diff mbox

[v2,1/1] OMAP4: DSS: Add panel for Blaze Tablet boards

Message ID 1360338220-12753-2-git-send-email-ruslan.bilovol@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ruslan Bilovol Feb. 8, 2013, 3:43 p.m. UTC
From: Tomi Valkeinen <tomi.valkeinen@ti.com>

TC358765 is DSI-to-LVDS transmitter from Toshiba, used in
OMAP44XX Blaze Tablet and Blaze Tablet2 boards.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sergiy Kibrik <sergiy.kibrik@globallogic.com>
Signed-off-by: Volodymyr Riazantsev <v.riazantsev@ti.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
---
 drivers/video/omap2/displays/Kconfig          |   15 +
 drivers/video/omap2/displays/Makefile         |    1 +
 drivers/video/omap2/displays/panel-tc358765.c | 1000 +++++++++++++++++++++++++
 drivers/video/omap2/displays/panel-tc358765.h |  170 +++++
 include/video/omap-panel-tc358765.h           |   53 ++
 5 files changed, 1239 insertions(+)
 create mode 100644 drivers/video/omap2/displays/panel-tc358765.c
 create mode 100644 drivers/video/omap2/displays/panel-tc358765.h
 create mode 100644 include/video/omap-panel-tc358765.h

Comments

Andi Shyti Feb. 10, 2013, 11:51 p.m. UTC | #1
Hi Ruslan,

> TC358765 is DSI-to-LVDS transmitter from Toshiba, used in
> OMAP44XX Blaze Tablet and Blaze Tablet2 boards.

I think it's fine, just some nitpicks and checkpatch warnings

> +struct {
> +	struct device *dev;
> +	struct dentry *dir;
> +} tc358765_debug;

Should this be static?

> +struct tc358765_reg {
> +	const char *name;
> +	u16 reg;
> +	u8 perm:2;
> +} tc358765_regs[] = {

Should this be static as well?

> +	{ "D1S_ZERO", D1S_ZERO, A_RW },
> +	{ "D2S_ZERO", D2S_ZERO, A_RW  },
> +	{ "D3S_ZERO", D3S_ZERO, A_RW },
> +	{ "PPI_CLRFLG", PPI_CLRFLG, A_RW },
> +	{ "PPI_CLRSIPO", PPI_CLRSIPO, A_RW },
> +	{ "PPI_HSTimeout", PPI_HSTimeout, A_RW },

WARNING: Avoid CamelCase: <PPI_HSTimeout>
#136: FILE: video/omap2/displays/panel-tc358765.c:136:
+	{ "PPI_HSTimeout", PPI_HSTimeout, A_RW },

> +	{ "PPI_HSTimeoutEnable", PPI_HSTimeoutEnable, A_RW },

WARNING: Avoid CamelCase: <PPI_HSTimeoutEnable>
#137: FILE: video/omap2/displays/panel-tc358765.c:137:
+	{ "PPI_HSTimeoutEnable", PPI_HSTimeoutEnable, A_RW },


> +static int tc358765_read_block(u16 reg, u8 *data, int len)
> +{
> +	unsigned char wb[2];
> +	struct i2c_msg msg[2];
> +	int r;
> +	mutex_lock(&tc358765_i2c->xfer_lock);
> +	wb[0] = (reg & 0xff00) >> 8;
> +	wb[1] = reg & 0xff;
> +	msg[0].addr = tc358765_i2c->client->addr;
> +	msg[0].len = 2;
> +	msg[0].flags = 0;
> +	msg[0].buf = wb;
> +	msg[1].addr = tc358765_i2c->client->addr;
> +	msg[1].flags = I2C_M_RD;
> +	msg[1].len = len;
> +	msg[1].buf = data;
> +
> +	r = i2c_transfer(tc358765_i2c->client->adapter, msg, ARRAY_SIZE(msg));
> +	mutex_unlock(&tc358765_i2c->xfer_lock);
> +
> +	if (r == ARRAY_SIZE(msg))
> +		return len;
> +
> +	return r;

If you like, here you could do

	return (r == ARRAY_SIZE(msg)) ? len : r;

Usually I like more this notation because keeps the code more
compact and immediate to read, but you don't have to

> +	mutex_lock(&tc358765_i2c->xfer_lock);
> +	ret = i2c_transfer(tc358765_i2c->client->adapter, &msg, 1);
> +	mutex_unlock(&tc358765_i2c->xfer_lock);
> +
> +	if (ret != 1)
> +		return ret;
> +	return 0;

Also here you could do

	return (ret != 1) ? ret : 0;

But this is more taste :)

> +static ssize_t tc358765_seq_write(struct file *filp, const char __user *ubuf,
> +						size_t size, loff_t *ppos)
> +{
> +	struct device *dev = tc358765_debug.dev;
> +	unsigned i, reg_count;
> +	u32 value = 0;
> +	int error = 0;
> +	/* kids, don't use register names that long */

I won't, promised, but please, drop this comment :)

> +	char name[30];
> +	char buf[50];
> +
> +	if (size >= sizeof(buf))
> +		size = sizeof(buf);

what's the point of this?

> +static void tc358765_uninitialize_debugfs(void)
> +{
> +	if (tc358765_debug.dir)
> +		debugfs_remove_recursive(tc358765_debug.dir);

WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
#435: FILE: video/omap2/displays/panel-tc358765.c:435:
+	if (tc358765_debug.dir)
+		debugfs_remove_recursive(tc358765_debug.dir);


> +static struct tc358765_board_data *get_board_data(struct omap_dss_device
> +								*dssdev)
> +{
> +	return (struct tc358765_board_data *)dssdev->data;

You shouldn't need for this cast, does it complain?

> +}
> +
> +static void tc358765_get_timings(struct omap_dss_device *dssdev,
> +		struct omap_video_timings *timings)
> +{
> +	*timings = dssdev->panel.timings;
> +}
> +
> +static void tc358765_set_timings(struct omap_dss_device *dssdev,
> +		struct omap_video_timings *timings)
> +{
> +	dev_info(&dssdev->dev, "set_timings() not implemented\n");

... then drop the function :)

> +	if ((pins[2] & 1) || (pins[3] & 1)) {
> +		lanes |= (1 << 1);
> +		ret |= tc358765_write_register(dssdev, PPI_D0S_CLRSIPOCOUNT,
> +							board_data->clrsipo);
> +	}
> +	if ((pins[4] & 1) || (pins[5] & 1)) {
> +		lanes |= (1 << 2);
> +		ret |= tc358765_write_register(dssdev, PPI_D1S_CLRSIPOCOUNT,
> +							board_data->clrsipo);
> +	}
> +	if ((pins[6] & 1) || (pins[7] & 1)) {
> +		lanes |= (1 << 3);
> +		ret |= tc358765_write_register(dssdev, PPI_D2S_CLRSIPOCOUNT,
> +							board_data->clrsipo);
> +	}
> +	if ((pins[8] & 1) || (pins[9] & 1)) {
> +		lanes |= (1 << 4);
> +		ret |= tc358765_write_register(dssdev, PPI_D3S_CLRSIPOCOUNT,
> +							board_data->clrsipo);
> +	}

Can't this be done in one single multiwrighting command since
this registers are consecutive?

You build once the array to write and you send it at once.

Moreover it would be nice to have a name for all those nombers

> +	ret |= tc358765_write_register(dssdev, HTIM1,
> +		(tc358765_timings.hbp << 16) | tc358765_timings.hsw);
> +	ret |= tc358765_write_register(dssdev, HTIM2,
> +		((tc358765_timings.hfp << 16) | tc358765_timings.x_res));
> +	ret |= tc358765_write_register(dssdev, VTIM1,
> +		((tc358765_timings.vbp << 16) |	tc358765_timings.vsw));
> +	ret |= tc358765_write_register(dssdev, VTIM2,
> +		((tc358765_timings.vfp << 16) |	tc358765_timings.y_res));

also this and all the other cases I haven't checked

> +static int tc358765_enable(struct omap_dss_device *dssdev)
> +{
> +	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
> +	int r = 0;

this initialisation is useless

> +	if (r) {
> +		dev_dbg(&dssdev->dev, "enable failed\n");

Here you could choose a different print level, I would have used
dev_err instead.

