diff mbox

[RFC,v2,03/18] memory: emif: Move EMIF related header file to include/linux/

Message ID 1356959231-17335-4-git-send-email-vaibhav.bedia@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Vaibhav Bedia Dec. 31, 2012, 1:06 p.m. UTC
OMAP4 and AM33XX share the same EMIF controller IP. Although there
are significant differences in the IP integration due to which
AM33XX can't reuse the EMIF driver DVFS similar to OMAP4,
it can definitely benefit by reusing the EMIF related macros
defined in drivers/memory/emif.h.

In the current OMAP PM framework the PM code resides under
arch/arm/mach-omap2/. To enable reuse of the register defines move
the emif header file to include/linux so that both the EMIF driver
and the AM33XX PM code can benefit.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Aneesh V <aneesh@ti.com>
---
v1->v2:
	This is a new patch in the series to enable code reuse
	between the EMIF driver and AM33XX PM code

 drivers/memory/emif.c   |    2 +-
 drivers/memory/emif.h   |  589 -----------------------------------------------
 include/linux/ti_emif.h |  589 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 590 insertions(+), 590 deletions(-)
 delete mode 100644 drivers/memory/emif.h
 create mode 100644 include/linux/ti_emif.h

Comments

Santosh Shilimkar Jan. 8, 2013, 2:04 p.m. UTC | #1
On Monday 31 December 2012 06:36 PM, Vaibhav Bedia wrote:
> OMAP4 and AM33XX share the same EMIF controller IP. Although there
> are significant differences in the IP integration due to which
> AM33XX can't reuse the EMIF driver DVFS similar to OMAP4,
> it can definitely benefit by reusing the EMIF related macros
> defined in drivers/memory/emif.h.
>
> In the current OMAP PM framework the PM code resides under
> arch/arm/mach-omap2/. To enable reuse of the register defines move
> the emif header file to include/linux so that both the EMIF driver
> and the AM33XX PM code can benefit.
>
> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Aneesh V <aneesh@ti.com>
> ---
> v1->v2:
> 	This is a new patch in the series to enable code reuse
> 	between the EMIF driver and AM33XX PM code
>
>   drivers/memory/emif.c   |    2 +-
>   drivers/memory/emif.h   |  589 -----------------------------------------------
>   include/linux/ti_emif.h |  589 +++++++++++++++++++++++++++++++++++++++++++++++
You are just moving the file. So "git mv file1 flie2; and the git 
format-patch -C"
on committed patch should just generate few lines of patch.

> +/* DDR_PHY_CTRL_1 - EMIF4D5 */
> +#define DLL_HALF_DELAY_SHIFT_4D5			21
> +#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
> +#define READ_LATENCY_SHIFT_4D5				0
> +#define READ_LATENCY_MASK_4D5				(0x1f << 0)
> +
> +/* DDR_PHY_CTRL_1_SHDW */
> +#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
> +#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
> +#define READ_LATENCY_SHDW_SHIFT				0
> +#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
> +
> +#ifndef __ASSEMBLY__
> +/*
> + * Structure containing shadow of important registers in EMIF
> + * The calculation function fills in this structure to be later used for
> + * initialisation and DVFS
> + */
> +struct emif_regs {
Are you using above struct. If not we can leave it in same place and
just move the register defines.

Regards
santosh

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Vaibhav Bedia Jan. 9, 2013, 5:31 a.m. UTC | #2
On Tue, Jan 08, 2013 at 19:34:41, Shilimkar, Santosh wrote:
[...]
> >
> >   drivers/memory/emif.c   |    2 +-
> >   drivers/memory/emif.h   |  589 -----------------------------------------------
> >   include/linux/ti_emif.h |  589 +++++++++++++++++++++++++++++++++++++++++++++++
> You are just moving the file. So "git mv file1 flie2; and the git 
> format-patch -C"
> on committed patch should just generate few lines of patch.
> 

Ok. Didn't know about this.

> > +/* DDR_PHY_CTRL_1 - EMIF4D5 */
> > +#define DLL_HALF_DELAY_SHIFT_4D5			21
> > +#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
> > +#define READ_LATENCY_SHIFT_4D5				0
> > +#define READ_LATENCY_MASK_4D5				(0x1f << 0)
> > +
> > +/* DDR_PHY_CTRL_1_SHDW */
> > +#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
> > +#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
> > +#define READ_LATENCY_SHDW_SHIFT				0
> > +#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
> > +
> > +#ifndef __ASSEMBLY__
> > +/*
> > + * Structure containing shadow of important registers in EMIF
> > + * The calculation function fills in this structure to be later used for
> > + * initialisation and DVFS
> > + */
> > +struct emif_regs {
> Are you using above struct. If not we can leave it in same place and
> just move the register defines.
> 

No, the struct is not used. I'll leave it here in the next version.

Regards,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 06d31c9..a3d893d 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -24,8 +24,8 @@ 
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
+#include <linux/ti_emif.h>
 #include <memory/jedec_ddr.h>
-#include "emif.h"
 #include "of_memory.h"
 
 /**
diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h
deleted file mode 100644
index bfe08ba..0000000
--- a/drivers/memory/emif.h
+++ /dev/null
@@ -1,589 +0,0 @@ 
-/*
- * Defines for the EMIF driver
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __EMIF_H
-#define __EMIF_H
-
-/*
- * Maximum number of different frequencies supported by EMIF driver
- * Determines the number of entries in the pointer array for register
- * cache
- */
-#define EMIF_MAX_NUM_FREQUENCIES			6
-
-/* State of the core voltage */
-#define DDR_VOLTAGE_STABLE				0
-#define DDR_VOLTAGE_RAMPING				1
-
-/* Defines for timing De-rating */
-#define EMIF_NORMAL_TIMINGS				0
-#define EMIF_DERATED_TIMINGS				1
-
-/* Length of the forced read idle period in terms of cycles */
-#define EMIF_READ_IDLE_LEN_VAL				5
-
-/*
- * forced read idle interval to be used when voltage
- * is changed as part of DVFS/DPS - 1ms
- */
-#define READ_IDLE_INTERVAL_DVFS				(1*1000000)
-
-/*
- * Forced read idle interval to be used when voltage is stable
- * 50us - or maximum value will do
- */
-#define READ_IDLE_INTERVAL_NORMAL			(50*1000000)
-
-/* DLL calibration interval when voltage is NOT stable - 1us */
-#define DLL_CALIB_INTERVAL_DVFS				(1*1000000)
-
-#define DLL_CALIB_ACK_WAIT_VAL				5
-
-/* Interval between ZQCS commands - hw team recommended value */
-#define EMIF_ZQCS_INTERVAL_US				(50*1000)
-/* Enable ZQ Calibration on exiting Self-refresh */
-#define ZQ_SFEXITEN_ENABLE				1
-/*
- * ZQ Calibration simultaneously on both chip-selects:
- * Needs one calibration resistor per CS
- */
-#define	ZQ_DUALCALEN_DISABLE				0
-#define	ZQ_DUALCALEN_ENABLE				1
-
-#define T_ZQCS_DEFAULT_NS				90
-#define T_ZQCL_DEFAULT_NS				360
-#define T_ZQINIT_DEFAULT_NS				1000
-
-/* DPD_EN */
-#define DPD_DISABLE					0
-#define DPD_ENABLE					1
-
-/*
- * Default values for the low-power entry to be used if not provided by user.
- * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
- * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
- */
-#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE		2048
-#define EMIF_LP_MODE_TIMEOUT_POWER			512
-#define EMIF_LP_MODE_FREQ_THRESHOLD			400000000
-
-/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY		0x049FF000
-#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY	0x41
-#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY	0x80
-#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
-
-/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
-#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
-
-/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
-#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS		360
-
-#define EMIF_T_CSTA					3
-#define EMIF_T_PDLL_UL					128
-
-/* External PHY control registers magic values */
-#define EMIF_EXT_PHY_CTRL_1_VAL				0x04020080
-#define EMIF_EXT_PHY_CTRL_5_VAL				0x04010040
-#define EMIF_EXT_PHY_CTRL_6_VAL				0x01004010
-#define EMIF_EXT_PHY_CTRL_7_VAL				0x00001004
-#define EMIF_EXT_PHY_CTRL_8_VAL				0x04010040
-#define EMIF_EXT_PHY_CTRL_9_VAL				0x01004010
-#define EMIF_EXT_PHY_CTRL_10_VAL			0x00001004
-#define EMIF_EXT_PHY_CTRL_11_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_12_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_13_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_14_VAL			0x80080080
-#define EMIF_EXT_PHY_CTRL_15_VAL			0x00800800
-#define EMIF_EXT_PHY_CTRL_16_VAL			0x08102040
-#define EMIF_EXT_PHY_CTRL_17_VAL			0x00000001
-#define EMIF_EXT_PHY_CTRL_18_VAL			0x540A8150
-#define EMIF_EXT_PHY_CTRL_19_VAL			0xA81502A0
-#define EMIF_EXT_PHY_CTRL_20_VAL			0x002A0540
-#define EMIF_EXT_PHY_CTRL_21_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_22_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_23_VAL			0x00000000
-#define EMIF_EXT_PHY_CTRL_24_VAL			0x00000077
-
-#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS	1200
-
-/* Registers offset */
-#define EMIF_MODULE_ID_AND_REVISION			0x0000
-#define EMIF_STATUS					0x0004
-#define EMIF_SDRAM_CONFIG				0x0008
-#define EMIF_SDRAM_CONFIG_2				0x000c
-#define EMIF_SDRAM_REFRESH_CONTROL			0x0010
-#define EMIF_SDRAM_REFRESH_CTRL_SHDW			0x0014
-#define EMIF_SDRAM_TIMING_1				0x0018
-#define EMIF_SDRAM_TIMING_1_SHDW			0x001c
-#define EMIF_SDRAM_TIMING_2				0x0020
-#define EMIF_SDRAM_TIMING_2_SHDW			0x0024
-#define EMIF_SDRAM_TIMING_3				0x0028
-#define EMIF_SDRAM_TIMING_3_SHDW			0x002c
-#define EMIF_LPDDR2_NVM_TIMING				0x0030
-#define EMIF_LPDDR2_NVM_TIMING_SHDW			0x0034
-#define EMIF_POWER_MANAGEMENT_CONTROL			0x0038
-#define EMIF_POWER_MANAGEMENT_CTRL_SHDW			0x003c
-#define EMIF_LPDDR2_MODE_REG_DATA			0x0040
-#define EMIF_LPDDR2_MODE_REG_CONFIG			0x0050
-#define EMIF_OCP_CONFIG					0x0054
-#define EMIF_OCP_CONFIG_VALUE_1				0x0058
-#define EMIF_OCP_CONFIG_VALUE_2				0x005c
-#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL		0x0060
-#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT		0x0064
-#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT	0x0068
-#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1	0x006c
-#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2	0x0070
-#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3	0x0074
-#define EMIF_PERFORMANCE_COUNTER_1			0x0080
-#define EMIF_PERFORMANCE_COUNTER_2			0x0084
-#define EMIF_PERFORMANCE_COUNTER_CONFIG			0x0088
-#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT	0x008c
-#define EMIF_PERFORMANCE_COUNTER_TIME			0x0090
-#define EMIF_MISC_REG					0x0094
-#define EMIF_DLL_CALIB_CTRL				0x0098
-#define EMIF_DLL_CALIB_CTRL_SHDW			0x009c
-#define EMIF_END_OF_INTERRUPT				0x00a0
-#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS		0x00a4
-#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS		0x00a8
-#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS		0x00ac
-#define EMIF_LL_OCP_INTERRUPT_STATUS			0x00b0
-#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET		0x00b4
-#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET		0x00b8
-#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR		0x00bc
-#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR		0x00c0
-#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG	0x00c8
-#define EMIF_TEMPERATURE_ALERT_CONFIG			0x00cc
-#define EMIF_OCP_ERROR_LOG				0x00d0
-#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW		0x00d4
-#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL		0x00d8
-#define EMIF_READ_WRITE_LEVELING_CONTROL		0x00dc
-#define EMIF_DDR_PHY_CTRL_1				0x00e4
-#define EMIF_DDR_PHY_CTRL_1_SHDW			0x00e8
-#define EMIF_DDR_PHY_CTRL_2				0x00ec
-#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING	0x0100
-#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
-#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
-#define EMIF_READ_WRITE_EXECUTION_THRESHOLD		0x0120
-#define EMIF_COS_CONFIG					0x0124
-#define EMIF_PHY_STATUS_1				0x0140
-#define EMIF_PHY_STATUS_2				0x0144
-#define EMIF_PHY_STATUS_3				0x0148
