diff mbox

[v5,4/5] iommu/omap: adapt to runtime pm

Message ID 1353373552-16039-5-git-send-email-omar.luna@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Omar Ramirez Luna Nov. 20, 2012, 1:05 a.m. UTC
Use runtime PM functionality interfaced with hwmod enable/idle
functions, to replace direct clock operations and sysconfig
handling.

Due to reset sequence, pm_runtime_[get|put]_sync must be used, to
avoid possible operations with the module under reset. Because of
this and given that the driver uses spin_locks to protect their
critical sections, we must use pm_runtime_irq_safe in order for the
runtime ops to be happy, otherwise might_sleep_if checks in runtime
framework will complain.

The remaining pm_runtime out of iommu_enable and iommu_disable
corresponds to paths that can be accessed through debugfs, some of
them doesn't work if the module is not enabled first, but in future
if the mmu is idled withouth freeing, these are needed to debug.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
---
 arch/arm/mach-omap2/omap-iommu.c         |    1 -
 drivers/iommu/omap-iommu.c               |   40 ++++++++++++++---------------
 drivers/iommu/omap-iommu.h               |    3 --
 drivers/iommu/omap-iommu2.c              |   17 ------------
 include/linux/platform_data/iommu-omap.h |    1 -
 5 files changed, 19 insertions(+), 43 deletions(-)

Comments

Tony Lindgren Nov. 21, 2012, 6:50 p.m. UTC | #1
* Omar Ramirez Luna <omar.luna@linaro.org> [121119 17:08]:
> Use runtime PM functionality interfaced with hwmod enable/idle
> functions, to replace direct clock operations and sysconfig
> handling.
> 
> Due to reset sequence, pm_runtime_[get|put]_sync must be used, to
> avoid possible operations with the module under reset. Because of
> this and given that the driver uses spin_locks to protect their
> critical sections, we must use pm_runtime_irq_safe in order for the
> runtime ops to be happy, otherwise might_sleep_if checks in runtime
> framework will complain.
> 
> The remaining pm_runtime out of iommu_enable and iommu_disable
> corresponds to paths that can be accessed through debugfs, some of
> them doesn't work if the module is not enabled first, but in future
> if the mmu is idled withouth freeing, these are needed to debug.
> 
> Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
> ---
>  arch/arm/mach-omap2/omap-iommu.c         |    1 -
>  drivers/iommu/omap-iommu.c               |   40 ++++++++++++++---------------
>  drivers/iommu/omap-iommu.h               |    3 --
>  drivers/iommu/omap-iommu2.c              |   17 ------------
>  include/linux/platform_data/iommu-omap.h |    1 -
>  5 files changed, 19 insertions(+), 43 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
> index 02726a6..7642fc4 100644
> --- a/arch/arm/mach-omap2/omap-iommu.c
> +++ b/arch/arm/mach-omap2/omap-iommu.c
> @@ -31,7 +31,6 @@ static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
>  		return -ENOMEM;
>  
>  	pdata->name = oh->name;
> -	pdata->clk_name = oh->main_clk;
>  	pdata->nr_tlb_entries = a->nr_tlb_entries;
>  	pdata->da_start = a->da_start;
>  	pdata->da_end = a->da_end;

The runtime PM related changes would be good to be checked
by Kevin, added him to cc. For the arch/arm/mach-omap2/ change above:

Acked-by: Tony Lindgren <tony@atomide.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Felipe Contreras Nov. 22, 2012, 2:47 a.m. UTC | #2
On Tue, Nov 20, 2012 at 2:05 AM, Omar Ramirez Luna <omar.luna@linaro.org> wrote:

> @@ -1022,7 +1019,8 @@ static int __devexit omap_iommu_remove(struct platform_device *pdev)
>         release_mem_region(res->start, resource_size(res));
>         iounmap(obj->regbase);
>
> -       clk_put(obj->clk);
> +       pm_runtime_disable(obj->dev);
> +
>         dev_info(&pdev->dev, "%s removed\n", obj->name);
>         kfree(obj);
>         return 0;

I still believe this is not needed. The device framework does that
when removing the device, and does it more properly, with
__pm_runtime_disable(dev, false).