> +static int tc358765_i2c_probe(struct i2c_client *client,
> +				   const struct i2c_device_id *id)
> +{
> +	tc358765_i2c = devm_kzalloc(&client->dev, sizeof(*tc358765_i2c), GFP_KERNEL);

WARNING: line over 80 characters
#927: FILE: video/omap2/displays/panel-tc358765.c:927:
+	tc358765_i2c = devm_kzalloc(&client->dev, sizeof(*tc358765_i2c), GFP_KERNEL);


> +	/* store i2c_client pointer on private data structure */
> +	tc358765_i2c->client = client;
> +
> +	/* store private data structure pointer on i2c_client structure */
> +	i2c_set_clientdata(client, tc358765_i2c);
> +
> +	/* init mutex */
> +	mutex_init(&tc358765_i2c->xfer_lock);
> +	dev_err(&client->dev, "D2L i2c initialized\n");

while here dev_dbg (or dev_info) are better.

> +static int __init tc358765_init(void)
> +{
> +	int r;
> +	tc358765_i2c = NULL;
> +	r = i2c_add_driver(&tc358765_i2c_driver);
> +	if (r < 0) {
> +		printk(KERN_WARNING "d2l i2c driver registration failed\n");

WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ...  then pr_warn(...  to printk(KERN_WARNING ...
#981: FILE: video/omap2/displays/panel-tc358765.c:981:
+		printk(KERN_WARNING "d2l i2c driver registration failed\n");


Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ruslan Bilovol Feb. 13, 2013, 7:23 p.m. UTC | #2
Hi Andi,

Thanks for your review,

On Mon, Feb 11, 2013 at 1:51 AM, Andi Shyti <andi@etezian.org> wrote:
> Hi Ruslan,
>
>> TC358765 is DSI-to-LVDS transmitter from Toshiba, used in
>> OMAP44XX Blaze Tablet and Blaze Tablet2 boards.
>
> I think it's fine, just some nitpicks and checkpatch warnings
>
>> +struct {
>> +     struct device *dev;
>> +     struct dentry *dir;
>> +} tc358765_debug;
>
> Should this be static?

Agree.

>
>> +struct tc358765_reg {
>> +     const char *name;
>> +     u16 reg;
>> +     u8 perm:2;
>> +} tc358765_regs[] = {
>
> Should this be static as well?

Agree.

>
>> +     { "D1S_ZERO", D1S_ZERO, A_RW },
>> +     { "D2S_ZERO", D2S_ZERO, A_RW  },
>> +     { "D3S_ZERO", D3S_ZERO, A_RW },
>> +     { "PPI_CLRFLG", PPI_CLRFLG, A_RW },
>> +     { "PPI_CLRSIPO", PPI_CLRSIPO, A_RW },
>> +     { "PPI_HSTimeout", PPI_HSTimeout, A_RW },
>
> WARNING: Avoid CamelCase: <PPI_HSTimeout>
> #136: FILE: video/omap2/displays/panel-tc358765.c:136:
> +       { "PPI_HSTimeout", PPI_HSTimeout, A_RW },
>
>> +     { "PPI_HSTimeoutEnable", PPI_HSTimeoutEnable, A_RW },
>
> WARNING: Avoid CamelCase: <PPI_HSTimeoutEnable>
> #137: FILE: video/omap2/displays/panel-tc358765.c:137:
> +       { "PPI_HSTimeoutEnable", PPI_HSTimeoutEnable, A_RW },

Hmm... I though these registers had such naming in the documentation,
however, after looking into it I found the names are in upper case there
so this will be fixed.

>
>
>> +static int tc358765_read_block(u16 reg, u8 *data, int len)
>> +{
>> +     unsigned char wb[2];
>> +     struct i2c_msg msg[2];
>> +     int r;
>> +     mutex_lock(&tc358765_i2c->xfer_lock);
>> +     wb[0] = (reg & 0xff00) >> 8;
>> +     wb[1] = reg & 0xff;
>> +     msg[0].addr = tc358765_i2c->client->addr;
>> +     msg[0].len = 2;
>> +     msg[0].flags = 0;
>> +     msg[0].buf = wb;
>> +     msg[1].addr = tc358765_i2c->client->addr;
>> +     msg[1].flags = I2C_M_RD;
>> +     msg[1].len = len;
>> +     msg[1].buf = data;
>> +
>> +     r = i2c_transfer(tc358765_i2c->client->adapter, msg, ARRAY_SIZE(msg));
>> +     mutex_unlock(&tc358765_i2c->xfer_lock);
>> +
>> +     if (r == ARRAY_SIZE(msg))
>> +             return len;
>> +
>> +     return r;
>
> If you like, here you could do
>
>         return (r == ARRAY_SIZE(msg)) ? len : r;
>
> Usually I like more this notation because keeps the code more
> compact and immediate to read, but you don't have to

Yes, makes sense for "beautification" :)
Will change

>
>> +     mutex_lock(&tc358765_i2c->xfer_lock);
>> +     ret = i2c_transfer(tc358765_i2c->client->adapter, &msg, 1);
>> +     mutex_unlock(&tc358765_i2c->xfer_lock);
>> +
>> +     if (ret != 1)
>> +             return ret;
>> +     return 0;
>
> Also here you could do
>
>         return (ret != 1) ? ret : 0;
>
> But this is more taste :)
>
>> +static ssize_t tc358765_seq_write(struct file *filp, const char __user *ubuf,
>> +                                             size_t size, loff_t *ppos)
>> +{
>> +     struct device *dev = tc358765_debug.dev;
>> +     unsigned i, reg_count;
>> +     u32 value = 0;
>> +     int error = 0;
>> +     /* kids, don't use register names that long */
>
> I won't, promised, but please, drop this comment :)
>
>> +     char name[30];
>> +     char buf[50];
>> +
>> +     if (size >= sizeof(buf))
>> +             size = sizeof(buf);
>
> what's the point of this?

This is a way to limit copied from userspace data by available buffer size,
widely used in current kernel sources. Are you implying there is some
better (more graceful) way?

>
>> +static void tc358765_uninitialize_debugfs(void)
>> +{
>> +     if (tc358765_debug.dir)
>> +             debugfs_remove_recursive(tc358765_debug.dir);
>
> WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
> #435: FILE: video/omap2/displays/panel-tc358765.c:435:
> +       if (tc358765_debug.dir)
> +               debugfs_remove_recursive(tc358765_debug.dir);

Will fix it..

>
>
>> +static struct tc358765_board_data *get_board_data(struct omap_dss_device
>> +                                                             *dssdev)
>> +{
>> +     return (struct tc358765_board_data *)dssdev->data;
>
> You shouldn't need for this cast, does it complain?

yes, we don't need this :)

>
>> +}
>> +
>> +static void tc358765_get_timings(struct omap_dss_device *dssdev,
>> +             struct omap_video_timings *timings)
>> +{
>> +     *timings = dssdev->panel.timings;
>> +}
>> +
>> +static void tc358765_set_timings(struct omap_dss_device *dssdev,
>> +             struct omap_video_timings *timings)
>> +{
>> +     dev_info(&dssdev->dev, "set_timings() not implemented\n");
>
> ... then drop the function :)

I need to check if this will have any side effects in places where
this is used. I mean next:

|  if (blabla->set_timings)
|            blabla->set_timings();
|  else
|            do_another_thing();

But it seems this may be safely removed

>
>> +     if ((pins[2] & 1) || (pins[3] & 1)) {
>> +             lanes |= (1 << 1);
>> +             ret |= tc358765_write_register(dssdev, PPI_D0S_CLRSIPOCOUNT,
>> +                                                     board_data->clrsipo);
>> +     }
>> +     if ((pins[4] & 1) || (pins[5] & 1)) {
>> +             lanes |= (1 << 2);
>> +             ret |= tc358765_write_register(dssdev, PPI_D1S_CLRSIPOCOUNT,
>> +                                                     board_data->clrsipo);
>> +     }
>> +     if ((pins[6] & 1) || (pins[7] & 1)) {
>> +             lanes |= (1 << 3);
>> +             ret |= tc358765_write_register(dssdev, PPI_D2S_CLRSIPOCOUNT,
>> +                                                     board_data->clrsipo);
>> +     }
>> +     if ((pins[8] & 1) || (pins[9] & 1)) {
>> +             lanes |= (1 << 4);
>> +             ret |= tc358765_write_register(dssdev, PPI_D3S_CLRSIPOCOUNT,
>> +                                                     board_data->clrsipo);
>> +     }
>
> Can't this be done in one single multiwrighting command since
> this registers are consecutive?
>
> You build once the array to write and you send it at once.