-#define EMIF_PHY_STATUS_4				0x014c
-#define EMIF_PHY_STATUS_5				0x0150
-#define EMIF_PHY_STATUS_6				0x0154
-#define EMIF_PHY_STATUS_7				0x0158
-#define EMIF_PHY_STATUS_8				0x015c
-#define EMIF_PHY_STATUS_9				0x0160
-#define EMIF_PHY_STATUS_10				0x0164
-#define EMIF_PHY_STATUS_11				0x0168
-#define EMIF_PHY_STATUS_12				0x016c
-#define EMIF_PHY_STATUS_13				0x0170
-#define EMIF_PHY_STATUS_14				0x0174
-#define EMIF_PHY_STATUS_15				0x0178
-#define EMIF_PHY_STATUS_16				0x017c
-#define EMIF_PHY_STATUS_17				0x0180
-#define EMIF_PHY_STATUS_18				0x0184
-#define EMIF_PHY_STATUS_19				0x0188
-#define EMIF_PHY_STATUS_20				0x018c
-#define EMIF_PHY_STATUS_21				0x0190
-#define EMIF_EXT_PHY_CTRL_1				0x0200
-#define EMIF_EXT_PHY_CTRL_1_SHDW			0x0204
-#define EMIF_EXT_PHY_CTRL_2				0x0208
-#define EMIF_EXT_PHY_CTRL_2_SHDW			0x020c
-#define EMIF_EXT_PHY_CTRL_3				0x0210
-#define EMIF_EXT_PHY_CTRL_3_SHDW			0x0214
-#define EMIF_EXT_PHY_CTRL_4				0x0218
-#define EMIF_EXT_PHY_CTRL_4_SHDW			0x021c
-#define EMIF_EXT_PHY_CTRL_5				0x0220
-#define EMIF_EXT_PHY_CTRL_5_SHDW			0x0224
-#define EMIF_EXT_PHY_CTRL_6				0x0228
-#define EMIF_EXT_PHY_CTRL_6_SHDW			0x022c
-#define EMIF_EXT_PHY_CTRL_7				0x0230
-#define EMIF_EXT_PHY_CTRL_7_SHDW			0x0234
-#define EMIF_EXT_PHY_CTRL_8				0x0238
-#define EMIF_EXT_PHY_CTRL_8_SHDW			0x023c
-#define EMIF_EXT_PHY_CTRL_9				0x0240
-#define EMIF_EXT_PHY_CTRL_9_SHDW			0x0244
-#define EMIF_EXT_PHY_CTRL_10				0x0248
-#define EMIF_EXT_PHY_CTRL_10_SHDW			0x024c
-#define EMIF_EXT_PHY_CTRL_11				0x0250
-#define EMIF_EXT_PHY_CTRL_11_SHDW			0x0254
-#define EMIF_EXT_PHY_CTRL_12				0x0258
-#define EMIF_EXT_PHY_CTRL_12_SHDW			0x025c
-#define EMIF_EXT_PHY_CTRL_13				0x0260
-#define EMIF_EXT_PHY_CTRL_13_SHDW			0x0264
-#define EMIF_EXT_PHY_CTRL_14				0x0268
-#define EMIF_EXT_PHY_CTRL_14_SHDW			0x026c
-#define EMIF_EXT_PHY_CTRL_15				0x0270
-#define EMIF_EXT_PHY_CTRL_15_SHDW			0x0274
-#define EMIF_EXT_PHY_CTRL_16				0x0278
-#define EMIF_EXT_PHY_CTRL_16_SHDW			0x027c
-#define EMIF_EXT_PHY_CTRL_17				0x0280
-#define EMIF_EXT_PHY_CTRL_17_SHDW			0x0284
-#define EMIF_EXT_PHY_CTRL_18				0x0288
-#define EMIF_EXT_PHY_CTRL_18_SHDW			0x028c
-#define EMIF_EXT_PHY_CTRL_19				0x0290
-#define EMIF_EXT_PHY_CTRL_19_SHDW			0x0294
-#define EMIF_EXT_PHY_CTRL_20				0x0298
-#define EMIF_EXT_PHY_CTRL_20_SHDW			0x029c
-#define EMIF_EXT_PHY_CTRL_21				0x02a0
-#define EMIF_EXT_PHY_CTRL_21_SHDW			0x02a4
-#define EMIF_EXT_PHY_CTRL_22				0x02a8
-#define EMIF_EXT_PHY_CTRL_22_SHDW			0x02ac
-#define EMIF_EXT_PHY_CTRL_23				0x02b0
-#define EMIF_EXT_PHY_CTRL_23_SHDW			0x02b4
-#define EMIF_EXT_PHY_CTRL_24				0x02b8
-#define EMIF_EXT_PHY_CTRL_24_SHDW			0x02bc
-#define EMIF_EXT_PHY_CTRL_25				0x02c0
-#define EMIF_EXT_PHY_CTRL_25_SHDW			0x02c4
-#define EMIF_EXT_PHY_CTRL_26				0x02c8
-#define EMIF_EXT_PHY_CTRL_26_SHDW			0x02cc
-#define EMIF_EXT_PHY_CTRL_27				0x02d0
-#define EMIF_EXT_PHY_CTRL_27_SHDW			0x02d4
-#define EMIF_EXT_PHY_CTRL_28				0x02d8
-#define EMIF_EXT_PHY_CTRL_28_SHDW			0x02dc
-#define EMIF_EXT_PHY_CTRL_29				0x02e0
-#define EMIF_EXT_PHY_CTRL_29_SHDW			0x02e4
-#define EMIF_EXT_PHY_CTRL_30				0x02e8
-#define EMIF_EXT_PHY_CTRL_30_SHDW			0x02ec
-
-/* Registers shifts and masks */
-
-/* EMIF_MODULE_ID_AND_REVISION */
-#define SCHEME_SHIFT					30
-#define SCHEME_MASK					(0x3 << 30)
-#define MODULE_ID_SHIFT					16
-#define MODULE_ID_MASK					(0xfff << 16)
-#define RTL_VERSION_SHIFT				11
-#define RTL_VERSION_MASK				(0x1f << 11)
-#define MAJOR_REVISION_SHIFT				8
-#define MAJOR_REVISION_MASK				(0x7 << 8)
-#define MINOR_REVISION_SHIFT				0
-#define MINOR_REVISION_MASK				(0x3f << 0)
-
-/* STATUS */
-#define BE_SHIFT					31
-#define BE_MASK						(1 << 31)
-#define DUAL_CLK_MODE_SHIFT				30
-#define DUAL_CLK_MODE_MASK				(1 << 30)
-#define FAST_INIT_SHIFT					29
-#define FAST_INIT_MASK					(1 << 29)
-#define RDLVLGATETO_SHIFT				6
-#define RDLVLGATETO_MASK				(1 << 6)
-#define RDLVLTO_SHIFT					5
-#define RDLVLTO_MASK					(1 << 5)
-#define WRLVLTO_SHIFT					4
-#define WRLVLTO_MASK					(1 << 4)
-#define PHY_DLL_READY_SHIFT				2
-#define PHY_DLL_READY_MASK				(1 << 2)
-
-/* SDRAM_CONFIG */
-#define SDRAM_TYPE_SHIFT				29
-#define SDRAM_TYPE_MASK					(0x7 << 29)
-#define IBANK_POS_SHIFT					27
-#define IBANK_POS_MASK					(0x3 << 27)
-#define DDR_TERM_SHIFT					24
-#define DDR_TERM_MASK					(0x7 << 24)
-#define DDR2_DDQS_SHIFT					23
-#define DDR2_DDQS_MASK					(1 << 23)
-#define DYN_ODT_SHIFT					21
-#define DYN_ODT_MASK					(0x3 << 21)
-#define DDR_DISABLE_DLL_SHIFT				20
-#define DDR_DISABLE_DLL_MASK				(1 << 20)
-#define SDRAM_DRIVE_SHIFT				18
-#define SDRAM_DRIVE_MASK				(0x3 << 18)
-#define CWL_SHIFT					16
-#define CWL_MASK					(0x3 << 16)
-#define NARROW_MODE_SHIFT				14
-#define NARROW_MODE_MASK				(0x3 << 14)
-#define CL_SHIFT					10
-#define CL_MASK						(0xf << 10)
-#define ROWSIZE_SHIFT					7
-#define ROWSIZE_MASK					(0x7 << 7)
-#define IBANK_SHIFT					4
-#define IBANK_MASK					(0x7 << 4)
-#define EBANK_SHIFT					3