Cheers.
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 02726a6..7642fc4 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -31,7 +31,6 @@  static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
 		return -ENOMEM;
 
 	pdata->name = oh->name;
-	pdata->clk_name = oh->main_clk;
 	pdata->nr_tlb_entries = a->nr_tlb_entries;
 	pdata->da_start = a->da_start;
 	pdata->da_end = a->da_end;
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index af9b4f3..18108c14 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -16,13 +16,13 @@ 
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/iommu.h>
 #include <linux/omap-iommu.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/cacheflush.h>
 
@@ -160,7 +160,7 @@  static int iommu_enable(struct omap_iommu *obj)
 		}
 	}
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 
 	err = arch_iommu->enable(obj);
 
@@ -177,7 +177,7 @@  static void iommu_disable(struct omap_iommu *obj)
 
 	arch_iommu->disable(obj);
 
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 
 	if (pdata->assert_reset)
 		pdata->assert_reset(pdev, pdata->reset_name);
@@ -303,7 +303,7 @@  static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
 	if (!obj || !obj->nr_tlb_entries || !e)
 		return -EINVAL;
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 
 	iotlb_lock_get(obj, &l);
 	if (l.base == obj->nr_tlb_entries) {
@@ -333,7 +333,7 @@  static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
 
 	cr = iotlb_alloc_cr(obj, e);
 	if (IS_ERR(cr)) {
-		clk_disable(obj->clk);
+		pm_runtime_put_sync(obj->dev);
 		return PTR_ERR(cr);
 	}
 
@@ -347,7 +347,7 @@  static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
 		l.vict = l.base;
 	iotlb_lock_set(obj, &l);
 out:
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 	return err;
 }
 
@@ -377,7 +377,7 @@  static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
 	int i;
 	struct cr_regs cr;
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 
 	for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
 		u32 start;
@@ -396,7 +396,7 @@  static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 
 	if (i == obj->nr_tlb_entries)
 		dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
@@ -410,7 +410,7 @@  static void flush_iotlb_all(struct omap_iommu *obj)
 {
 	struct iotlb_lock l;
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 
 	l.base = 0;
 	l.vict = 0;
@@ -418,7 +418,7 @@  static void flush_iotlb_all(struct omap_iommu *obj)
 
 	iommu_write_reg(obj, 1, MMU_GFLUSH);
 
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 }
 
 #if defined(CONFIG_OMAP_IOMMU_DEBUG) || defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
@@ -428,11 +428,11 @@  ssize_t omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t bytes)
 	if (!obj || !buf)
 		return -EINVAL;
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 
 	bytes = arch_iommu->dump_ctx(obj, buf, bytes);
 
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 
 	return bytes;
 }
@@ -446,7 +446,7 @@  __dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
 	struct cr_regs tmp;
 	struct cr_regs *p = crs;
 
-	clk_enable(obj->clk);
+	pm_runtime_get_sync(obj->dev);
 	iotlb_lock_get(obj, &saved);
 
 	for_each_iotlb_cr(obj, num, i, tmp) {
@@ -456,7 +456,7 @@  __dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
 	}
 
 	iotlb_lock_set(obj, &saved);
-	clk_disable(obj->clk);
+	pm_runtime_put_sync(obj->dev);
 
 	return  p - crs;
 }
@@ -946,10 +946,6 @@  static int __devinit omap_iommu_probe(struct platform_device *pdev)
 	if (!obj)
 		return -ENOMEM;
 
-	obj->clk = clk_get(&pdev->dev, pdata->clk_name);
-	if (IS_ERR(obj->clk))
-		goto err_clk;
-
 	obj->nr_tlb_entries = pdata->nr_tlb_entries;
 	obj->name = pdata->name;
 	obj->dev = &pdev->dev;
@@ -992,6 +988,9 @@  static int __devinit omap_iommu_probe(struct platform_device *pdev)
 		goto err_irq;
 	platform_set_drvdata(pdev, obj);
 