In this particular case I disagree. Yes, it will be a little bit
faster, however:
1) we write this for panel initialization only (so no impact in other cases)
2) multiwriting of array will make code reading more difficult

So I would like to leave it as-is
Same is for next your similar comment.

>
> Moreover it would be nice to have a name for all those nombers

Okay, will replace magic numbers by defined values

>
>> +     ret |= tc358765_write_register(dssdev, HTIM1,
>> +             (tc358765_timings.hbp << 16) | tc358765_timings.hsw);
>> +     ret |= tc358765_write_register(dssdev, HTIM2,
>> +             ((tc358765_timings.hfp << 16) | tc358765_timings.x_res));
>> +     ret |= tc358765_write_register(dssdev, VTIM1,
>> +             ((tc358765_timings.vbp << 16) | tc358765_timings.vsw));
>> +     ret |= tc358765_write_register(dssdev, VTIM2,
>> +             ((tc358765_timings.vfp << 16) | tc358765_timings.y_res));
>
> also this and all the other cases I haven't checked
>
>> +static int tc358765_enable(struct omap_dss_device *dssdev)
>> +{
>> +     struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
>> +     int r = 0;
>
> this initialisation is useless

Agree

>
>> +     if (r) {
>> +             dev_dbg(&dssdev->dev, "enable failed\n");
>
> Here you could choose a different print level, I would have used
> dev_err instead.

Agree

>
>> +static int tc358765_i2c_probe(struct i2c_client *client,
>> +                                const struct i2c_device_id *id)
>> +{
>> +     tc358765_i2c = devm_kzalloc(&client->dev, sizeof(*tc358765_i2c), GFP_KERNEL);
>
> WARNING: line over 80 characters
> #927: FILE: video/omap2/displays/panel-tc358765.c:927:
> +       tc358765_i2c = devm_kzalloc(&client->dev, sizeof(*tc358765_i2c), GFP_KERNEL);

Agree :)

>
>
>> +     /* store i2c_client pointer on private data structure */
>> +     tc358765_i2c->client = client;
>> +
>> +     /* store private data structure pointer on i2c_client structure */
>> +     i2c_set_clientdata(client, tc358765_i2c);
>> +
>> +     /* init mutex */
>> +     mutex_init(&tc358765_i2c->xfer_lock);
>> +     dev_err(&client->dev, "D2L i2c initialized\n");
>
> while here dev_dbg (or dev_info) are better.

Agree

>
>> +static int __init tc358765_init(void)
>> +{
>> +     int r;
>> +     tc358765_i2c = NULL;
>> +     r = i2c_add_driver(&tc358765_i2c_driver);
>> +     if (r < 0) {
>> +             printk(KERN_WARNING "d2l i2c driver registration failed\n");
>
> WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ...  then pr_warn(...  to printk(KERN_WARNING ...
> #981: FILE: video/omap2/displays/panel-tc358765.c:981:
> +               printk(KERN_WARNING "d2l i2c driver registration failed\n");

Agree

--
Best regards,
Ruslan

>
>
> Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andi Shyti Feb. 17, 2013, 2:17 p.m. UTC | #3
> >> +     char name[30];
> >> +     char buf[50];
> >> +
> >> +     if (size >= sizeof(buf))
> >> +             size = sizeof(buf);
> >
> > what's the point of this?
> 
> This is a way to limit copied from userspace data by available buffer size,
> widely used in current kernel sources. Are you implying there is some
> better (more graceful) way?

No indeed :)
There is no other way, sorry for polluting the review :)

> >> +     if ((pins[2] & 1) || (pins[3] & 1)) {
> >> +             lanes |= (1 << 1);
> >> +             ret |= tc358765_write_register(dssdev, PPI_D0S_CLRSIPOCOUNT,
> >> +                                                     board_data->clrsipo);
> >> +     }
> >> +     if ((pins[4] & 1) || (pins[5] & 1)) {
> >> +             lanes |= (1 << 2);
> >> +             ret |= tc358765_write_register(dssdev, PPI_D1S_CLRSIPOCOUNT,
> >> +                                                     board_data->clrsipo);
> >> +     }
> >> +     if ((pins[6] & 1) || (pins[7] & 1)) {
> >> +             lanes |= (1 << 3);
> >> +             ret |= tc358765_write_register(dssdev, PPI_D2S_CLRSIPOCOUNT,
> >> +                                                     board_data->clrsipo);
> >> +     }
> >> +     if ((pins[8] & 1) || (pins[9] & 1)) {
> >> +             lanes |= (1 << 4);
> >> +             ret |= tc358765_write_register(dssdev, PPI_D3S_CLRSIPOCOUNT,
> >> +                                                     board_data->clrsipo);
> >> +     }
> >
> > Can't this be done in one single multiwrighting command since
> > this registers are consecutive?
> >
> > You build once the array to write and you send it at once.
> 
> In this particular case I disagree. Yes, it will be a little bit
> faster, however:
> 1) we write this for panel initialization only (so no impact in other cases)
> 2) multiwriting of array will make code reading more difficult
> 
> So I would like to leave it as-is
> Same is for next your similar comment.

If the hw is providing us some ways for simplifying the code I
would use it. In this case we are talking about the i2c feature
of multiwriting and multireading.

Let's assume that we want to write on 8 different consecutive
registers. In my opinion this aproach is quite "heavy":

  uX register;

  register = value1;
  i2c_write(REG1, register);

  register = value2;
  i2c_write(REG2, register);

  ...

Usually what I do is this:

  uX register[8];

  for (i = 0; i < 8; i++)
    register |= valuei << i; (or register[i] = valuei or whatever)

  i2c_multi_write(REG, register, 8);

of course this is a simplified example in pseudocode. I think
it's more readable and we are making a better use of the i2c
protocol.

In your case you have some if statement that are making the multi
writing more difficult, but still is not impossible.

At the end it's still a matter of taste, so that you are free to
choose whatever you prefer :)

Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ruslan Bilovol Feb. 18, 2013, 2:33 p.m. UTC | #4
Hi Andy,

On Sun, Feb 17, 2013 at 4:17 PM, Andi Shyti <andi.shyti@gmail.com> wrote:
>> >> +     char name[30];
>> >> +     char buf[50];
>> >> +
>> >> +     if (size >= sizeof(buf))
>> >> +             size = sizeof(buf);
>> >
>> > what's the point of this?
>>
>> This is a way to limit copied from userspace data by available buffer size,
>> widely used in current kernel sources. Are you implying there is some
>> better (more graceful) way?
>
> No indeed :)
> There is no other way, sorry for polluting the review :)
>
>> >> +     if ((pins[2] & 1) || (pins[3] & 1)) {
>> >> +             lanes |= (1 << 1);
>> >> +             ret |= tc358765_write_register(dssdev, PPI_D0S_CLRSIPOCOUNT,
>> >> +                                                     board_data->clrsipo);
>> >> +     }
>> >> +     if ((pins[4] & 1) || (pins[5] & 1)) {
>> >> +             lanes |= (1 << 2);
>> >> +             ret |= tc358765_write_register(dssdev, PPI_D1S_CLRSIPOCOUNT,
>> >> +                                                     board_data->clrsipo);
>> >> +     }
>> >> +     if ((pins[6] & 1) || (pins[7] & 1)) {
>> >> +             lanes |= (1 << 3);
>> >> +             ret |= tc358765_write_register(dssdev, PPI_D2S_CLRSIPOCOUNT,
>> >> +                                                     board_data->clrsipo);
>> >> +     }
>> >> +     if ((pins[8] & 1) || (pins[9] & 1)) {
>> >> +             lanes |= (1 << 4);
>> >> +             ret |= tc358765_write_register(dssdev, PPI_D3S_CLRSIPOCOUNT,
>> >> +                                                     board_data->clrsipo);
>> >> +     }
>> >
>> > Can't this be done in one single multiwrighting command since
>> > this registers are consecutive?
>> >
>> > You build once the array to write and you send it at once.
>>
>> In this particular case I disagree. Yes, it will be a little bit
>> faster, however:
>> 1) we write this for panel initialization only (so no impact in other cases)
>> 2) multiwriting of array will make code reading more difficult
>>
>> So I would like to leave it as-is
>> Same is for next your similar comment.
>
> If the hw is providing us some ways for simplifying the code I
> would use it. In this case we are talking about the i2c feature
> of multiwriting and multireading.
>
> Let's assume that we want to write on 8 different consecutive
> registers. In my opinion this aproach is quite "heavy":
>
>   uX register;
>
>   register = value1;
>   i2c_write(REG1, register);
>
>   register = value2;
>   i2c_write(REG2, register);
>
>   ...
>
> Usually what I do is this:
>
>   uX register[8];
>
>   for (i = 0; i < 8; i++)
>     register |= valuei << i; (or register[i] = valuei or whatever)
>
>   i2c_multi_write(REG, register, 8);
>
> of course this is a simplified example in pseudocode. I think
> it's more readable and we are making a better use of the i2c
> protocol.
>
> In your case you have some if statement that are making the multi
> writing more difficult, but still is not impossible.
>
> At the end it's still a matter of taste, so that you are free to
> choose whatever you prefer :)

Thank you for reviewing this.
Unfortunately, this driver is not accepted due to future OMAP DSS rework.