-#define EBANK_MASK					(1 << 3)
-#define PAGESIZE_SHIFT					0
-#define PAGESIZE_MASK					(0x7 << 0)
-
-/* SDRAM_CONFIG_2 */
-#define CS1NVMEN_SHIFT					30
-#define CS1NVMEN_MASK					(1 << 30)
-#define EBANK_POS_SHIFT					27
-#define EBANK_POS_MASK					(1 << 27)
-#define RDBNUM_SHIFT					4
-#define RDBNUM_MASK					(0x3 << 4)
-#define RDBSIZE_SHIFT					0
-#define RDBSIZE_MASK					(0x7 << 0)
-
-/* SDRAM_REFRESH_CONTROL */
-#define INITREF_DIS_SHIFT				31
-#define INITREF_DIS_MASK				(1 << 31)
-#define SRT_SHIFT					29
-#define SRT_MASK					(1 << 29)
-#define ASR_SHIFT					28
-#define ASR_MASK					(1 << 28)
-#define PASR_SHIFT					24
-#define PASR_MASK					(0x7 << 24)
-#define REFRESH_RATE_SHIFT				0
-#define REFRESH_RATE_MASK				(0xffff << 0)
-
-/* SDRAM_TIMING_1 */
-#define T_RTW_SHIFT					29
-#define T_RTW_MASK					(0x7 << 29)
-#define T_RP_SHIFT					25
-#define T_RP_MASK					(0xf << 25)
-#define T_RCD_SHIFT					21
-#define T_RCD_MASK					(0xf << 21)
-#define T_WR_SHIFT					17
-#define T_WR_MASK					(0xf << 17)
-#define T_RAS_SHIFT					12
-#define T_RAS_MASK					(0x1f << 12)
-#define T_RC_SHIFT					6
-#define T_RC_MASK					(0x3f << 6)
-#define T_RRD_SHIFT					3
-#define T_RRD_MASK					(0x7 << 3)
-#define T_WTR_SHIFT					0
-#define T_WTR_MASK					(0x7 << 0)
-
-/* SDRAM_TIMING_2 */
-#define T_XP_SHIFT					28
-#define T_XP_MASK					(0x7 << 28)
-#define T_ODT_SHIFT					25
-#define T_ODT_MASK					(0x7 << 25)
-#define T_XSNR_SHIFT					16
-#define T_XSNR_MASK					(0x1ff << 16)
-#define T_XSRD_SHIFT					6
-#define T_XSRD_MASK					(0x3ff << 6)
-#define T_RTP_SHIFT					3
-#define T_RTP_MASK					(0x7 << 3)
-#define T_CKE_SHIFT					0
-#define T_CKE_MASK					(0x7 << 0)
-
-/* SDRAM_TIMING_3 */
-#define T_PDLL_UL_SHIFT					28
-#define T_PDLL_UL_MASK					(0xf << 28)
-#define T_CSTA_SHIFT					24
-#define T_CSTA_MASK					(0xf << 24)
-#define T_CKESR_SHIFT					21
-#define T_CKESR_MASK					(0x7 << 21)
-#define ZQ_ZQCS_SHIFT					15
-#define ZQ_ZQCS_MASK					(0x3f << 15)
-#define T_TDQSCKMAX_SHIFT				13
-#define T_TDQSCKMAX_MASK				(0x3 << 13)
-#define T_RFC_SHIFT					4
-#define T_RFC_MASK					(0x1ff << 4)
-#define T_RAS_MAX_SHIFT					0
-#define T_RAS_MAX_MASK					(0xf << 0)
-
-/* POWER_MANAGEMENT_CONTROL */
-#define PD_TIM_SHIFT					12
-#define PD_TIM_MASK					(0xf << 12)
-#define DPD_EN_SHIFT					11
-#define DPD_EN_MASK					(1 << 11)
-#define LP_MODE_SHIFT					8
-#define LP_MODE_MASK					(0x7 << 8)
-#define SR_TIM_SHIFT					4
-#define SR_TIM_MASK					(0xf << 4)
-#define CS_TIM_SHIFT					0
-#define CS_TIM_MASK					(0xf << 0)
-
-/* LPDDR2_MODE_REG_DATA */
-#define VALUE_0_SHIFT					0
-#define VALUE_0_MASK					(0x7f << 0)
-
-/* LPDDR2_MODE_REG_CONFIG */
-#define CS_SHIFT					31
-#define CS_MASK						(1 << 31)
-#define REFRESH_EN_SHIFT				30
-#define REFRESH_EN_MASK					(1 << 30)
-#define ADDRESS_SHIFT					0
-#define ADDRESS_MASK					(0xff << 0)
-
-/* OCP_CONFIG */
-#define SYS_THRESH_MAX_SHIFT				24
-#define SYS_THRESH_MAX_MASK				(0xf << 24)
-#define MPU_THRESH_MAX_SHIFT				20
-#define MPU_THRESH_MAX_MASK				(0xf << 20)
-#define LL_THRESH_MAX_SHIFT				16
-#define LL_THRESH_MAX_MASK				(0xf << 16)
-
-/* PERFORMANCE_COUNTER_1 */
-#define COUNTER1_SHIFT					0
-#define COUNTER1_MASK					(0xffffffff << 0)
-
-/* PERFORMANCE_COUNTER_2 */
-#define COUNTER2_SHIFT					0
-#define COUNTER2_MASK					(0xffffffff << 0)
-
-/* PERFORMANCE_COUNTER_CONFIG */
-#define CNTR2_MCONNID_EN_SHIFT				31
-#define CNTR2_MCONNID_EN_MASK				(1 << 31)
-#define CNTR2_REGION_EN_SHIFT				30
-#define CNTR2_REGION_EN_MASK				(1 << 30)
-#define CNTR2_CFG_SHIFT					16
-#define CNTR2_CFG_MASK					(0xf << 16)
-#define CNTR1_MCONNID_EN_SHIFT				15
-#define CNTR1_MCONNID_EN_MASK				(1 << 15)
-#define CNTR1_REGION_EN_SHIFT				14
-#define CNTR1_REGION_EN_MASK				(1 << 14)
-#define CNTR1_CFG_SHIFT					0
-#define CNTR1_CFG_MASK					(0xf << 0)
-
-/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
-#define MCONNID2_SHIFT					24
-#define MCONNID2_MASK					(0xff << 24)
-#define REGION_SEL2_SHIFT				16
-#define REGION_SEL2_MASK				(0x3 << 16)
-#define MCONNID1_SHIFT					8
-#define MCONNID1_MASK					(0xff << 8)
-#define REGION_SEL1_SHIFT				0
-#define REGION_SEL1_MASK				(0x3 << 0)
-
-/* PERFORMANCE_COUNTER_TIME */
-#define TOTAL_TIME_SHIFT				0
-#define TOTAL_TIME_MASK					(0xffffffff << 0)
-
-/* DLL_CALIB_CTRL */
-#define ACK_WAIT_SHIFT					16
-#define ACK_WAIT_MASK					(0xf << 16)
-#define DLL_CALIB_INTERVAL_SHIFT			0
-#define DLL_CALIB_INTERVAL_MASK				(0x1ff << 0)
-
-/* END_OF_INTERRUPT */
-#define EOI_SHIFT					0
-#define EOI_MASK					(1 << 0)
-
-/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
-#define DNV_SYS_SHIFT					2
-#define DNV_SYS_MASK					(1 << 2)
-#define TA_SYS_SHIFT					1
-#define TA_SYS_MASK					(1 << 1)
-#define ERR_SYS_SHIFT					0
-#define ERR_SYS_MASK					(1 << 0)
-
-/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
-#define DNV_LL_SHIFT					2
-#define DNV_LL_MASK					(1 << 2)
-#define TA_LL_SHIFT					1
-#define TA_LL_MASK					(1 << 1)