+	pm_runtime_irq_safe(obj->dev);
+	pm_runtime_enable(obj->dev);
+
 	dev_info(&pdev->dev, "%s registered\n", obj->name);
 	return 0;
 
@@ -1000,8 +999,6 @@  err_irq:
 err_ioremap:
 	release_mem_region(res->start, resource_size(res));
 err_mem:
-	clk_put(obj->clk);
-err_clk:
 	kfree(obj);
 	return err;
 }
@@ -1022,7 +1019,8 @@  static int __devexit omap_iommu_remove(struct platform_device *pdev)
 	release_mem_region(res->start, resource_size(res));
 	iounmap(obj->regbase);
 
-	clk_put(obj->clk);
+	pm_runtime_disable(obj->dev);
+
 	dev_info(&pdev->dev, "%s removed\n", obj->name);
 	kfree(obj);
 	return 0;
diff --git a/drivers/iommu/omap-iommu.h b/drivers/iommu/omap-iommu.h
index 2b5f3c0..1200842 100644
--- a/drivers/iommu/omap-iommu.h
+++ b/drivers/iommu/omap-iommu.h
@@ -29,7 +29,6 @@  struct iotlb_entry {
 struct omap_iommu {
 	const char	*name;
 	struct module	*owner;
-	struct clk	*clk;
 	void __iomem	*regbase;
 	struct device	*dev;
 	void		*isr_priv;
@@ -116,8 +115,6 @@  static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
  * MMU Register offsets
  */
 #define MMU_REVISION		0x00
-#define MMU_SYSCONFIG		0x10
-#define MMU_SYSSTATUS		0x14
 #define MMU_IRQSTATUS		0x18
 #define MMU_IRQENABLE		0x1c
 #define MMU_WALKING_ST		0x40
diff --git a/drivers/iommu/omap-iommu2.c b/drivers/iommu/omap-iommu2.c
index 4a3a1c7..d745094 100644
--- a/drivers/iommu/omap-iommu2.c
+++ b/drivers/iommu/omap-iommu2.c
@@ -28,15 +28,6 @@ 
  */
 #define IOMMU_ARCH_VERSION	0x00000011
 
-/* SYSCONF */
-#define MMU_SYS_IDLE_SHIFT	3
-#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
-
-#define MMU_SYS_AUTOIDLE	1
-
 /* IRQSTATUS & IRQENABLE */
 #define MMU_IRQ_MULTIHITFAULT	(1 << 4)
 #define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
@@ -105,11 +96,6 @@  static int omap2_iommu_enable(struct omap_iommu *obj)
 	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
 		 (l >> 4) & 0xf, l & 0xf);
 
-	l = iommu_read_reg(obj, MMU_SYSCONFIG);
-	l &= ~MMU_SYS_IDLE_MASK;
-	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
-	iommu_write_reg(obj, l, MMU_SYSCONFIG);
-
 	iommu_write_reg(obj, pa, MMU_TTB);
 
 	__iommu_set_twl(obj, true);
@@ -123,7 +109,6 @@  static void omap2_iommu_disable(struct omap_iommu *obj)
 
 	l &= ~MMU_CNTL_MASK;
 	iommu_write_reg(obj, l, MMU_CNTL);
-	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
 
 	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
 }
@@ -252,8 +237,6 @@  omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len)
 	char *p = buf;
 
 	pr_reg(REVISION);
-	pr_reg(SYSCONFIG);
-	pr_reg(SYSSTATUS);
 	pr_reg(IRQSTATUS);
 	pr_reg(IRQENABLE);
 	pr_reg(WALKING_ST);
diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h
index ef2060d..5b429c4 100644
--- a/include/linux/platform_data/iommu-omap.h
+++ b/include/linux/platform_data/iommu-omap.h
@@ -44,7 +44,6 @@  struct omap_mmu_dev_attr {
 
 struct iommu_platform_data {
 	const char *name;
-	const char *clk_name;
 	const char *reset_name;
 	int nr_tlb_entries;
 	u32 da_start;