I will take into account your comments when will reimplement it for new
DSS architecture.

Thanks and best regards,
Ruslan

>
> Andi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index c3853c9..c6ab261 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -72,4 +72,19 @@  config PANEL_N8X0
 	depends on BACKLIGHT_CLASS_DEVICE
 	help
 	  This is the LCD panel used on Nokia N8x0
+
+config PANEL_TC358765
+	tristate "Toshiba TC358765 DSI-2-LVDS bridge"
+	depends on OMAP2_DSS_DSI && I2C
+	select BACKLIGHT_CLASS_DEVICE
+	help
+		Toshiba TC358765 DSI-2-LVDS chip with 1024x768 panel,
+		which can be found in OMAP4-based Blaze Tablet boards
+		and some other boards.
+
+config TC358765_DEBUG
+	bool "Toshiba TC358765 DSI-2-LVDS chip debug"
+	depends on PANEL_TC358765 && DEBUG_FS
+	help
+	  Support of TC358765 DSI-2-LVDS chip register access via debugfs
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 58a5176..b9f2ab6 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -9,3 +9,4 @@  obj-$(CONFIG_PANEL_PICODLP) +=  panel-picodlp.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
 obj-$(CONFIG_PANEL_N8X0) += panel-n8x0.o
+obj-$(CONFIG_PANEL_TC358765) += panel-tc358765.o
diff --git a/drivers/video/omap2/displays/panel-tc358765.c b/drivers/video/omap2/displays/panel-tc358765.c
new file mode 100644
index 0000000..7e4f9f4
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-tc358765.c
@@ -0,0 +1,1000 @@ 
+/*
+ * Toshiba TC358765 DSI-to-LVDS chip driver
+ *
+ * Copyright (C) Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> (3.0)
+ * Author: Sergii Kibrik <sergiikibrik@ti.com> (3.4)
+ * Author: Ruslan Bilovol <ruslan.bilovol@ti.com> (3.8+)
+ *
+ * Based on original version from Jerry Alexander <x0135174@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-tc358765.h>
+
+#include "panel-tc358765.h"
+
+#define A_RO 0x1
+#define A_WO 0x2
+#define A_RW (A_RO|A_WO)
+
+#define FLD_MASK(start, end)	(((1 << ((start) - (end) + 1)) - 1) << (end))
+#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
+#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end))
+#define FLD_MOD(orig, val, start, end) \
+	(((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end))
+
+static struct omap_video_timings tc358765_timings;
+static struct tc358765_board_data *get_board_data(struct omap_dss_device
+					*dssdev) __attribute__ ((unused));
+
+/* device private data structure */
+struct tc358765_data {
+	struct mutex lock;
+
+	struct omap_dss_device *dssdev;
+
+	int channel0;
+	int channel1;
+
+	struct omap_dsi_pin_config pin_config;
+};
+
+static struct {
+	struct i2c_client *client;
+	struct mutex xfer_lock;
+} *tc358765_i2c;
+
+
+#ifdef CONFIG_TC358765_DEBUG
+
+struct {
+	struct device *dev;
+	struct dentry *dir;
+} tc358765_debug;
+
+struct tc358765_reg {
+	const char *name;
+	u16 reg;
+	u8 perm:2;
+} tc358765_regs[] = {
+	/* DSI D-PHY Layer Registers */
+	{ "D0W_DPHYCONTTX", D0W_DPHYCONTTX, A_RW },
+	{ "CLW_DPHYCONTRX", CLW_DPHYCONTRX, A_RW },
+	{ "D0W_DPHYCONTRX", D0W_DPHYCONTRX, A_RW },
+	{ "D1W_DPHYCONTRX", D1W_DPHYCONTRX, A_RW },
+	{ "D2W_DPHYCONTRX", D2W_DPHYCONTRX, A_RW },
+	{ "D3W_DPHYCONTRX", D3W_DPHYCONTRX, A_RW },
+	{ "COM_DPHYCONTRX", COM_DPHYCONTRX, A_RW },
+	{ "CLW_CNTRL", CLW_CNTRL, A_RW },
+	{ "D0W_CNTRL", D0W_CNTRL, A_RW },
+	{ "D1W_CNTRL", D1W_CNTRL, A_RW },
+	{ "D2W_CNTRL", D2W_CNTRL, A_RW },
+	{ "D3W_CNTRL", D3W_CNTRL, A_RW },
+	{ "DFTMODE_CNTRL", DFTMODE_CNTRL, A_RW },
+	/* DSI PPI Layer Registers */
+	{ "PPI_STARTPPI", PPI_STARTPPI, A_RW },
+	{ "PPI_BUSYPPI", PPI_BUSYPPI, A_RO },
+	{ "PPI_LINEINITCNT", PPI_LINEINITCNT, A_RW },
+	{ "PPI_LPTXTIMECNT", PPI_LPTXTIMECNT, A_RW },
+	{ "PPI_LANEENABLE", PPI_LANEENABLE, A_RW },
+	{ "PPI_TX_RX_TA", PPI_TX_RX_TA, A_RW },
+	{ "PPI_CLS_ATMR", PPI_CLS_ATMR, A_RW },
+	{ "PPI_D0S_ATMR", PPI_D0S_ATMR, A_RW },
+	{ "PPI_D1S_ATMR", PPI_D1S_ATMR, A_RW },
+	{ "PPI_D2S_ATMR", PPI_D2S_ATMR, A_RW },
+	{ "PPI_D3S_ATMR", PPI_D3S_ATMR, A_RW },
+	{ "PPI_D0S_CLRSIPOCOUNT", PPI_D0S_CLRSIPOCOUNT, A_RW },
+	{ "PPI_D1S_CLRSIPOCOUNT", PPI_D1S_CLRSIPOCOUNT, A_RW },
+	{ "PPI_D2S_CLRSIPOCOUNT", PPI_D2S_CLRSIPOCOUNT, A_RW },
+	{ "PPI_D3S_CLRSIPOCOUNT", PPI_D3S_CLRSIPOCOUNT, A_RW },
+	{ "CLS_PRE", CLS_PRE, A_RW },
+	{ "D0S_PRE", D0S_PRE, A_RW },
+	{ "D1S_PRE", D1S_PRE, A_RW },
+	{ "D2S_PRE", D2S_PRE, A_RW },
+	{ "D3S_PRE", D3S_PRE, A_RW },
+	{ "CLS_PREP", CLS_PREP, A_RW },
+	{ "D0S_PREP", D0S_PREP, A_RW },
+	{ "D1S_PREP", D1S_PREP, A_RW },
+	{ "D2S_PREP", D2S_PREP, A_RW },
+	{ "D3S_PREP", D3S_PREP, A_RW },
+	{ "CLS_ZERO", CLS_ZERO, A_RW },
+	{ "D0S_ZERO", D0S_ZERO, A_RW },
+	{ "D1S_ZERO", D1S_ZERO, A_RW },
+	{ "D2S_ZERO", D2S_ZERO, A_RW  },
+	{ "D3S_ZERO", D3S_ZERO, A_RW },
+	{ "PPI_CLRFLG", PPI_CLRFLG, A_RW },
+	{ "PPI_CLRSIPO", PPI_CLRSIPO, A_RW },
+	{ "PPI_HSTimeout", PPI_HSTimeout, A_RW },
+	{ "PPI_HSTimeoutEnable", PPI_HSTimeoutEnable, A_RW },
+	/* DSI Protocol Layer Registers */
+	{ "DSI_STARTDSI", DSI_STARTDSI, A_WO },
+	{ "DSI_BUSYDSI", DSI_BUSYDSI, A_RO },
+	{ "DSI_LANEENABLE", DSI_LANEENABLE, A_RW },
+	{ "DSI_LANESTATUS0", DSI_LANESTATUS0, A_RO },
+	{ "DSI_LANESTATUS1", DSI_LANESTATUS1, A_RO },
+	{ "DSI_INTSTATUS", DSI_INTSTATUS, A_RO },
+	{ "DSI_INTMASK", DSI_INTMASK, A_RW },
+	{ "DSI_INTCLR", DSI_INTCLR, A_WO },
+	{ "DSI_LPTXTO", DSI_LPTXTO, A_RW },
+	/* DSI General Registers */
+	{ "DSIERRCNT", DSIERRCNT, A_RW },
+	/* DSI Application Layer Registers */
+	{ "APLCTRL", APLCTRL, A_RW },
+	{ "RDPKTLN", RDPKTLN, A_RW },
+	/* Video Path Registers */
+	{ "VPCTRL", VPCTRL, A_RW },
+	{ "HTIM1", HTIM1, A_RW },
+	{ "HTIM2",  HTIM2, A_RW },
+	{ "VTIM1", VTIM1, A_RW },
+	{ "VTIM2", VTIM2, A_RW },
+	{ "VFUEN", VFUEN, A_RW },
+	/* LVDS Registers */
+	{ "LVMX0003", LVMX0003, A_RW },
+	{ "LVMX0407", LVMX0407, A_RW },
+	{ "LVMX0811", LVMX0811, A_RW },
+	{ "LVMX1215", LVMX1215, A_RW },
+	{ "LVMX1619", LVMX1619, A_RW },
+	{ "LVMX2023", LVMX2023, A_RW },
+	{ "LVMX2427", LVMX2427, A_RW },
+	{ "LVCFG", LVCFG, A_RW },
+	{ "LVPHY0", LVPHY0, A_RW },
+	{ "LVPHY1", LVPHY1, A_RW },
+	/* System Registers */
+	{ "SYSSTAT", SYSSTAT, A_RO },