-#define ERR_LL_SHIFT					0
-#define ERR_LL_MASK					(1 << 0)
-
-/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
-#define EN_DNV_SYS_SHIFT				2
-#define EN_DNV_SYS_MASK					(1 << 2)
-#define EN_TA_SYS_SHIFT					1
-#define EN_TA_SYS_MASK					(1 << 1)
-#define EN_ERR_SYS_SHIFT					0
-#define EN_ERR_SYS_MASK					(1 << 0)
-
-/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
-#define EN_DNV_LL_SHIFT					2
-#define EN_DNV_LL_MASK					(1 << 2)
-#define EN_TA_LL_SHIFT					1
-#define EN_TA_LL_MASK					(1 << 1)
-#define EN_ERR_LL_SHIFT					0
-#define EN_ERR_LL_MASK					(1 << 0)
-
-/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
-#define ZQ_CS1EN_SHIFT					31
-#define ZQ_CS1EN_MASK					(1 << 31)
-#define ZQ_CS0EN_SHIFT					30
-#define ZQ_CS0EN_MASK					(1 << 30)
-#define ZQ_DUALCALEN_SHIFT				29
-#define ZQ_DUALCALEN_MASK				(1 << 29)
-#define ZQ_SFEXITEN_SHIFT				28
-#define ZQ_SFEXITEN_MASK				(1 << 28)
-#define ZQ_ZQINIT_MULT_SHIFT				18
-#define ZQ_ZQINIT_MULT_MASK				(0x3 << 18)
-#define ZQ_ZQCL_MULT_SHIFT				16
-#define ZQ_ZQCL_MULT_MASK				(0x3 << 16)
-#define ZQ_REFINTERVAL_SHIFT				0
-#define ZQ_REFINTERVAL_MASK				(0xffff << 0)
-
-/* TEMPERATURE_ALERT_CONFIG */
-#define TA_CS1EN_SHIFT					31
-#define TA_CS1EN_MASK					(1 << 31)
-#define TA_CS0EN_SHIFT					30
-#define TA_CS0EN_MASK					(1 << 30)
-#define TA_SFEXITEN_SHIFT				28
-#define TA_SFEXITEN_MASK				(1 << 28)
-#define TA_DEVWDT_SHIFT					26
-#define TA_DEVWDT_MASK					(0x3 << 26)
-#define TA_DEVCNT_SHIFT					24
-#define TA_DEVCNT_MASK					(0x3 << 24)
-#define TA_REFINTERVAL_SHIFT				0
-#define TA_REFINTERVAL_MASK				(0x3fffff << 0)
-
-/* OCP_ERROR_LOG */
-#define MADDRSPACE_SHIFT				14
-#define MADDRSPACE_MASK					(0x3 << 14)
-#define MBURSTSEQ_SHIFT					11
-#define MBURSTSEQ_MASK					(0x7 << 11)
-#define MCMD_SHIFT					8
-#define MCMD_MASK					(0x7 << 8)
-#define MCONNID_SHIFT					0
-#define MCONNID_MASK					(0xff << 0)
-
-/* DDR_PHY_CTRL_1 - EMIF4D */
-#define DLL_SLAVE_DLY_CTRL_SHIFT_4D			4
-#define DLL_SLAVE_DLY_CTRL_MASK_4D			(0xFF << 4)
-#define READ_LATENCY_SHIFT_4D				0
-#define READ_LATENCY_MASK_4D				(0xf << 0)
-
-/* DDR_PHY_CTRL_1 - EMIF4D5 */
-#define DLL_HALF_DELAY_SHIFT_4D5			21
-#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
-#define READ_LATENCY_SHIFT_4D5				0
-#define READ_LATENCY_MASK_4D5				(0x1f << 0)
-
-/* DDR_PHY_CTRL_1_SHDW */
-#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
-#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
-#define READ_LATENCY_SHDW_SHIFT				0
-#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
-
-#ifndef __ASSEMBLY__
-/*
- * Structure containing shadow of important registers in EMIF
- * The calculation function fills in this structure to be later used for
- * initialisation and DVFS
- */
-struct emif_regs {
-	u32 freq;
-	u32 ref_ctrl_shdw;
-	u32 ref_ctrl_shdw_derated;
-	u32 sdram_tim1_shdw;
-	u32 sdram_tim1_shdw_derated;
-	u32 sdram_tim2_shdw;
-	u32 sdram_tim3_shdw;
-	u32 sdram_tim3_shdw_derated;
-	u32 pwr_mgmt_ctrl_shdw;
-	union {
-		u32 read_idle_ctrl_shdw_normal;
-		u32 dll_calib_ctrl_shdw_normal;
-	};
-	union {
-		u32 read_idle_ctrl_shdw_volt_ramp;
-		u32 dll_calib_ctrl_shdw_volt_ramp;
-	};
-
-	u32 phy_ctrl_1_shdw;
-	u32 ext_phy_ctrl_2_shdw;
-	u32 ext_phy_ctrl_3_shdw;
-	u32 ext_phy_ctrl_4_shdw;
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __EMIF_H */
diff --git a/include/linux/ti_emif.h b/include/linux/ti_emif.h
new file mode 100644
index 0000000..bfe08ba
--- /dev/null
+++ b/include/linux/ti_emif.h
@@ -0,0 +1,589 @@ 
+/*
+ * Defines for the EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __EMIF_H
+#define __EMIF_H
+
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES			6
+
+/* State of the core voltage */
+#define DDR_VOLTAGE_STABLE				0
+#define DDR_VOLTAGE_RAMPING				1
+
+/* Defines for timing De-rating */
+#define EMIF_NORMAL_TIMINGS				0
+#define EMIF_DERATED_TIMINGS				1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_READ_IDLE_LEN_VAL				5
+
+/*
+ * forced read idle interval to be used when voltage
+ * is changed as part of DVFS/DPS - 1ms
+ */
+#define READ_IDLE_INTERVAL_DVFS				(1*1000000)
+
+/*
+ * Forced read idle interval to be used when voltage is stable
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL			(50*1000000)
+
+/* DLL calibration interval when voltage is NOT stable - 1us */
+#define DLL_CALIB_INTERVAL_DVFS				(1*1000000)
+
+#define DLL_CALIB_ACK_WAIT_VAL				5
+
+/* Interval between ZQCS commands - hw team recommended value */
+#define EMIF_ZQCS_INTERVAL_US				(50*1000)
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define ZQ_SFEXITEN_ENABLE				1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ */
+#define	ZQ_DUALCALEN_DISABLE				0
+#define	ZQ_DUALCALEN_ENABLE				1
+
+#define T_ZQCS_DEFAULT_NS				90
+#define T_ZQCL_DEFAULT_NS				360
+#define T_ZQINIT_DEFAULT_NS				1000
+
+/* DPD_EN */
+#define DPD_DISABLE					0
+#define DPD_ENABLE					1
+
+/*
+ * Default values for the low-power entry to be used if not provided by user.
+ * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
+ * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
+ */
+#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE		2048
+#define EMIF_LP_MODE_TIMEOUT_POWER			512
+#define EMIF_LP_MODE_FREQ_THRESHOLD			400000000
+
+/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY		0x049FF000
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY	0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY	0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
+
+/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
+#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
+
+/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
+#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS		360
+
+#define EMIF_T_CSTA					3
+#define EMIF_T_PDLL_UL					128
+
+/* External PHY control registers magic values */
+#define EMIF_EXT_PHY_CTRL_1_VAL				0x04020080
+#define EMIF_EXT_PHY_CTRL_5_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_6_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_7_VAL				0x00001004
+#define EMIF_EXT_PHY_CTRL_8_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_9_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_10_VAL			0x00001004
+#define EMIF_EXT_PHY_CTRL_11_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_12_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_13_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_14_VAL			0x80080080
+#define EMIF_EXT_PHY_CTRL_15_VAL			0x00800800
+#define EMIF_EXT_PHY_CTRL_16_VAL			0x08102040
+#define EMIF_EXT_PHY_CTRL_17_VAL			0x00000001
+#define EMIF_EXT_PHY_CTRL_18_VAL			0x540A8150
+#define EMIF_EXT_PHY_CTRL_19_VAL			0xA81502A0
+#define EMIF_EXT_PHY_CTRL_20_VAL			0x002A0540
+#define EMIF_EXT_PHY_CTRL_21_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_22_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_23_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_24_VAL			0x00000077
+
+#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS	1200
+
+/* Registers offset */
+#define EMIF_MODULE_ID_AND_REVISION			0x0000
+#define EMIF_STATUS					0x0004
+#define EMIF_SDRAM_CONFIG				0x0008
+#define EMIF_SDRAM_CONFIG_2				0x000c
+#define EMIF_SDRAM_REFRESH_CONTROL			0x0010
+#define EMIF_SDRAM_REFRESH_CTRL_SHDW			0x0014
+#define EMIF_SDRAM_TIMING_1				0x0018
+#define EMIF_SDRAM_TIMING_1_SHDW			0x001c
+#define EMIF_SDRAM_TIMING_2				0x0020
+#define EMIF_SDRAM_TIMING_2_SHDW			0x0024
+#define EMIF_SDRAM_TIMING_3				0x0028
+#define EMIF_SDRAM_TIMING_3_SHDW			0x002c
+#define EMIF_LPDDR2_NVM_TIMING				0x0030
+#define EMIF_LPDDR2_NVM_TIMING_SHDW			0x0034
+#define EMIF_POWER_MANAGEMENT_CONTROL			0x0038
+#define EMIF_POWER_MANAGEMENT_CTRL_SHDW			0x003c
+#define EMIF_LPDDR2_MODE_REG_DATA			0x0040
+#define EMIF_LPDDR2_MODE_REG_CONFIG			0x0050
+#define EMIF_OCP_CONFIG					0x0054
+#define EMIF_OCP_CONFIG_VALUE_1				0x0058
+#define EMIF_OCP_CONFIG_VALUE_2				0x005c
+#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL		0x0060
+#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT		0x0064
+#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT	0x0068
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1	0x006c
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2	0x0070
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3	0x0074
+#define EMIF_PERFORMANCE_COUNTER_1			0x0080
+#define EMIF_PERFORMANCE_COUNTER_2			0x0084
+#define EMIF_PERFORMANCE_COUNTER_CONFIG			0x0088
+#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT	0x008c
+#define EMIF_PERFORMANCE_COUNTER_TIME			0x0090
+#define EMIF_MISC_REG					0x0094
+#define EMIF_DLL_CALIB_CTRL				0x0098
+#define EMIF_DLL_CALIB_CTRL_SHDW			0x009c
+#define EMIF_END_OF_INTERRUPT				0x00a0
+#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS		0x00a4
+#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS		0x00a8
+#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS		0x00ac
+#define EMIF_LL_OCP_INTERRUPT_STATUS			0x00b0
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET		0x00b4
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET		0x00b8
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR		0x00bc
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR		0x00c0
+#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG	0x00c8
+#define EMIF_TEMPERATURE_ALERT_CONFIG			0x00cc
+#define EMIF_OCP_ERROR_LOG				0x00d0
+#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW		0x00d4
+#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL		0x00d8
+#define EMIF_READ_WRITE_LEVELING_CONTROL		0x00dc
+#define EMIF_DDR_PHY_CTRL_1				0x00e4
+#define EMIF_DDR_PHY_CTRL_1_SHDW			0x00e8
+#define EMIF_DDR_PHY_CTRL_2				0x00ec
+#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING	0x0100
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
+#define EMIF_READ_WRITE_EXECUTION_THRESHOLD		0x0120
+#define EMIF_COS_CONFIG					0x0124
+#define EMIF_PHY_STATUS_1				0x0140
+#define EMIF_PHY_STATUS_2				0x0144
+#define EMIF_PHY_STATUS_3				0x0148
+#define EMIF_PHY_STATUS_4				0x014c
+#define EMIF_PHY_STATUS_5				0x0150
+#define EMIF_PHY_STATUS_6				0x0154
+#define EMIF_PHY_STATUS_7				0x0158
+#define EMIF_PHY_STATUS_8				0x015c
+#define EMIF_PHY_STATUS_9				0x0160
+#define EMIF_PHY_STATUS_10				0x0164
+#define EMIF_PHY_STATUS_11				0x0168
+#define EMIF_PHY_STATUS_12				0x016c
+#define EMIF_PHY_STATUS_13				0x0170
+#define EMIF_PHY_STATUS_14				0x0174
+#define EMIF_PHY_STATUS_15				0x0178
+#define EMIF_PHY_STATUS_16				0x017c
+#define EMIF_PHY_STATUS_17				0x0180
+#define EMIF_PHY_STATUS_18				0x0184
+#define EMIF_PHY_STATUS_19				0x0188
+#define EMIF_PHY_STATUS_20				0x018c
+#define EMIF_PHY_STATUS_21				0x0190
+#define EMIF_EXT_PHY_CTRL_1				0x0200
+#define EMIF_EXT_PHY_CTRL_1_SHDW			0x0204
+#define EMIF_EXT_PHY_CTRL_2				0x0208
+#define EMIF_EXT_PHY_CTRL_2_SHDW			0x020c
+#define EMIF_EXT_PHY_CTRL_3				0x0210
+#define EMIF_EXT_PHY_CTRL_3_SHDW			0x0214
+#define EMIF_EXT_PHY_CTRL_4				0x0218
+#define EMIF_EXT_PHY_CTRL_4_SHDW			0x021c
+#define EMIF_EXT_PHY_CTRL_5				0x0220
