > +#include <linux/of.h> > + > +#define KEYPRESS_TIME 200 > + > +struct smsc_keypad { > + struct smsc *smsc; > + struct matrix_keymap_data *keymap_data; > + unsigned int last_key_state[16]; > + unsigned int last_col; > + unsigned int last_key_ms[16]; > + unsigned short *keymap; > + struct i2c_client *client; > + struct input_dev *input; > + int rows, cols; > + int row_shift; > + bool no_autorepeat; > + unsigned irq; > + struct device *dev; > +}; > + > +static void smsc_kp_scan(struct smsc_keypad *kp) > +{ > + struct input_dev *input = kp->input; > + int i, j; > + int row, col; > + int temp, code; > + unsigned int new_state[16]; > + unsigned int bits_changed; > + int this_ms; > + > + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0x00); > + smsc_write(kp->dev, SMSC_KP_INT_STAT, 0xFF); > + > + /* Scan for row and column */ > + for (i = 0; i < kp->cols; i++) { > + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_EVAL + i); > + /* Read Row Status */ > + smsc_read(kp->dev, SMSC_KP_IN, &temp); > + if (temp == 0xFF) > + continue; > + > + col = i; > + for (j = 0; j < kp->rows; j++) { > + if ((temp & 0x01) != 0x00) { > + temp = temp >> 1; > + continue; > + } > + > + row = j; > + new_state[col] = (1 << row); > + bits_changed = kp->last_key_state[col] ^ new_state[col]; > + this_ms = jiffies_to_msecs(jiffies); > + if (bits_changed != 0 || (!bits_changed && > + ((this_ms - kp->last_key_ms[col]) >= KEYPRESS_TIME))) { > + code = MATRIX_SCAN_CODE(row, col, kp->row_shift); > + input_event(input, EV_MSC, MSC_SCAN, code); > + input_report_key(input, kp->keymap[code], 1); > + input_report_key(input, kp->keymap[code], 0); > + kp->last_key_state[col] = new_state[col]; > + if (kp->last_col != col) > + kp->last_key_state[kp->last_col] = 0; > + kp->last_key_ms[col] = this_ms; > + } > + temp = temp >> 1; > + } > + } > + input_sync(input); > + > + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0xFF); > + > + /* Set up Low Power Mode (Wake-up) (0xFB) */ > + smsc_write(kp->dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); > + > + /*Enable Keypad Scan (generate interrupt on key press) (0x40)*/ > + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); > +} > + > +static irqreturn_t do_kp_irq(int irq, void *_kp) > +{ > + struct smsc_keypad *kp = _kp; > + int int_status; > + > + smsc_read(kp->dev, SMSC_KP_INT_STAT, &int_status); > + if (int_status) > + smsc_kp_scan(kp); > + > + return IRQ_HANDLED; > +} > + > +#ifdef CONFIG_OF > +static int __devinit smsc_keypad_parse_dt(struct device *dev, > + struct smsc_keypad *kp) > +{ > + struct device_node *np = dev->of_node; > + > + if (!np) { > + dev_err(dev, "missing DT data"); > + return -EINVAL; > + } > + > + of_property_read_u32(np, "keypad,num-rows", &kp->rows); > + of_property_read_u32(np, "keypad,num-columns", &kp->cols); > + if (!kp->rows || !kp->cols) { > + dev_err(dev, "number of keypad rows/columns not specified\n"); > + return -EINVAL; > + } > + > + if (of_property_read_bool(np, "linux,input-no-autorepeat")) > + kp->no_autorepeat = true; > + > + return 0; > +} > +#else > +static inline int smsc_keypad_parse_dt(struct device *dev, > + struct smsc_keypad *kp) > +{ > + return -ENOSYS; > +} > +#endif > + > +static int __devinit > +smsc_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct smsc *smsc = dev_get_drvdata(pdev->dev.parent); > + struct input_dev *input; > + struct smsc_keypad *kp; > + int ret = 0; > + int i, max_keys, row_shift; > + int irq; > + int addr; > + > + kp = devm_kzalloc(dev, sizeof(*kp), GFP_KERNEL); > + > + input = input_allocate_device(); > + if (!kp || !input) { > + ret = -ENOMEM; > + goto err1; > + } > + > + ret = smsc_keypad_parse_dt(&pdev->dev, kp); > + if (ret) > + goto err1; > + > + /* Get the debug Device */ > + kp->input = input; > + kp->smsc = smsc; > + kp->irq = platform_get_irq(pdev, 0); > + kp->dev = dev; > + > + /* setup input device */ > + __set_bit(EV_KEY, input->evbit); > + > + /* Enable auto repeat feature of Linux input subsystem */ > + if (!kp->no_autorepeat) > + __set_bit(EV_REP, input->evbit); > + > + input_set_capability(input, EV_MSC, MSC_SCAN); > + input->name = "SMSC Keypad"; > + input->phys = "smsc_keypad/input0"; > + input->dev.parent = &pdev->dev; > + input->id.bustype = BUS_HOST; > + input->id.vendor = 0x0001; > + input->id.product = 0x0001; > + input->id.version = 0x0003; > + > + /* Mask all GPIO interrupts (0x37-0x3B) */ > + for (addr = SMSC_GPIO_INT_MASK_START; > + addr < SMSC_GPIO_INT_MASK_START + 4; addr++) > + smsc_write(dev, addr, 0); > + > + /* Set all outputs high (0x05-0x09) */ > + for (addr = SMSC_GPIO_DATA_OUT_START; > + addr < SMSC_GPIO_DATA_OUT_START + 4; addr++) > + smsc_write(dev, addr, 0xff); > + > + /* Clear all GPIO interrupts (0x32-0x36) */ > + for (addr = SMSC_GPIO_INT_STAT_START; > + addr < SMSC_GPIO_INT_STAT_START + 4; addr++) > + smsc_write(dev, addr, 0xff); > + > + /* Configure the smsc pins as Keyboard scan Input */ > + for (i = 0; i <= kp->rows; i++) { > + addr = 0x12 + i; > + smsc_write(dev, addr, SMSC_KP_KSI); > + } > + > + /* Configure the smsc pins as Keyboard scan output */ > + for (i = 0; i <= kp->cols; i++) { > + addr = 0x1A + i; > + smsc_write(dev, addr, SMSC_KP_KSO); > + } > + > + smsc_write(dev, SMSC_KP_INT_STAT, SMSC_KP_SET_HIGH); > + smsc_write(dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); > + smsc_write(dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); > + > + row_shift = get_count_order(kp->cols); > + max_keys = kp->rows << row_shift; > + > + kp->row_shift = row_shift; > + kp->keymap = devm_kzalloc(dev, max_keys * sizeof(kp->keymap[0]), > + GFP_KERNEL); > + if (!kp->keymap) { > + dev_err(&pdev->dev, "Not enough memory for keymap\n"); > + ret = -ENOMEM; > + } > + > + ret = matrix_keypad_build_keymap(NULL, NULL, kp->rows, > + kp->cols, kp->keymap, input); > + if (ret) { > + dev_err(&pdev->dev, "failed to build keymap\n"); > + goto err1; > + } > + > + /* > + * This ISR will always execute in kernel thread context because of > + * the need to access the SMSC over the I2C bus. > + */ > + ret = devm_request_threaded_irq(dev, kp->irq, NULL, do_kp_irq, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, pdev->name, kp); > + if (ret) { > + dev_dbg(&pdev->dev, "request_irq failed for irq no=%d\n", > + irq); > + goto err1; > + } > + > + /* Enable smsc keypad interrupts */ > + ret = smsc_write(dev, SMSC_KP_INT_MASK, 0xff); > + if (ret < 0) > + goto err2; > + > + ret = input_register_device(input); > + if (ret) { > + dev_err(kp->dev, > + "Unable to register twl4030 keypad device\n"); > + goto err2; > + } > + > + return 0; > + > +err2: > + free_irq(kp->irq, kp); > +err1: > + input_free_device(input); > + return ret; > +} > + > +static int __devexit smsc_remove(struct platform_device *pdev) > +{ > + struct smsc_keypad *kp = platform_get_drvdata(pdev); > + input_unregister_device(kp->input); > + > + return 0; > +} > + > +#ifdef CONFIG_OF > +static const struct of_device_id smsc_keypad_dt_match[] = { > + { .compatible = "smsc,keypad" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, smsc_keypad_dt_match); > +#endif > + > +static struct platform_driver smsc_driver = { > + .driver = { > + .name = "smsc-keypad", > + .of_match_table = of_match_ptr(smsc_keypad_dt_match), > + .owner = THIS_MODULE, > + }, > + .probe = smsc_probe, > + .remove = __devexit_p(smsc_remove), > +}; > + > +module_platform_driver(smsc_driver); > + > +MODULE_AUTHOR("G Kondaiah Manjunath <manjugk@ti.com>"); > +MODULE_DESCRIPTION("SMSC ECE1099 Keypad driver"); > +MODULE_LICENSE("GPL v2"); ping on this? ~Sourav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sourav, On Fri, Oct 05, 2012 at 12:56:26PM +0530, Sourav Poddar wrote: > From: G, Manjunath Kondaiah <manjugk@ti.com> > > SMSC ECE1099 is a keyboard scan or GPIO expansion device.The device > supports a keypad scan matrix of 23*8.This driver uses this > device as a keypad driver. > > Tested on omap5430 evm with 3.6-rc6 custom kernel. > > Cc: Benoit Cousson <b-cousson@ti.com> > Cc: Felipe Balbi <balbi@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > Acked-by: Felipe Balbi <balbi@ti.com> > --- > This patch was posted as a series initially > http://www.spinics.net/lists/linux-omap/msg78772.html > > But the parent mfd driver has beeen already picked by mfd maintainer. > So this patch can now posted as an standalone patch. > > v3->v4: > Fix Dmitry's comments: > - Error patch(input_free_device/input_unregister_device). > - Few cleanups. > - Included INPUT_MATRIXKMAP > drivers/input/keyboard/Kconfig | 12 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/smsc-ece1099-keypad.c | 303 ++++++++++++++++++++++++++ > 3 files changed, 316 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/keyboard/smsc-ece1099-keypad.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index c50fa75..e370b03 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -593,6 +593,18 @@ config KEYBOARD_TWL4030 > To compile this driver as a module, choose M here: the > module will be called twl4030_keypad. > > +config KEYBOARD_SMSC > + tristate "SMSC ECE1099 keypad support" > + depends on I2C > + select INPUT_MATRIXKMAP While I do not see hard dependencies in the driver itself, should we also depend on MFD_SMSC? > + help > + Say Y here if your board use the smsc keypad controller > + for omap5 defconfig. It's safe to say enable this > + even on boards that don't use the keypad controller. > + > + To compile this driver as a module, choose M here: the > + module will be called smsc-ece1099-keypad. > + > config KEYBOARD_XTKBD > tristate "XT keyboard" > select SERIO > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 44e7600..0f2aa26 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o > obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o > +obj-$(CONFIG_KEYBOARD_SMSC) += smsc-ece1099-keypad.o > obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o > obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o > diff --git a/drivers/input/keyboard/smsc-ece1099-keypad.c b/drivers/input/keyboard/smsc-ece1099-keypad.c > new file mode 100644 > index 0000000..a4a0dfe > --- /dev/null > +++ b/drivers/input/keyboard/smsc-ece1099-keypad.c > @@ -0,0 +1,303 @@ > +/* > + * SMSC_ECE1099 Keypad driver > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/input.h> > +#include <linux/gpio.h> > +#include <linux/slab.h> > +#include <linux/jiffies.h> > +#include <linux/input/matrix_keypad.h> > +#include <linux/delay.h> > +#include <linux/mfd/core.h> > +#include <linux/mfd/smsc.h> > +#include <linux/of_gpio.h> > +#include <linux/of.h> > + > +#define KEYPRESS_TIME 200 > + > +struct smsc_keypad { > + struct smsc *smsc; I do not see this being actually used. > + struct matrix_keymap_data *keymap_data; Does not seem to be used. > + unsigned int last_key_state[16]; > + unsigned int last_col; > + unsigned int last_key_ms[16]; > + unsigned short *keymap; > + struct i2c_client *client; > + struct input_dev *input; > + int rows, cols; > + int row_shift; > + bool no_autorepeat; > + unsigned irq; I do not think you need to store irq if you are using managed resources. > + struct device *dev; > +}; > + > +static void smsc_kp_scan(struct smsc_keypad *kp) > +{ > + struct input_dev *input = kp->input; > + int i, j; > + int row, col; > + int temp, code; > + unsigned int new_state[16]; > + unsigned int bits_changed; > + int this_ms; > + > + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0x00); > + smsc_write(kp->dev, SMSC_KP_INT_STAT, 0xFF); > + > + /* Scan for row and column */ > + for (i = 0; i < kp->cols; i++) { > + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_EVAL + i); > + /* Read Row Status */ > + smsc_read(kp->dev, SMSC_KP_IN, &temp); > + if (temp == 0xFF) > + continue; > + > + col = i; > + for (j = 0; j < kp->rows; j++) { > + if ((temp & 0x01) != 0x00) { > + temp = temp >> 1; > + continue; > + } > + > + row = j; > + new_state[col] = (1 << row); > + bits_changed = kp->last_key_state[col] ^ new_state[col]; > + this_ms = jiffies_to_msecs(jiffies); > + if (bits_changed != 0 || (!bits_changed && > + ((this_ms - kp->last_key_ms[col]) >= KEYPRESS_TIME))) { > + code = MATRIX_SCAN_CODE(row, col, kp->row_shift); > + input_event(input, EV_MSC, MSC_SCAN, code); > + input_report_key(input, kp->keymap[code], 1); > + input_report_key(input, kp->keymap[code], 0); > + kp->last_key_state[col] = new_state[col]; > + if (kp->last_col != col) > + kp->last_key_state[kp->last_col] = 0; > + kp->last_key_ms[col] = this_ms; > + } > + temp = temp >> 1; > + } Maybe split inner loop into separate function? > + } > + input_sync(input); > + > + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0xFF); > + > + /* Set up Low Power Mode (Wake-up) (0xFB) */ > + smsc_write(kp->dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); > + > + /*Enable Keypad Scan (generate interrupt on key press) (0x40)*/ > + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); > +} > + > +static irqreturn_t do_kp_irq(int irq, void *_kp) > +{ > + struct smsc_keypad *kp = _kp; > + int int_status; > + > + smsc_read(kp->dev, SMSC_KP_INT_STAT, &int_status); > + if (int_status) > + smsc_kp_scan(kp); > + > + return IRQ_HANDLED; > +} > + > +#ifdef CONFIG_OF > +static int __devinit smsc_keypad_parse_dt(struct device *dev, > + struct smsc_keypad *kp) > +{ > + struct device_node *np = dev->of_node; > + > + if (!np) { > + dev_err(dev, "missing DT data"); > + return -EINVAL; > + } > + > + of_property_read_u32(np, "keypad,num-rows", &kp->rows); > + of_property_read_u32(np, "keypad,num-columns", &kp->cols); > + if (!kp->rows || !kp->cols) { > + dev_err(dev, "number of keypad rows/columns not specified\n"); > + return -EINVAL; > + } > + > + if (of_property_read_bool(np, "linux,input-no-autorepeat")) > + kp->no_autorepeat = true; > + > + return 0; > +} > +#else > +static inline int smsc_keypad_parse_dt(struct device *dev, > + struct smsc_keypad *kp) > +{ > + return -ENOSYS; > +} > +#endif > + > +static int __devinit > +smsc_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct smsc *smsc = dev_get_drvdata(pdev->dev.parent); > + struct input_dev *input; > + struct smsc_keypad *kp; > + int ret = 0; > + int i, max_keys, row_shift; > + int irq; > + int addr; > + > + kp = devm_kzalloc(dev, sizeof(*kp), GFP_KERNEL); > + > + input = input_allocate_device(); > + if (!kp || !input) { > + ret = -ENOMEM; > + goto err1; > + } > + > + ret = smsc_keypad_parse_dt(&pdev->dev, kp); > + if (ret) > + goto err1; So this is pure-DT driver. Please add Kconfig dependency on OF, drop #ifdef guards and the stub. > + > + /* Get the debug Device */ > + kp->input = input; > + kp->smsc = smsc; > + kp->irq = platform_get_irq(pdev, 0); > + kp->dev = dev; > + > + /* setup input device */ > + __set_bit(EV_KEY, input->evbit); > + > + /* Enable auto repeat feature of Linux input subsystem */ > + if (!kp->no_autorepeat) > + __set_bit(EV_REP, input->evbit); > + > + input_set_capability(input, EV_MSC, MSC_SCAN); > + input->name = "SMSC Keypad"; > + input->phys = "smsc_keypad/input0"; > + input->dev.parent = &pdev->dev; > + input->id.bustype = BUS_HOST; > + input->id.vendor = 0x0001; > + input->id.product = 0x0001; > + input->id.version = 0x0003; > + > + /* Mask all GPIO interrupts (0x37-0x3B) */ > + for (addr = SMSC_GPIO_INT_MASK_START; > + addr < SMSC_GPIO_INT_MASK_START + 4; addr++) > + smsc_write(dev, addr, 0); > + > + /* Set all outputs high (0x05-0x09) */ > + for (addr = SMSC_GPIO_DATA_OUT_START; > + addr < SMSC_GPIO_DATA_OUT_START + 4; addr++) > + smsc_write(dev, addr, 0xff); > + > + /* Clear all GPIO interrupts (0x32-0x36) */ > + for (addr = SMSC_GPIO_INT_STAT_START; > + addr < SMSC_GPIO_INT_STAT_START + 4; addr++) > + smsc_write(dev, addr, 0xff); You use lowercase hex digits here but also uppercase in other parts of the driver. Can we use lowercase throughout please? > + > + /* Configure the smsc pins as Keyboard scan Input */ > + for (i = 0; i <= kp->rows; i++) { You sure you don't want < instead of <= ? > + addr = 0x12 + i; > + smsc_write(dev, addr, SMSC_KP_KSI); > + } > + > + /* Configure the smsc pins as Keyboard scan output */ > + for (i = 0; i <= kp->cols; i++) { > + addr = 0x1A + i; > + smsc_write(dev, addr, SMSC_KP_KSO); > + } > + > + smsc_write(dev, SMSC_KP_INT_STAT, SMSC_KP_SET_HIGH); > + smsc_write(dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); > + smsc_write(dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); > + > + row_shift = get_count_order(kp->cols); > + max_keys = kp->rows << row_shift; > + > + kp->row_shift = row_shift; > + kp->keymap = devm_kzalloc(dev, max_keys * sizeof(kp->keymap[0]), > + GFP_KERNEL); > + if (!kp->keymap) { > + dev_err(&pdev->dev, "Not enough memory for keymap\n"); > + ret = -ENOMEM; > + } > + > + ret = matrix_keypad_build_keymap(NULL, NULL, kp->rows, > + kp->cols, kp->keymap, input); > + if (ret) { > + dev_err(&pdev->dev, "failed to build keymap\n"); > + goto err1; > + } > + > + /* > + * This ISR will always execute in kernel thread context because of > + * the need to access the SMSC over the I2C bus. > + */ > + ret = devm_request_threaded_irq(dev, kp->irq, NULL, do_kp_irq, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, pdev->name, kp); > + if (ret) { > + dev_dbg(&pdev->dev, "request_irq failed for irq no=%d\n", > + irq); > + goto err1; > + } > + > + /* Enable smsc keypad interrupts */ > + ret = smsc_write(dev, SMSC_KP_INT_MASK, 0xff); > + if (ret < 0) > + goto err2; Consider implementing ->open() and ->close() and putting the above there. > + > + ret = input_register_device(input); > + if (ret) { > + dev_err(kp->dev, > + "Unable to register twl4030 keypad device\n"); > + goto err2; > + } > + > + return 0; > + > +err2: > + free_irq(kp->irq, kp); If you allocate IRQ with devm_request_threaded_irq then you should free it with devm_free_irq(). > +err1: > + input_free_device(input); > + return ret; > +} > + > +static int __devexit smsc_remove(struct platform_device *pdev) > +{ > + struct smsc_keypad *kp = platform_get_drvdata(pdev); > + input_unregister_device(kp->input); This is wrong: input device is gone but IRQs are still active. You need to disable or free IRQ first. However I just posted a patch adding support for managed input devices: http://www.spinics.net/lists/linux-input/msg23077.html so please either switch over, or go with unmanaged resources throughout. > + > + return 0; > +} > + > +#ifdef CONFIG_OF Since we require DT this ifdef is not needed. > +static const struct of_device_id smsc_keypad_dt_match[] = { > + { .compatible = "smsc,keypad" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, smsc_keypad_dt_match); > +#endif > + > +static struct platform_driver smsc_driver = { > + .driver = { > + .name = "smsc-keypad", > + .of_match_table = of_match_ptr(smsc_keypad_dt_match), > + .owner = THIS_MODULE, > + }, > + .probe = smsc_probe, > + .remove = __devexit_p(smsc_remove), > +}; > + > +module_platform_driver(smsc_driver); > + > +MODULE_AUTHOR("G Kondaiah Manjunath <manjugk@ti.com>"); > +MODULE_DESCRIPTION("SMSC ECE1099 Keypad driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.1 > Thanks.
Hi Dmitry, On Wednesday 24 October 2012 12:05 PM, Dmitry Torokhov wrote: > Hi Sourav, > > On Fri, Oct 05, 2012 at 12:56:26PM +0530, Sourav Poddar wrote: >> From: G, Manjunath Kondaiah <manjugk@ti.com> >> >> SMSC ECE1099 is a keyboard scan or GPIO expansion device.The device >> supports a keypad scan matrix of 23*8.This driver uses this >> device as a keypad driver. >> >> Tested on omap5430 evm with 3.6-rc6 custom kernel. >> >> Cc: Benoit Cousson <b-cousson@ti.com> >> Cc: Felipe Balbi <balbi@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> Acked-by: Felipe Balbi <balbi@ti.com> >> --- >> This patch was posted as a series initially >> http://www.spinics.net/lists/linux-omap/msg78772.html >> >> But the parent mfd driver has beeen already picked by mfd maintainer. >> So this patch can now posted as an standalone patch. >> >> v3->v4: >> Fix Dmitry's comments: >> - Error patch(input_free_device/input_unregister_device). >> - Few cleanups. >> - Included INPUT_MATRIXKMAP >> drivers/input/keyboard/Kconfig | 12 + >> drivers/input/keyboard/Makefile | 1 + >> drivers/input/keyboard/smsc-ece1099-keypad.c | 303 ++++++++++++++++++++++++++ >> 3 files changed, 316 insertions(+), 0 deletions(-) >> create mode 100644 drivers/input/keyboard/smsc-ece1099-keypad.c >> >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index c50fa75..e370b03 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -593,6 +593,18 @@ config KEYBOARD_TWL4030 >> To compile this driver as a module, choose M here: the >> module will be called twl4030_keypad. >> >> +config KEYBOARD_SMSC >> + tristate "SMSC ECE1099 keypad support" >> + depends on I2C >> + select INPUT_MATRIXKMAP > While I do not see hard dependencies in the driver itself, should we > also depend on MFD_SMSC? Ahh, may be yes. This driver will get probed only after parent driver get probed. So may be we can follow the same order for building also. >> + help >> + Say Y here if your board use the smsc keypad controller >> + for omap5 defconfig. It's safe to say enable this >> + even on boards that don't use the keypad controller. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called smsc-ece1099-keypad. >> + >> config KEYBOARD_XTKBD >> tristate "XT keyboard" >> select SERIO >> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile >> index 44e7600..0f2aa26 100644 >> --- a/drivers/input/keyboard/Makefile >> +++ b/drivers/input/keyboard/Makefile >> @@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o >> obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o >> obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o >> obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o >> +obj-$(CONFIG_KEYBOARD_SMSC) += smsc-ece1099-keypad.o >> obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o >> obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o >> diff --git a/drivers/input/keyboard/smsc-ece1099-keypad.c b/drivers/input/keyboard/smsc-ece1099-keypad.c >> new file mode 100644 >> index 0000000..a4a0dfe >> --- /dev/null >> +++ b/drivers/input/keyboard/smsc-ece1099-keypad.c >> @@ -0,0 +1,303 @@ >> +/* >> + * SMSC_ECE1099 Keypad driver >> + * >> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <linux/i2c.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/init.h> >> +#include <linux/interrupt.h> >> +#include <linux/input.h> >> +#include <linux/gpio.h> >> +#include <linux/slab.h> >> +#include <linux/jiffies.h> >> +#include <linux/input/matrix_keypad.h> >> +#include <linux/delay.h> >> +#include <linux/mfd/core.h> >> +#include <linux/mfd/smsc.h> >> +#include <linux/of_gpio.h> >> +#include <linux/of.h> >> + >> +#define KEYPRESS_TIME 200 >> + >> +struct smsc_keypad { >> + struct smsc *smsc; > I do not see this being actually used. Yes, will remove. >> + struct matrix_keymap_data *keymap_data; > Does not seem to be used. Yes, will remove. >> + unsigned int last_key_state[16]; >> + unsigned int last_col; >> + unsigned int last_key_ms[16]; >> + unsigned short *keymap; >> + struct i2c_client *client; >> + struct input_dev *input; >> + int rows, cols; >> + int row_shift; >> + bool no_autorepeat; >> + unsigned irq; > I do not think you need to store irq if you are using managed resources. > Don't, we need some variable to keep the irq number received after parsing the dt data.? This variable is basically used as a parameter in "request_irq" api. I saw the patch on omap4_keypad switching to managed resource, and there also we are keeping the keypad_data->irq intact?? >> + struct device *dev; >> +}; >> + >> +static void smsc_kp_scan(struct smsc_keypad *kp) >> +{ >> + struct input_dev *input = kp->input; >> + int i, j; >> + int row, col; >> + int temp, code; >> + unsigned int new_state[16]; >> + unsigned int bits_changed; >> + int this_ms; >> + >> + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0x00); >> + smsc_write(kp->dev, SMSC_KP_INT_STAT, 0xFF); >> + >> + /* Scan for row and column */ >> + for (i = 0; i < kp->cols; i++) { >> + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_EVAL + i); >> + /* Read Row Status */ >> + smsc_read(kp->dev, SMSC_KP_IN, &temp); >> + if (temp == 0xFF) >> + continue; >> + >> + col = i; >> + for (j = 0; j < kp->rows; j++) { >> + if ((temp & 0x01) != 0x00) { >> + temp = temp >> 1; >> + continue; >> + } >> + >> + row = j; >> + new_state[col] = (1 << row); >> + bits_changed = kp->last_key_state[col] ^ new_state[col]; >> + this_ms = jiffies_to_msecs(jiffies); >> + if (bits_changed != 0 || (!bits_changed && >> + ((this_ms - kp->last_key_ms[col]) >= KEYPRESS_TIME))) { >> + code = MATRIX_SCAN_CODE(row, col, kp->row_shift); >> + input_event(input, EV_MSC, MSC_SCAN, code); >> + input_report_key(input, kp->keymap[code], 1); >> + input_report_key(input, kp->keymap[code], 0); >> + kp->last_key_state[col] = new_state[col]; >> + if (kp->last_col != col) >> + kp->last_key_state[kp->last_col] = 0; >> + kp->last_key_ms[col] = this_ms; >> + } >> + temp = temp >> 1; >> + } > > Maybe split inner loop into separate