+	{ "SYSRST", SYSRST, A_WO },
+	/* GPIO Registers */
+	{ "GPIOC", GPIOC, A_RW },
+	{ "GPIOO", GPIOO, A_RW },
+	{ "GPIOI", GPIOI, A_RO },
+	/* I2C Registers */
+	{ "I2CTIMCTRL", I2CTIMCTRL, A_RW },
+	{ "I2CMADDR", I2CMADDR, A_RW },
+	{ "WDATAQ", WDATAQ, A_WO },
+	{ "RDATAQ", RDATAQ, A_WO },
+	/* Chip/Rev Registers */
+	{ "IDREG", IDREG, A_RO },
+	/* Debug Registers */
+	{ "DEBUG00", DEBUG00, A_RW },
+	{ "DEBUG01", DEBUG01, A_RW },
+};
+#endif
+
+static int tc358765_read_block(u16 reg, u8 *data, int len)
+{
+	unsigned char wb[2];
+	struct i2c_msg msg[2];
+	int r;
+	mutex_lock(&tc358765_i2c->xfer_lock);
+	wb[0] = (reg & 0xff00) >> 8;
+	wb[1] = reg & 0xff;
+	msg[0].addr = tc358765_i2c->client->addr;
+	msg[0].len = 2;
+	msg[0].flags = 0;
+	msg[0].buf = wb;
+	msg[1].addr = tc358765_i2c->client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = len;
+	msg[1].buf = data;
+
+	r = i2c_transfer(tc358765_i2c->client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&tc358765_i2c->xfer_lock);
+
+	if (r == ARRAY_SIZE(msg))
+		return len;
+
+	return r;
+}
+
+static int tc358765_i2c_read(u16 reg, u32 *val)
+{
+	int r;
+	u8 data[4];
+	data[0] = data[1] = data[2] = data[3] = 0;
+
+	r = tc358765_read_block(reg, data, ARRAY_SIZE(data));
+	if (r != ARRAY_SIZE(data))
+		return r;
+
+	*val = ((int)data[3] << 24) | ((int)(data[2]) << 16) |
+	    ((int)(data[1]) << 8) | ((int)(data[0]));
+	return 0;
+}
+
+static int tc358765_dsi_read(struct omap_dss_device *dssdev, u16 reg, u32 *val)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+	u8 buf[4];
+	int r;
+
+	r = dsi_vc_generic_read_2(dssdev, d2d->channel1, ((u8 *)&reg)[0],
+				((u8 *)&reg)[1], buf, 4);
+	if (r < 0) {
+		dev_err(&dssdev->dev, "0x%x read failed with status %d\n",
+								reg, r);
+		return r;
+	}
+
+	*val = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+	return 0;
+}
+
+static int tc358765_read_register(struct omap_dss_device *dssdev,
+					u16 reg, u32 *val)
+{
+	int ret = 0;
+	pm_runtime_get_sync(&dssdev->dev);
+	/* I2C is preferred way of reading, but fall back to DSI
+	 * if I2C didn't got initialized
+	*/
+	if (tc358765_i2c)
+		ret = tc358765_i2c_read(reg, val);
+	else
+		ret = tc358765_dsi_read(dssdev, reg, val);
+	pm_runtime_put_sync(&dssdev->dev);
+
+	return ret;
+}
+
+static int tc358765_write_register(struct omap_dss_device *dssdev, u16 reg,
+		u32 value)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+	u8 buf[6];
+	int r;
+
+	buf[0] = (reg >> 0) & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	buf[2] = (value >> 0) & 0xff;
+	buf[3] = (value >> 8) & 0xff;
+	buf[4] = (value >> 16) & 0xff;
+	buf[5] = (value >> 24) & 0xff;
+
+	r = dsi_vc_generic_write_nosync(dssdev, d2d->channel1, buf, 6);
+	if (r)
+		dev_err(&dssdev->dev, "reg write reg(%x) val(%x) failed: %d\n",
+			       reg, value, r);
+	return r;
+}
+
+/****************************
+********* DEBUG *************
+****************************/
+#ifdef CONFIG_TC358765_DEBUG
+static int tc358765_write_register_i2c(u16 reg, u32 val)
+{
+	int ret = -ENODEV;
+	unsigned char buf[6];
+	struct i2c_msg msg;
+
+	if (!tc358765_i2c) {
+		dev_err(tc358765_debug.dev, "%s: I2C not initilized\n",
+							__func__);
+		return ret;
+	}
+
+	buf[0] = (reg >> 8) & 0xff;
+	buf[1] = (reg >> 0) & 0xff;
+	buf[2] = (val >> 0) & 0xff;
+	buf[3] = (val >> 8) & 0xff;
+	buf[4] = (val >> 16) & 0xff;
+	buf[5] = (val >> 24) & 0xff;
+	msg.addr = tc358765_i2c->client->addr;
+	msg.len = sizeof(buf);
+	msg.flags = 0;
+	msg.buf = buf;
+
+	mutex_lock(&tc358765_i2c->xfer_lock);
+	ret = i2c_transfer(tc358765_i2c->client->adapter, &msg, 1);
+	mutex_unlock(&tc358765_i2c->xfer_lock);
+
+	if (ret != 1)
+		return ret;
+	return 0;
+}
+
+
+static int tc358765_registers_show(struct seq_file *seq, void *pos)
+{
+	struct device *dev = tc358765_debug.dev;
+	unsigned i, reg_count;
+	uint value;
+
+	if (!tc358765_i2c) {
+		dev_warn(dev,
+			"failed to read register: I2C not initialized\n");
+		return -ENODEV;
+	}
+
+	reg_count = sizeof(tc358765_regs) / sizeof(tc358765_regs[0]);
+	pm_runtime_get_sync(dev);
+	for (i = 0; i < reg_count; i++) {
+		if (tc358765_regs[i].perm & A_RO) {
+			tc358765_i2c_read(tc358765_regs[i].reg, &value);
+			seq_printf(seq, "%-20s = 0x%02X\n",
+					tc358765_regs[i].name, value);
+		}
+	}
+
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+static ssize_t tc358765_seq_write(struct file *filp, const char __user *ubuf,
+						size_t size, loff_t *ppos)
+{
+	struct device *dev = tc358765_debug.dev;
+	unsigned i, reg_count;
+	u32 value = 0;
+	int error = 0;
+	/* kids, don't use register names that long */
+	char name[30];
+	char buf[50];
+
+	if (size >= sizeof(buf))
+		size = sizeof(buf);
+
+	if (copy_from_user(&buf, ubuf, size))
+		return -EFAULT;
+
+	buf[size-1] = '\0';
+	if (sscanf(buf, "%s %x", name, &value) != 2) {
+		dev_err(dev, "%s: unable to parse input\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!tc358765_i2c) {
+		dev_warn(dev,
+			"failed to write register: I2C not initialized\n");
+		return -ENODEV;
+	}
+
+	reg_count = sizeof(tc358765_regs) / sizeof(tc358765_regs[0]);
+	for (i = 0; i < reg_count; i++) {
+		if (!strcmp(name, tc358765_regs[i].name)) {
+			if (!(tc358765_regs[i].perm & A_WO)) {
+				dev_err(dev, "%s is write-protected\n", name);
+				return -EACCES;
+			}
+
+			error = tc358765_write_register_i2c(
+				tc358765_regs[i].reg, value);
+			if (error) {
+				dev_err(dev, "%s: failed to write %s\n",
+					__func__, name);
+				return error;
+			}
+
+			return size;
+		}
+	}
+
+	dev_err(dev, "%s: no such register %s\n", __func__, name);
+
+	return size;
+}
+
+static ssize_t tc358765_seq_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, tc358765_registers_show, inode->i_private);
+}
+
+static const struct file_operations tc358765_debug_fops = {
+	.open		= tc358765_seq_open,
+	.read		= seq_read,
+	.write		= tc358765_seq_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int tc358765_initialize_debugfs(struct omap_dss_device *dssdev)
+{
+	tc358765_debug.dir = debugfs_create_dir("tc358765", NULL);
+	if (IS_ERR(tc358765_debug.dir)) {