+#define EMIF_EXT_PHY_CTRL_5_SHDW			0x0224
+#define EMIF_EXT_PHY_CTRL_6				0x0228
+#define EMIF_EXT_PHY_CTRL_6_SHDW			0x022c
+#define EMIF_EXT_PHY_CTRL_7				0x0230
+#define EMIF_EXT_PHY_CTRL_7_SHDW			0x0234
+#define EMIF_EXT_PHY_CTRL_8				0x0238
+#define EMIF_EXT_PHY_CTRL_8_SHDW			0x023c
+#define EMIF_EXT_PHY_CTRL_9				0x0240
+#define EMIF_EXT_PHY_CTRL_9_SHDW			0x0244
+#define EMIF_EXT_PHY_CTRL_10				0x0248
+#define EMIF_EXT_PHY_CTRL_10_SHDW			0x024c
+#define EMIF_EXT_PHY_CTRL_11				0x0250
+#define EMIF_EXT_PHY_CTRL_11_SHDW			0x0254
+#define EMIF_EXT_PHY_CTRL_12				0x0258
+#define EMIF_EXT_PHY_CTRL_12_SHDW			0x025c
+#define EMIF_EXT_PHY_CTRL_13				0x0260
+#define EMIF_EXT_PHY_CTRL_13_SHDW			0x0264
+#define EMIF_EXT_PHY_CTRL_14				0x0268
+#define EMIF_EXT_PHY_CTRL_14_SHDW			0x026c
+#define EMIF_EXT_PHY_CTRL_15				0x0270
+#define EMIF_EXT_PHY_CTRL_15_SHDW			0x0274
+#define EMIF_EXT_PHY_CTRL_16				0x0278
+#define EMIF_EXT_PHY_CTRL_16_SHDW			0x027c
+#define EMIF_EXT_PHY_CTRL_17				0x0280
+#define EMIF_EXT_PHY_CTRL_17_SHDW			0x0284
+#define EMIF_EXT_PHY_CTRL_18				0x0288
+#define EMIF_EXT_PHY_CTRL_18_SHDW			0x028c
+#define EMIF_EXT_PHY_CTRL_19				0x0290
+#define EMIF_EXT_PHY_CTRL_19_SHDW			0x0294
+#define EMIF_EXT_PHY_CTRL_20				0x0298
+#define EMIF_EXT_PHY_CTRL_20_SHDW			0x029c
+#define EMIF_EXT_PHY_CTRL_21				0x02a0
+#define EMIF_EXT_PHY_CTRL_21_SHDW			0x02a4
+#define EMIF_EXT_PHY_CTRL_22				0x02a8
+#define EMIF_EXT_PHY_CTRL_22_SHDW			0x02ac
+#define EMIF_EXT_PHY_CTRL_23				0x02b0
+#define EMIF_EXT_PHY_CTRL_23_SHDW			0x02b4
+#define EMIF_EXT_PHY_CTRL_24				0x02b8
+#define EMIF_EXT_PHY_CTRL_24_SHDW			0x02bc
+#define EMIF_EXT_PHY_CTRL_25				0x02c0
+#define EMIF_EXT_PHY_CTRL_25_SHDW			0x02c4
+#define EMIF_EXT_PHY_CTRL_26				0x02c8
+#define EMIF_EXT_PHY_CTRL_26_SHDW			0x02cc
+#define EMIF_EXT_PHY_CTRL_27				0x02d0
+#define EMIF_EXT_PHY_CTRL_27_SHDW			0x02d4
+#define EMIF_EXT_PHY_CTRL_28				0x02d8
+#define EMIF_EXT_PHY_CTRL_28_SHDW			0x02dc
+#define EMIF_EXT_PHY_CTRL_29				0x02e0
+#define EMIF_EXT_PHY_CTRL_29_SHDW			0x02e4
+#define EMIF_EXT_PHY_CTRL_30				0x02e8
+#define EMIF_EXT_PHY_CTRL_30_SHDW			0x02ec
+
+/* Registers shifts and masks */
+
+/* EMIF_MODULE_ID_AND_REVISION */
+#define SCHEME_SHIFT					30
+#define SCHEME_MASK					(0x3 << 30)
+#define MODULE_ID_SHIFT					16
+#define MODULE_ID_MASK					(0xfff << 16)
+#define RTL_VERSION_SHIFT				11
+#define RTL_VERSION_MASK				(0x1f << 11)
+#define MAJOR_REVISION_SHIFT				8
+#define MAJOR_REVISION_MASK				(0x7 << 8)
+#define MINOR_REVISION_SHIFT				0
+#define MINOR_REVISION_MASK				(0x3f << 0)
+
+/* STATUS */
+#define BE_SHIFT					31
+#define BE_MASK						(1 << 31)
+#define DUAL_CLK_MODE_SHIFT				30
+#define DUAL_CLK_MODE_MASK				(1 << 30)
+#define FAST_INIT_SHIFT					29
+#define FAST_INIT_MASK					(1 << 29)
+#define RDLVLGATETO_SHIFT				6
+#define RDLVLGATETO_MASK				(1 << 6)
+#define RDLVLTO_SHIFT					5
+#define RDLVLTO_MASK					(1 << 5)
+#define WRLVLTO_SHIFT					4
+#define WRLVLTO_MASK					(1 << 4)
+#define PHY_DLL_READY_SHIFT				2
+#define PHY_DLL_READY_MASK				(1 << 2)
+
+/* SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT				29
+#define SDRAM_TYPE_MASK					(0x7 << 29)
+#define IBANK_POS_SHIFT					27
+#define IBANK_POS_MASK					(0x3 << 27)
+#define DDR_TERM_SHIFT					24
+#define DDR_TERM_MASK					(0x7 << 24)
+#define DDR2_DDQS_SHIFT					23
+#define DDR2_DDQS_MASK					(1 << 23)
+#define DYN_ODT_SHIFT					21
+#define DYN_ODT_MASK					(0x3 << 21)
+#define DDR_DISABLE_DLL_SHIFT				20
+#define DDR_DISABLE_DLL_MASK				(1 << 20)
+#define SDRAM_DRIVE_SHIFT				18
+#define SDRAM_DRIVE_MASK				(0x3 << 18)
+#define CWL_SHIFT					16
+#define CWL_MASK					(0x3 << 16)
+#define NARROW_MODE_SHIFT				14
+#define NARROW_MODE_MASK				(0x3 << 14)
+#define CL_SHIFT					10
+#define CL_MASK						(0xf << 10)
+#define ROWSIZE_SHIFT					7
+#define ROWSIZE_MASK					(0x7 << 7)
+#define IBANK_SHIFT					4
+#define IBANK_MASK					(0x7 << 4)
+#define EBANK_SHIFT					3
+#define EBANK_MASK					(1 << 3)
+#define PAGESIZE_SHIFT					0
+#define PAGESIZE_MASK					(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define CS1NVMEN_SHIFT					30
+#define CS1NVMEN_MASK					(1 << 30)
+#define EBANK_POS_SHIFT					27
+#define EBANK_POS_MASK					(1 << 27)
+#define RDBNUM_SHIFT					4
+#define RDBNUM_MASK					(0x3 << 4)
+#define RDBSIZE_SHIFT					0
+#define RDBSIZE_MASK					(0x7 << 0)
+
+/* SDRAM_REFRESH_CONTROL */
+#define INITREF_DIS_SHIFT				31
+#define INITREF_DIS_MASK				(1 << 31)
+#define SRT_SHIFT					29
+#define SRT_MASK					(1 << 29)
+#define ASR_SHIFT					28
+#define ASR_MASK					(1 << 28)
+#define PASR_SHIFT					24
+#define PASR_MASK					(0x7 << 24)
+#define REFRESH_RATE_SHIFT				0
+#define REFRESH_RATE_MASK				(0xffff << 0)
+
+/* SDRAM_TIMING_1 */
+#define T_RTW_SHIFT					29
+#define T_RTW_MASK					(0x7 << 29)
+#define T_RP_SHIFT					25
+#define T_RP_MASK					(0xf << 25)
+#define T_RCD_SHIFT					21
+#define T_RCD_MASK					(0xf << 21)
+#define T_WR_SHIFT					17
+#define T_WR_MASK					(0xf << 17)
+#define T_RAS_SHIFT					12
+#define T_RAS_MASK					(0x1f << 12)
+#define T_RC_SHIFT					6
+#define T_RC_MASK					(0x3f << 6)
+#define T_RRD_SHIFT					3
+#define T_RRD_MASK					(0x7 << 3)
+#define T_WTR_SHIFT					0
+#define T_WTR_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_2 */
+#define T_XP_SHIFT					28
+#define T_XP_MASK					(0x7 << 28)
+#define T_ODT_SHIFT					25
+#define T_ODT_MASK					(0x7 << 25)
+#define T_XSNR_SHIFT					16
+#define T_XSNR_MASK					(0x1ff << 16)
+#define T_XSRD_SHIFT					6
+#define T_XSRD_MASK					(0x3ff << 6)
+#define T_RTP_SHIFT					3
+#define T_RTP_MASK					(0x7 << 3)
+#define T_CKE_SHIFT					0
+#define T_CKE_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_3 */
+#define T_PDLL_UL_SHIFT					28
+#define T_PDLL_UL_MASK					(0xf << 28)
+#define T_CSTA_SHIFT					24
+#define T_CSTA_MASK					(0xf << 24)
+#define T_CKESR_SHIFT					21
+#define T_CKESR_MASK					(0x7 << 21)
+#define ZQ_ZQCS_SHIFT					15
+#define ZQ_ZQCS_MASK					(0x3f << 15)
+#define T_TDQSCKMAX_SHIFT				13