function? Ok. >> + } >> + input_sync(input); >> + >> + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0xFF); >> + >> + /* Set up Low Power Mode (Wake-up) (0xFB) */ >> + smsc_write(kp->dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); >> + >> + /*Enable Keypad Scan (generate interrupt on key press) (0x40)*/ >> + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); >> +} >> + >> +static irqreturn_t do_kp_irq(int irq, void *_kp) >> +{ >> + struct smsc_keypad *kp = _kp; >> + int int_status; >> + >> + smsc_read(kp->dev, SMSC_KP_INT_STAT, &int_status); >> + if (int_status) >> + smsc_kp_scan(kp); >> + >> + return IRQ_HANDLED; >> +} >> + >> +#ifdef CONFIG_OF >> +static int __devinit smsc_keypad_parse_dt(struct device *dev, >> + struct smsc_keypad *kp) >> +{ >> + struct device_node *np = dev->of_node; >> + >> + if (!np) { >> + dev_err(dev, "missing DT data"); >> + return -EINVAL; >> + } >> + >> + of_property_read_u32(np, "keypad,num-rows", &kp->rows); >> + of_property_read_u32(np, "keypad,num-columns", &kp->cols); >> + if (!kp->rows || !kp->cols) { >> + dev_err(dev, "number of keypad rows/columns not specified\n"); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_bool(np, "linux,input-no-autorepeat")) >> + kp->no_autorepeat = true; >> + >> + return 0; >> +} >> +#else >> +static inline int smsc_keypad_parse_dt(struct device *dev, >> + struct smsc_keypad *kp) >> +{ >> + return -ENOSYS; >> +} >> +#endif >> + >> +static int __devinit >> +smsc_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct smsc *smsc = dev_get_drvdata(pdev->dev.parent); >> + struct input_dev *input; >> + struct smsc_keypad *kp; >> + int ret = 0; >> + int i, max_keys, row_shift; >> + int irq; >> + int addr; >> + >> + kp = devm_kzalloc(dev, sizeof(*kp), GFP_KERNEL); >> + >> + input = input_allocate_device(); >> + if (!kp || !input) { >> + ret = -ENOMEM; >> + goto err1; >> + } >> + >> + ret = smsc_keypad_parse_dt(&pdev->dev, kp); >> + if (ret) >> + goto err1; > So this is pure-DT driver. Please add Kconfig dependency on OF, drop > #ifdef guards and the stub. Ok. >> + >> + /* Get the debug Device */ >> + kp->input = input; >> + kp->smsc = smsc; >> + kp->irq = platform_get_irq(pdev, 0); >> + kp->dev = dev; >> + >> + /* setup input device */ >> + __set_bit(EV_KEY, input->evbit); >> + >> + /* Enable auto repeat feature of Linux input subsystem */ >> + if (!kp->no_autorepeat) >> + __set_bit(EV_REP, input->evbit); >> + >> + input_set_capability(input, EV_MSC, MSC_SCAN); >> + input->name = "SMSC Keypad"; >> + input->phys = "smsc_keypad/input0"; >> + input->dev.parent = &pdev->dev; >> + input->id.bustype = BUS_HOST; >> + input->id.vendor = 0x0001; >> + input->id.product = 0x0001; >> + input->id.version = 0x0003; >> + >> + /* Mask all GPIO interrupts (0x37-0x3B) */ >> + for (addr = SMSC_GPIO_INT_MASK_START; >> + addr < SMSC_GPIO_INT_MASK_START + 4; addr++) >> + smsc_write(dev, addr, 0); >> + >> + /* Set all outputs high (0x05-0x09) */ >> + for (addr = SMSC_GPIO_DATA_OUT_START; >> + addr < SMSC_GPIO_DATA_OUT_START + 4; addr++) >> + smsc_write(dev, addr, 0xff); >> + >> + /* Clear all GPIO interrupts (0x32-0x36) */ >> + for (addr = SMSC_GPIO_INT_STAT_START; >> + addr < SMSC_GPIO_INT_STAT_START + 4; addr++) >> + smsc_write(dev, addr, 0xff); > You use lowercase hex digits here but also uppercase in other parts of > the driver. Can we use lowercase throughout please? Will do. >> + >> + /* Configure the smsc pins as Keyboard scan Input */ >> + for (i = 0; i <= kp->rows; i++) { > You sure you don't want < instead of <= ? > Really, "=" should not be there. >> + addr = 0x12 + i; >> + smsc_write(dev, addr, SMSC_KP_KSI); >> + } >> + >> + /* Configure the smsc pins as Keyboard scan output */ >> + for (i = 0; i <= kp->cols; i++) { >> + addr = 0x1A + i; >> + smsc_write(dev, addr, SMSC_KP_KSO); >> + } >> + >> + smsc_write(dev, SMSC_KP_INT_STAT, SMSC_KP_SET_HIGH); >> + smsc_write(dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); >> + smsc_write(dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); >> + >> + row_shift = get_count_order(kp->cols); >> + max_keys = kp->rows << row_shift; >> + >> + kp->row_shift = row_shift; >> + kp->keymap = devm_kzalloc(dev, max_keys * sizeof(kp->keymap[0]), >> + GFP_KERNEL); >> + if (!kp->keymap) { >> + dev_err(&pdev->dev, "Not enough memory for keymap\n"); >> + ret = -ENOMEM; >> + } >> + >> + ret = matrix_keypad_build_keymap(NULL, NULL, kp->rows, >> + kp->cols, kp->keymap, input); >> + if (ret) { >> + dev_err(&pdev->dev, "failed to build keymap\n"); >> + goto err1; >> + } >> + >> + /* >> + * This ISR will always execute in kernel thread context because of >> + * the need to access the SMSC over the I2C bus. >> + */ >> + ret = devm_request_threaded_irq(dev, kp->irq, NULL, do_kp_irq, >> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, pdev->name, kp); >> + if (ret) { >> + dev_dbg(&pdev->dev, "request_irq failed for irq no=%d\n", >> + irq); >> + goto err1; >> + } >> + >> + /* Enable smsc keypad interrupts */ >> + ret = smsc_write(dev, SMSC_KP_INT_MASK, 0xff); >> + if (ret < 0) >> + goto err2; > Consider implementing ->open() and ->close() and putting the above > there. Ok. >> + >> + ret = input_register_device(input); >> + if (ret) { >> + dev_err(kp->dev, >> + "Unable to register twl4030 keypad device\n"); >> + goto err2; >> + } >> + >> + return 0; >> + >> +err2: >> + free_irq(kp->irq, kp); > If you allocate IRQ with devm_request_threaded_irq then you should free > it with devm_free_irq(). Ok. Will change. >> +err1: >> + input_free_device(input); >> + return ret; >> +} >> + >> +static int __devexit smsc_remove(struct platform_device *pdev) >> +{ >> + struct smsc_keypad *kp = platform_get_drvdata(pdev); >> + input_unregister_device(kp->input); > This is wrong: input device is gone but IRQs are still active. You need > to disable or free IRQ first. > > However I just posted a patch adding support for managed input devices: > > http://www.spinics.net/lists/linux-input/msg23077.html > > so please either switch over, or go with unmanaged resources > throughout. Will switch to the managed protocol throughout. >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_OF > Since we require DT this ifdef is not needed. Will remove. >> +static const struct of_device_id smsc_keypad_dt_match[] = { >> + { .compatible = "smsc,keypad" }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, smsc_keypad_dt_match); >> +#endif >> + >> +static struct platform_driver smsc_driver = { >> + .driver = { >> + .name = "smsc-keypad", >> + .of_match_table = of_match_ptr(smsc_keypad_dt_match), >> + .owner = THIS_MODULE, >> + }, >> + .probe = smsc_probe, >> + .remove = __devexit_p(smsc_remove), >> +}; >> + >> +module_platform_driver(smsc_driver); >> + >> +MODULE_AUTHOR("G Kondaiah Manjunath <manjugk@ti.com>"); >> +MODULE_DESCRIPTION("SMSC ECE1099 Keypad driver"); >> +MODULE_LICENSE("GPL v2"); >> -- >> 1.7.1 >> > Thanks. > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c50fa75..e370b03 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -593,6 +593,18 @@ config KEYBOARD_TWL4030 To compile this driver as a module, choose M here: the module will be called twl4030_keypad. +config KEYBOARD_SMSC + tristate "SMSC ECE1099 keypad support" + depends on I2C + select INPUT_MATRIXKMAP + help + Say Y here if your board use the smsc keypad controller + for omap5 defconfig. It's safe to say enable this + even on boards that don't use the keypad controller. + + To compile this driver as a module, choose M here: the + module will be called smsc-ece1099-keypad. + config KEYBOARD_XTKBD tristate "XT keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 44e7600..0f2aa26 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o +obj-$(CONFIG_KEYBOARD_SMSC) += smsc-ece1099-keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/smsc-ece1099-keypad.c b/drivers/input/keyboard/smsc-ece1099-keypad.c new file mode 100644 index 0000000..a4a0dfe --- /dev/null +++ b/drivers/input/keyboard/smsc-ece1099-keypad.c @@ -0,0 +1,303 @@ +/* + * SMSC_ECE1099 Keypad driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/input/matrix_keypad.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> +#include <linux/mfd/smsc.h> +#include <linux/of_gpio.h> +#include <linux/of.h> + +#define KEYPRESS_TIME 200 + +struct smsc_keypad { + struct smsc *smsc; + struct matrix_keymap_data *keymap_data; + unsigned int last_key_state[16]; + unsigned int last_col; + unsigned int last_key_ms[16]; + unsigned short *keymap; + struct i2c_client *client; + struct input_dev *input; + int rows, cols; + int row_shift; + bool no_autorepeat; + unsigned irq; + struct device *dev; +}; + +static void smsc_kp_scan(struct smsc_keypad *kp) +{ + struct input_dev *input = kp->input; + int i, j; + int row, col; + int temp, code; + unsigned int new_state[16]; + unsigned int bits_changed; + int this_ms; + + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0x00); + smsc_write(kp->dev, SMSC_KP_INT_STAT, 0xFF); + + /* Scan for row and column */ + for (i = 0; i < kp->cols; i++) { + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_EVAL + i); + /* Read Row Status */ + smsc_read(kp->dev, SMSC_KP_IN, &temp); + if (temp == 0xFF) + continue; + + col = i; + for (j = 0; j < kp->rows; j++) { + if ((temp & 0x01) != 0x00) { + temp = temp >> 1; + continue; + } + + row = j; + new_state[col] = (1 << row); + bits_changed = kp->last_key_state[col] ^ new_state[col]; + this_ms = jiffies_to_msecs(jiffies); + if (bits_changed != 0 || (!bits_changed && + ((this_ms - kp->last_key_ms[col]) >= KEYPRESS_TIME))) { + code = MATRIX_SCAN_CODE(row, col, kp->row_shift); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, kp->keymap[code], 1); + input_report_key(input, kp->keymap[code], 0); + kp->last_key_state[col] = new_state[col]; + if (kp->last_col != col) + kp->last_key_state[kp->last_col] = 0; + kp->last_key_ms[col] = this_ms; + } + temp = temp >> 1; + } + } + input_sync(input); + + smsc_write(kp->dev, SMSC_KP_INT_MASK, 0xFF); + + /* Set up Low Power Mode (Wake-up) (0xFB) */ + smsc_write(kp->dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); + + /*Enable Keypad Scan (generate interrupt on key press) (0x40)*/ + smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); +} + +static irqreturn_t do_kp_irq(int irq, void *_kp) +{ + struct smsc_keypad *kp = _kp; + int int_status; + + smsc_read(kp->dev, SMSC_KP_INT_STAT, &int_status); + if (int_status) + smsc_kp_scan(kp); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_OF +static int __devinit smsc_keypad_parse_dt(struct device *dev, + struct smsc_keypad *kp) +{ + struct device_node *np = dev->of_node; + + if (!np) { + dev_err(dev, "missing DT data"); + return -EINVAL; + } + + of_property_read_u32(np, "keypad,num-rows", &kp->rows); + of_property_read_u32(np, "keypad,num-columns", &kp->cols); + if (!kp->rows || !kp->cols) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return -EINVAL; + } + + if (of_property_read_bool(np, "linux,input-no-autorepeat")) + kp->no_autorepeat = true; + + return 0; +} +#else +static inline int smsc_keypad_parse_dt(struct device *dev, + struct smsc_keypad *kp) +{ + return -ENOSYS; +} +#endif + +static int __devinit +smsc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct smsc *smsc = dev_get_drvdata(pdev->dev.parent); + struct input_dev *input; + struct smsc_keypad *kp; + int ret = 0; + int i, max_keys, row_shift; + int irq; + int addr; + + kp = devm_kzalloc(dev, sizeof(*kp), GFP_KERNEL); + + input = input_allocate_device(); + if (!kp || !input) { + ret = -ENOMEM; + goto err1; + } + + ret = smsc_keypad_parse_dt(&pdev->dev, kp); + if (ret) + goto err1; + + /* Get the debug Device */ + kp->input = input; + kp->smsc = smsc; + kp->irq = platform_get_irq(pdev, 0); + kp->dev = dev; + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + /* Enable auto repeat feature of Linux input subsystem */ + if (!kp->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + input_set_capability(input, EV_MSC, MSC_SCAN); + input->name = "SMSC Keypad"; + input->phys = "smsc_keypad/input0"; + input->dev.parent = &pdev->dev; + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0003; + + /* Mask all GPIO interrupts (0x37-0x3B) */ + for (addr = SMSC_GPIO_INT_MASK_START; + addr < SMSC_GPIO_INT_MASK_START + 4; addr++) + smsc_write(dev, addr, 0); + + /* Set all outputs high (0x05-0x09) */ + for (addr = SMSC_GPIO_DATA_OUT_START; + addr < SMSC_GPIO_DATA_OUT_START + 4; addr++) + smsc_write(dev, addr, 0xff); + + /* Clear all GPIO interrupts (0x32-0x36) */ + for (addr = SMSC_GPIO_INT_STAT_START; + addr < SMSC_GPIO_INT_STAT_START + 4; addr++) + smsc_write(dev, addr, 0xff); + + /* Configure the smsc pins as Keyboard scan Input */ + for (i = 0; i <= kp->rows; i++) { + addr = 0x12 + i; + smsc_write(dev, addr, SMSC_KP_KSI); + } + + /* Configure the smsc pins as Keyboard scan output */ + for (i = 0; i <= kp->cols; i++) { + addr = 0x1A + i; + smsc_write(dev, addr, SMSC_KP_KSO); + } + + smsc_write(dev, SMSC_KP_INT_STAT, SMSC_KP_SET_HIGH); + smsc_write(dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR); + smsc_write(dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW); + + row_shift = get_count_order(kp->cols); + max_keys = kp->rows << row_shift; + + kp->row_shift = row_shift; + kp->keymap = devm_kzalloc(dev, max_keys * sizeof(kp->keymap[0]), + GFP_KERNEL); + if (!kp->keymap) { + dev_err(&pdev->dev, "Not enough memory for keymap\n"); + ret = -ENOMEM; + } + + ret = matrix_keypad_build_keymap(NULL, NULL, kp->rows, + kp->cols, kp->keymap, input); + if (ret) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err1; + } + + /* + * This ISR will always execute in kernel thread context because of + * the need to access the SMSC over the I2C bus. + */ + ret = devm_request_threaded_irq(dev, kp->irq, NULL, do_kp_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, pdev->name, kp); + if (ret) { + dev_dbg(&pdev->dev, "request_irq failed for irq no=%d\n", + irq); + goto err1; + } + + /* Enable smsc keypad interrupts */ + ret = smsc_write(dev, SMSC_KP_INT_MASK, 0xff); + if (ret < 0) + goto err2; + + ret = input_register_device(input); + if (ret) { + dev_err(kp->dev, + "Unable to register twl4030 keypad device\n"); + goto err2; + } + + return 0; + +err2: + free_irq(kp->irq, kp); +err1: + input_free_device(input); + return ret; +} + +static int __devexit smsc_remove(struct platform_device *pdev) +{ + struct smsc_keypad *kp = platform_get_drvdata(pdev); + input_unregister_device(kp->input); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id smsc_keypad_dt_match[] = { + { .compatible = "smsc,keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, smsc_keypad_dt_match); +#endif + +static struct platform_driver smsc_driver = { + .driver = { + .name = "smsc-keypad", + .of_match_table = of_match_ptr(smsc_keypad_dt_match), + .owner = THIS_MODULE, + }, + .probe = smsc_probe, + .remove = __devexit_p(smsc_remove), +}; + +module_platform_driver(smsc_driver); + +MODULE_AUTHOR("G Kondaiah Manjunath <manjugk@ti.com>"); +MODULE_DESCRIPTION("SMSC ECE1099 Keypad driver"); +MODULE_LICENSE("GPL v2");