+		int ret = PTR_ERR(tc358765_debug.dir);
+		tc358765_debug.dir = NULL;
+		return ret;
+	}
+
+	tc358765_debug.dev = &dssdev->dev;
+	debugfs_create_file("registers", S_IRWXU, tc358765_debug.dir,
+			dssdev, &tc358765_debug_fops);
+	return 0;
+}
+
+static void tc358765_uninitialize_debugfs(void)
+{
+	if (tc358765_debug.dir)
+		debugfs_remove_recursive(tc358765_debug.dir);
+	tc358765_debug.dir = NULL;
+	tc358765_debug.dev = NULL;
+}
+
+#else
+static int tc358765_initialize_debugfs(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void tc358765_uninitialize_debugfs(void)
+{
+}
+#endif
+
+static struct tc358765_board_data *get_board_data(struct omap_dss_device
+								*dssdev)
+{
+	return (struct tc358765_board_data *)dssdev->data;
+}
+
+static void tc358765_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static void tc358765_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	dev_info(&dssdev->dev, "set_timings() not implemented\n");
+}
+
+static int tc358765_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	if (unlikely(!timings)) {
+		WARN(true, "%s: timings NULL pointer was passed\n", __func__);
+		return -EINVAL;
+	}
+
+	if (tc358765_timings.x_res != timings->x_res ||
+			tc358765_timings.y_res != timings->y_res ||
+			tc358765_timings.pixel_clock != timings->pixel_clock ||
+			tc358765_timings.hsw != timings->hsw ||
+			tc358765_timings.hfp != timings->hfp ||
+			tc358765_timings.hbp != timings->hbp ||
+			tc358765_timings.vsw != timings->vsw ||
+			tc358765_timings.vfp != timings->vfp ||
+			tc358765_timings.vbp != timings->vbp)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void tc358765_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres)
+{
+	*xres = tc358765_timings.x_res;
+	*yres = tc358765_timings.y_res;
+}
+
+static void tc358765_hw_reset(struct omap_dss_device *dssdev)
+{
+
+	if (dssdev == NULL || !gpio_is_valid(dssdev->reset_gpio))
+		return;
+
+	gpio_set_value(dssdev->reset_gpio, 1);
+	usleep_range(200, 1000);
+	/* reset the panel */
+	gpio_set_value(dssdev->reset_gpio, 0);
+	/* assert reset */
+	usleep_range(200, 1000);
+	gpio_set_value(dssdev->reset_gpio, 1);
+	/* wait after releasing reset */
+	msleep(200);
+
+	return;
+}
+
+static void tc358765_probe_pdata(struct tc358765_data *d2d,
+		const struct tc358765_board_data *pdata)
+{
+	d2d->pin_config = pdata->pin_config;
+}
+
+static int tc358765_probe(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d;
+	int r = 0;
+
+	dev_dbg(&dssdev->dev, "tc358765_probe\n");
+
+	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
+	tc358765_timings = dssdev->panel.timings;
+
+	d2d = devm_kzalloc(&dssdev->dev, sizeof(*d2d), GFP_KERNEL);
+	if (!d2d) {
+		r = -ENOMEM;
+		goto err;
+	}
+
+	d2d->dssdev = dssdev;
+
+	mutex_init(&d2d->lock);
+
+	dev_set_drvdata(&dssdev->dev, d2d);
+
+	if (dssdev->data) {
+		const struct tc358765_board_data *pdata = dssdev->data;
+
+		tc358765_probe_pdata(d2d, pdata);
+	} else {
+		return -ENODEV;
+	}
+
+	/* channel0 used for video packets */
+	r = omap_dsi_request_vc(dssdev, &d2d->channel0);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to get virtual channel0\n");
+		goto err;
+	}
+
+	r = omap_dsi_set_vc_id(dssdev, d2d->channel0, 0);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to set VC_ID0\n");
+		goto err_ch0;
+	}
+
+	/* channel1 used for registers access in LP mode */
+	r = omap_dsi_request_vc(dssdev, &d2d->channel1);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to get virtual channel1\n");
+		goto err_ch0;
+	}
+
+	r = omap_dsi_set_vc_id(dssdev, d2d->channel1, 0);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to set VC_ID1\n");
+		goto err_ch1;
+	}
+	r = tc358765_initialize_debugfs(dssdev);
+	if (r)
+		dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+
+	dev_dbg(&dssdev->dev, "tc358765_probe done\n");
+	return 0;
+
+err_ch1:
+	omap_dsi_release_vc(dssdev, d2d->channel1);
+err_ch0:
+	omap_dsi_release_vc(dssdev, d2d->channel0);
+err:
+	mutex_destroy(&d2d->lock);
+	devm_kfree(&dssdev->dev, d2d);
+	return r;
+}
+
+static void tc358765_remove(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+
+	tc358765_uninitialize_debugfs();
+
+	omap_dsi_release_vc(dssdev, d2d->channel0);
+	omap_dsi_release_vc(dssdev, d2d->channel1);
+	mutex_destroy(&d2d->lock);
+	devm_kfree(&dssdev->dev, d2d);
+}
+
+static int tc358765_init_ppi(struct omap_dss_device *dssdev)
+{
+	u32 go_cnt, sure_cnt, val = 0;
+	u8 lanes = 0;
+	int ret = 0;
+	struct tc358765_board_data *board_data = get_board_data(dssdev);
+	const int *pins = board_data->pin_config.pins;
+
+	/*
+	 * This register setting is required only if host wishes to
+	 * perform DSI read transactions
+	 */
+	go_cnt = (board_data->lp_time * 5 - 3) / 4;
+	sure_cnt = DIV_ROUND_UP(board_data->lp_time * 3, 2);
+	val = FLD_MOD(val, go_cnt, 26, 16);
+	val = FLD_MOD(val, sure_cnt, 10, 0);
+	ret |= tc358765_write_register(dssdev, PPI_TX_RX_TA, val);
+
+	/* SYSLPTX Timing Generation Counter */
+	ret |= tc358765_write_register(dssdev, PPI_LPTXTIMECNT,
+					board_data->lp_time);
+
+	/* D*S_CLRSIPOCOUNT = [(THS-SETTLE + THS-ZERO) /
+					HS_byte_clock_period ] */
+
+	if ((pins[0] & 1) || (pins[1] & 1))
+		lanes |= (1 << 0);
+
+	if ((pins[2] & 1) || (pins[3] & 1)) {
+		lanes |= (1 << 1);
+		ret |= tc358765_write_register(dssdev, PPI_D0S_CLRSIPOCOUNT,
+							board_data->clrsipo);
+	}
+	if ((pins[4] & 1) || (pins[5] & 1)) {
+		lanes |= (1 << 2);
+		ret |= tc358765_write_register(dssdev, PPI_D1S_CLRSIPOCOUNT,
+							board_data->clrsipo);
+	}
+	if ((pins[6] & 1) || (pins[7] & 1)) {
+		lanes |= (1 << 3);
+		ret |= tc358765_write_register(dssdev, PPI_D2S_CLRSIPOCOUNT,
+							board_data->clrsipo);
+	}
+	if ((pins[8] & 1) || (pins[9] & 1)) {
+		lanes |= (1 << 4);
+		ret |= tc358765_write_register(dssdev, PPI_D3S_CLRSIPOCOUNT,
+							board_data->clrsipo);
+	}
+
+	ret |= tc358765_write_register(dssdev, PPI_LANEENABLE, lanes);
+	ret |= tc358765_write_register(dssdev, DSI_LANEENABLE, lanes);
+
+	return ret;
+}
+
+static int tc358765_init_video_timings(struct omap_dss_device *dssdev)
+{