+#define T_TDQSCKMAX_MASK				(0x3 << 13)
+#define T_RFC_SHIFT					4
+#define T_RFC_MASK					(0x1ff << 4)
+#define T_RAS_MAX_SHIFT					0
+#define T_RAS_MAX_MASK					(0xf << 0)
+
+/* POWER_MANAGEMENT_CONTROL */
+#define PD_TIM_SHIFT					12
+#define PD_TIM_MASK					(0xf << 12)
+#define DPD_EN_SHIFT					11
+#define DPD_EN_MASK					(1 << 11)
+#define LP_MODE_SHIFT					8
+#define LP_MODE_MASK					(0x7 << 8)
+#define SR_TIM_SHIFT					4
+#define SR_TIM_MASK					(0xf << 4)
+#define CS_TIM_SHIFT					0
+#define CS_TIM_MASK					(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define VALUE_0_SHIFT					0
+#define VALUE_0_MASK					(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CONFIG */
+#define CS_SHIFT					31
+#define CS_MASK						(1 << 31)
+#define REFRESH_EN_SHIFT				30
+#define REFRESH_EN_MASK					(1 << 30)
+#define ADDRESS_SHIFT					0
+#define ADDRESS_MASK					(0xff << 0)
+
+/* OCP_CONFIG */
+#define SYS_THRESH_MAX_SHIFT				24
+#define SYS_THRESH_MAX_MASK				(0xf << 24)
+#define MPU_THRESH_MAX_SHIFT				20
+#define MPU_THRESH_MAX_MASK				(0xf << 20)
+#define LL_THRESH_MAX_SHIFT				16
+#define LL_THRESH_MAX_MASK				(0xf << 16)
+
+/* PERFORMANCE_COUNTER_1 */
+#define COUNTER1_SHIFT					0
+#define COUNTER1_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_2 */
+#define COUNTER2_SHIFT					0
+#define COUNTER2_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_CONFIG */
+#define CNTR2_MCONNID_EN_SHIFT				31
+#define CNTR2_MCONNID_EN_MASK				(1 << 31)
+#define CNTR2_REGION_EN_SHIFT				30
+#define CNTR2_REGION_EN_MASK				(1 << 30)
+#define CNTR2_CFG_SHIFT					16
+#define CNTR2_CFG_MASK					(0xf << 16)
+#define CNTR1_MCONNID_EN_SHIFT				15
+#define CNTR1_MCONNID_EN_MASK				(1 << 15)
+#define CNTR1_REGION_EN_SHIFT				14
+#define CNTR1_REGION_EN_MASK				(1 << 14)
+#define CNTR1_CFG_SHIFT					0
+#define CNTR1_CFG_MASK					(0xf << 0)
+
+/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
+#define MCONNID2_SHIFT					24
+#define MCONNID2_MASK					(0xff << 24)
+#define REGION_SEL2_SHIFT				16
+#define REGION_SEL2_MASK				(0x3 << 16)
+#define MCONNID1_SHIFT					8
+#define MCONNID1_MASK					(0xff << 8)
+#define REGION_SEL1_SHIFT				0
+#define REGION_SEL1_MASK				(0x3 << 0)
+
+/* PERFORMANCE_COUNTER_TIME */
+#define TOTAL_TIME_SHIFT				0
+#define TOTAL_TIME_MASK					(0xffffffff << 0)
+
+/* DLL_CALIB_CTRL */
+#define ACK_WAIT_SHIFT					16
+#define ACK_WAIT_MASK					(0xf << 16)
+#define DLL_CALIB_INTERVAL_SHIFT			0
+#define DLL_CALIB_INTERVAL_MASK				(0x1ff << 0)
+
+/* END_OF_INTERRUPT */
+#define EOI_SHIFT					0
+#define EOI_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_SYS_SHIFT					2
+#define DNV_SYS_MASK					(1 << 2)
+#define TA_SYS_SHIFT					1
+#define TA_SYS_MASK					(1 << 1)
+#define ERR_SYS_SHIFT					0
+#define ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_LL_SHIFT					2
+#define DNV_LL_MASK					(1 << 2)
+#define TA_LL_SHIFT					1
+#define TA_LL_MASK					(1 << 1)
+#define ERR_LL_SHIFT					0
+#define ERR_LL_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_SYS_SHIFT				2
+#define EN_DNV_SYS_MASK					(1 << 2)
+#define EN_TA_SYS_SHIFT					1
+#define EN_TA_SYS_MASK					(1 << 1)
+#define EN_ERR_SYS_SHIFT					0
+#define EN_ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_LL_SHIFT					2
+#define EN_DNV_LL_MASK					(1 << 2)
+#define EN_TA_LL_SHIFT					1
+#define EN_TA_LL_MASK					(1 << 1)
+#define EN_ERR_LL_SHIFT					0
+#define EN_ERR_LL_MASK					(1 << 0)
+
+/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
+#define ZQ_CS1EN_SHIFT					31
+#define ZQ_CS1EN_MASK					(1 << 31)
+#define ZQ_CS0EN_SHIFT					30
+#define ZQ_CS0EN_MASK					(1 << 30)
+#define ZQ_DUALCALEN_SHIFT				29
+#define ZQ_DUALCALEN_MASK				(1 << 29)
+#define ZQ_SFEXITEN_SHIFT				28
+#define ZQ_SFEXITEN_MASK				(1 << 28)
+#define ZQ_ZQINIT_MULT_SHIFT				18
+#define ZQ_ZQINIT_MULT_MASK				(0x3 << 18)
+#define ZQ_ZQCL_MULT_SHIFT				16
+#define ZQ_ZQCL_MULT_MASK				(0x3 << 16)
+#define ZQ_REFINTERVAL_SHIFT				0
+#define ZQ_REFINTERVAL_MASK				(0xffff << 0)
+
+/* TEMPERATURE_ALERT_CONFIG */
+#define TA_CS1EN_SHIFT					31
+#define TA_CS1EN_MASK					(1 << 31)
+#define TA_CS0EN_SHIFT					30
+#define TA_CS0EN_MASK					(1 << 30)
+#define TA_SFEXITEN_SHIFT				28
+#define TA_SFEXITEN_MASK				(1 << 28)
+#define TA_DEVWDT_SHIFT					26
+#define TA_DEVWDT_MASK					(0x3 << 26)
+#define TA_DEVCNT_SHIFT					24
+#define TA_DEVCNT_MASK					(0x3 << 24)
+#define TA_REFINTERVAL_SHIFT				0
+#define TA_REFINTERVAL_MASK				(0x3fffff << 0)
+
+/* OCP_ERROR_LOG */
+#define MADDRSPACE_SHIFT				14
+#define MADDRSPACE_MASK					(0x3 << 14)
+#define MBURSTSEQ_SHIFT					11
+#define MBURSTSEQ_MASK					(0x7 << 11)
+#define MCMD_SHIFT					8
+#define MCMD_MASK					(0x7 << 8)
+#define MCONNID_SHIFT					0
+#define MCONNID_MASK					(0xff << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D */
+#define DLL_SLAVE_DLY_CTRL_SHIFT_4D			4
+#define DLL_SLAVE_DLY_CTRL_MASK_4D			(0xFF << 4)
+#define READ_LATENCY_SHIFT_4D				0
+#define READ_LATENCY_MASK_4D				(0xf << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D5 */
+#define DLL_HALF_DELAY_SHIFT_4D5			21
+#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
+#define READ_LATENCY_SHIFT_4D5				0
+#define READ_LATENCY_MASK_4D5				(0x1f << 0)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
+#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
+#define READ_LATENCY_SHDW_SHIFT				0
+#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialisation and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 ref_ctrl_shdw;
+	u32 ref_ctrl_shdw_derated;
+	u32 sdram_tim1_shdw;
+	u32 sdram_tim1_shdw_derated;
+	u32 sdram_tim2_shdw;
+	u32 sdram_tim3_shdw;
+	u32 sdram_tim3_shdw_derated;
+	u32 pwr_mgmt_ctrl_shdw;
+	union {
+		u32 read_idle_ctrl_shdw_normal;
+		u32 dll_calib_ctrl_shdw_normal;
+	};
+	union {
+		u32 read_idle_ctrl_shdw_volt_ramp;
+		u32 dll_calib_ctrl_shdw_volt_ramp;
+	};
+
+	u32 phy_ctrl_1_shdw;
+	u32 ext_phy_ctrl_2_shdw;
+	u32 ext_phy_ctrl_3_shdw;
+	u32 ext_phy_ctrl_4_shdw;
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __EMIF_H */