+	u32 val;
+	struct tc358765_board_data *board_data = get_board_data(dssdev);
+	int ret;
+	ret = tc358765_read_register(dssdev, VPCTRL, &val);
+	if (ret < 0) {
+		dev_warn(&dssdev->dev,
+			"couldn't access VPCTRL, going on with reset value\n");
+		val = 0;
+	}
+
+	if (dssdev->ctrl.pixel_size == 18) {
+		/* Magic Square FRC available for RGB666 only */
+		val = FLD_MOD(val, board_data->msf, 0, 0);
+		val = FLD_MOD(val, 0, 8, 8);
+	} else {
+		val = FLD_MOD(val, 1, 8, 8);
+	}
+
+	val = FLD_MOD(val, board_data->vtgen, 4, 4);
+	val = FLD_MOD(val, board_data->evtmode, 5, 5);
+	val = FLD_MOD(val, board_data->vsdelay, 31, 20);
+
+	ret = tc358765_write_register(dssdev, VPCTRL, val);
+
+	ret |= tc358765_write_register(dssdev, HTIM1,
+		(tc358765_timings.hbp << 16) | tc358765_timings.hsw);
+	ret |= tc358765_write_register(dssdev, HTIM2,
+		((tc358765_timings.hfp << 16) | tc358765_timings.x_res));
+	ret |= tc358765_write_register(dssdev, VTIM1,
+		((tc358765_timings.vbp << 16) |	tc358765_timings.vsw));
+	ret |= tc358765_write_register(dssdev, VTIM2,
+		((tc358765_timings.vfp << 16) |	tc358765_timings.y_res));
+	return ret;
+}
+
+static int tc358765_write_init_config(struct omap_dss_device *dssdev)
+{
+	struct tc358765_board_data *board_data = get_board_data(dssdev);
+	u32 val;
+	int r;
+
+	/* HACK: dummy read: if we read via DSI, first reads always fail */
+	tc358765_read_register(dssdev, DSI_INTSTATUS, &val);
+
+	r = tc358765_init_ppi(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to initialize PPI layer\n");
+		return r;
+	}
+
+	r = tc358765_write_register(dssdev, PPI_STARTPPI, 0x1);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to start PPI-TX\n");
+		return r;
+	}
+
+	r = tc358765_write_register(dssdev, DSI_STARTDSI, 0x1);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to start DSI-RX\n");
+		return r;
+	}
+
+	/* reset LVDS-PHY */
+	tc358765_write_register(dssdev, LVPHY0, (1 << 22));
+	usleep_range(2000, 3000);
+
+	r = tc358765_read_register(dssdev, LVPHY0, &val);
+	if (r < 0) {
+		dev_warn(&dssdev->dev, "couldn't access LVPHY0, going on with reset value\n");
+		val = 0;
+	}
+	val = FLD_MOD(val, 0, LV_RST_E, LV_RST_B);
+	val = FLD_MOD(val, board_data->lv_is, LV_IS_E, LV_IS_B);
+	val = FLD_MOD(val, board_data->lv_nd, LV_ND_E, LV_ND_B);
+	r = tc358765_write_register(dssdev, LVPHY0, val);
+
+	if (r) {
+		dev_err(&dssdev->dev, "failed to initialize LVDS-PHY\n");
+		return r;
+	}
+
+	r = tc358765_init_video_timings(dssdev);
+
+	if (r) {
+		dev_err(&dssdev->dev, "failed to initialize video path layer\n");
+		return r;
+	}
+
+	r = tc358765_read_register(dssdev, LVCFG, &val);
+	if (r < 0) {
+		dev_warn(&dssdev->dev,
+			"couldn't access LVCFG, going on with reset value\n");
+		val = 0;
+	}
+
+	val = FLD_MOD(val, board_data->pclkdiv, 9, 8);
+	val = FLD_MOD(val, board_data->pclksel, 11, 10);
+	val = FLD_MOD(val, board_data->lvdlink, 1, 1);
+	/* enable LVDS transmitter */
+	val = FLD_MOD(val, 1, 0, 0);
+	r = tc358765_write_register(dssdev, LVCFG, val);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to start LVDS transmitter\n");
+		return r;
+	}
+
+	/* Issue a soft reset to LCD Controller for a clean start */
+	r = tc358765_write_register(dssdev, SYSRST, (1 << 2));
+	/* commit video configuration */
+	r |= tc358765_write_register(dssdev, VFUEN, 0x1);
+	if (r)
+		dev_err(&dssdev->dev, "failed to latch video timings\n");
+	return r;
+}
+
+static int tc358765_power_on(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	/* At power on the first vsync has not been received yet */
+
+	dev_dbg(&dssdev->dev, "power_on\n");
+
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
+
+	r = omapdss_dsi_configure_pins(dssdev, &d2d->pin_config);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to configure DSI pins\n");
+		goto err_disp_enable;
+	}
+
+	omapdss_dsi_set_size(dssdev, dssdev->panel.timings.x_res,
+					dssdev->panel.timings.y_res);
+	omapdss_dsi_set_pixel_format(dssdev, dssdev->panel.dsi_pix_fmt);
+	omapdss_dsi_set_operation_mode(dssdev, dssdev->panel.dsi_mode);
+	omapdss_dsi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dsi_set_videomode_timings(dssdev,
+					&dssdev->panel.dsi_vm_timings);
+
+	r = omapdss_dsi_set_clocks(dssdev, 187200000, 10000000);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to set HS and LP clocks\n");
+		goto err_disp_enable;
+	}
+
+	r = omapdss_dsi_display_enable(dssdev);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DSI\n");
+		goto err_disp_enable;
+	}
+
+	/* reset tc358765 bridge */
+	tc358765_hw_reset(dssdev);
+
+	/*turn on HS clock to bring up bridge i2c slave */
+	omapdss_dsi_vc_enable_hs(dssdev, d2d->channel0, true);
+
+	/* configure D2L chip DSI-RX configuration registers */
+
+	r = tc358765_write_init_config(dssdev);
+	if (r)
+		goto err_write_init;
+
+	r = dsi_enable_video_output(dssdev, d2d->channel0);
+
+	dev_dbg(&dssdev->dev, "power_on done\n");
+
+	return r;
+
+err_write_init:
+	omapdss_dsi_display_disable(dssdev, false, false);
+err_disp_enable:
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	return r;
+}
+
+static void tc358765_power_off(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+
+	dsi_disable_video_output(dssdev, d2d->channel0);
+	dsi_disable_video_output(dssdev, d2d->channel1);
+
+	omapdss_dsi_display_disable(dssdev, false, false);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+}
+
+static void tc358765_disable(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		mutex_lock(&d2d->lock);
+		dsi_bus_lock(dssdev);
+
+		tc358765_power_off(dssdev);
+
+		dsi_bus_unlock(dssdev);
+		mutex_unlock(&d2d->lock);
+	}
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int tc358765_enable(struct omap_dss_device *dssdev)
+{
+	struct tc358765_data *d2d = dev_get_drvdata(&dssdev->dev);
+	int r = 0;
+
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
+		return -EINVAL;
+
+	mutex_lock(&d2d->lock);
+	dsi_bus_lock(dssdev);
+
+	r = tc358765_power_on(dssdev);
+
+	dsi_bus_unlock(dssdev);
+
+	if (r) {
+		dev_dbg(&dssdev->dev, "enable failed\n");
+		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+	} else {
+		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	}
+
+	mutex_unlock(&d2d->lock);
+
+	return r;
+}
+
+static struct omap_dss_driver tc358765_driver = {
+	.probe		= tc358765_probe,
+	.remove		= tc358765_remove,
+
+	.enable		= tc358765_enable,
+	.disable	= tc358765_disable,
+
+	.get_resolution	= tc358765_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+	.get_timings	= tc358765_get_timings,
+	.set_timings	= tc358765_set_timings,
+	.check_timings	= tc358765_check_timings,
+
+	.driver         = {
+		.name   = "tc358765",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int tc358765_i2c_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	tc358765_i2c = devm_kzalloc(&client->dev, sizeof(*tc358765_i2c), GFP_KERNEL);
+	if (tc358765_i2c == NULL)
+		return -ENOMEM;
+
+	/* store i2c_client pointer on private data structure */
+	tc358765_i2c->client = client;
+
+	/* store private data structure pointer on i2c_client structure */
+	i2c_set_clientdata(client, tc358765_i2c);
+
+	/* init mutex */
+	mutex_init(&tc358765_i2c->xfer_lock);
+	dev_err(&client->dev, "D2L i2c initialized\n");
+
+	return 0;
+}
+
+/* driver remove function */
+static int __exit tc358765_i2c_remove(struct i2c_client *client)
+{
+	/* remove client data */
+	i2c_set_clientdata(client, NULL);
+
+	/* destroy mutex */
+	mutex_destroy(&tc358765_i2c->xfer_lock);
+
+	/* free private data memory */
+	devm_kfree(&client->dev, tc358765_i2c);
+
+	return 0;
+}
+
+static const struct i2c_device_id tc358765_i2c_idtable[] = {
+	{"tc358765_i2c_driver", 0},
+	{},
+};
+
+static struct i2c_driver tc358765_i2c_driver = {
+	.probe = tc358765_i2c_probe,
+	.remove = __exit_p(tc358765_i2c_remove),
+	.id_table = tc358765_i2c_idtable,
+	.driver = {
+		   .name  = "d2l",
+		   .owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tc358765_init(void)
+{
+	int r;
+	tc358765_i2c = NULL;
+	r = i2c_add_driver(&tc358765_i2c_driver);
+	if (r < 0) {
+		printk(KERN_WARNING "d2l i2c driver registration failed\n");
+		return r;
+	}
+
+	omap_dss_register_driver(&tc358765_driver);
+	return 0;
+}
+
+static void __exit tc358765_exit(void)
+{
+	omap_dss_unregister_driver(&tc358765_driver);
+	i2c_del_driver(&tc358765_i2c_driver);
+}
+
+module_init(tc358765_init);
+module_exit(tc358765_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TC358765 DSI-2-LVDS Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tc358765.h b/drivers/video/omap2/displays/panel-tc358765.h
new file mode 100644
index 0000000..ffc105d
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-tc358765.h
@@ -0,0 +1,170 @@ 
+/*
+ * Header for DSI-to-LVDS bridge driver
+ *
+ * Copyright (C) 2012 Texas Instruments Inc
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Author: Sergii Kibrik <sergiikibrik@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __PANEL_TC358765_H__
+#define __PANEL_TC358765_H__
+
+/* DSI D-PHY Layer Registers */
+#define	D0W_DPHYCONTTX		0x0004		/* Data Lane 0 DPHY TX */
+#define	CLW_DPHYCONTRX		0x0020		/* Clock Lane DPHY RX */
+#define	D0W_DPHYCONTRX		0x0024		/* Data Land 0 DPHY Rx */
+#define	D1W_DPHYCONTRX		0x0028		/* Data Lane 1 DPHY Rx */
+#define	D2W_DPHYCONTRX		0x002c		/* Data Lane 2 DPHY Rx */
+#define	D3W_DPHYCONTRX		0x0030		/* Data Lane 3 DPHY Rx */
+#define	COM_DPHYCONTRX		0x0038		/* DPHY Rx Common */
+#define	CLW_CNTRL		0x0040		/* Clock Lane */
+#define	D0W_CNTRL		0x0044		/* Data Lane 0 */
+#define	D1W_CNTRL		0x0048		/* Data Lane 1 */
+#define	D2W_CNTRL		0x004c		/* Data Lane 2 */
+#define	D3W_CNTRL		0x0050		/* Data Lane 3 */
+#define	DFTMODE_CNTRL		0x0054		/* DFT Mode */
+
+/* DSI PPI Layer Registers */
+#define	PPI_STARTPPI		0x0104		/* Start control bit */
+#define	PPI_BUSYPPI		0x0108			/* Busy bit */
+#define	PPI_LINEINITCNT		0x0110		/* Line In initialization */
+#define	PPI_LPTXTIMECNT		0x0114		/* LPTX timing signal */
+#define	PPI_LANEENABLE		0x0134		/* Lane Enable */
+#define	PPI_TX_RX_TA		0x013c		/* BTA timing param */
+#define	PPI_CLS_ATMR		0x0140		/* Analog timer fcn */
+#define	PPI_D0S_ATMR		0x0144		/* Analog timer fcn Lane 0 */
+#define	PPI_D1S_ATMR		0x0148		/* Analog timer fcn Lane 1 */
+#define	PPI_D2S_ATMR		0x014c		/* Analog timer fcn Lane 2 */
+#define	PPI_D3S_ATMR		0x0150		/* Analog timer fcn Lane 3 */
+#define	PPI_D0S_CLRSIPOCOUNT	0x0164		/* Assertion timer Lane 0 */
+#define	PPI_D1S_CLRSIPOCOUNT	0x0168		/* Assertion timer Lane 1 */
+#define	PPI_D2S_CLRSIPOCOUNT	0x016c		/* Assertion timer Lane 1 */
+#define	PPI_D3S_CLRSIPOCOUNT	0x0170		/* Assertion timer Lane 1 */
+#define CLS_PRE			0x0180		/* PHY IO cntr */
+#define D0S_PRE			0x0184		/* PHY IO cntr */
+#define D1S_PRE			0x0188		/* PHY IO cntr */
+#define D2S_PRE			0x018c		/* PHY IO cntr */
+#define D3S_PRE			0x0190		/* PHY IO cntr */
+#define CLS_PREP		0x01a0		/* PHY IO cntr */
+#define D0S_PREP		0x01a4		/* PHY IO cntr */
+#define D1S_PREP		0x01a8		/* PHY IO cntr */
+#define D2S_PREP		0x01ac		/* PHY IO cntr */
+#define D3S_PREP		0x01b0		/* PHY IO cntr */
+#define CLS_ZERO		0x01c0		/* PHY IO cntr */
+#define	D0S_ZERO		0x01c4		/* PHY IO cntr */
+#define	D1S_ZERO		0x01c8		/* PHY IO cntr */
+#define	D2S_ZERO		0x01cc		/* PHY IO cntr */
+#define	D3S_ZERO		0x01d0		/* PHY IO cntr */
+#define PPI_CLRFLG		0x01e0		/* PRE cntrs */
+#define PPI_CLRSIPO		0x01e4		/* Clear SIPO */
+#define PPI_HSTimeout		0x01f0		/* HS RX timeout */
+#define PPI_HSTimeoutEnable	0x01f4		/* Enable HS Rx Timeout */
+
+/* DSI Protocol Layer Registers */
+#define DSI_STARTDSI		0x0204		/* DSI TX start bit */
+#define DSI_BUSYDSI		0x0208		/* DSI busy bit */
+#define DSI_LANEENABLE		0x0210		/* Lane enable */
+#define DSI_LANESTATUS0		0x0214		/* HS Rx mode */
+#define DSI_LANESTATUS1		0x0218		/* ULPS or STOP state */
+#define DSI_INTSTATUS		0x0220		/* Interrupt status */
+#define DSI_INTMASK		0x0224		/* Interrupt mask */
+#define DSI_INTCLR		0x0228		/* Interrupt clear */
+#define DSI_LPTXTO		0x0230		/* LP Tx Cntr */
+
+/* DSI General Registers */
+#define	DSIERRCNT		0x0300		/* DSI Error Count */
+
+/* DSI Application Layer Registers */
+#define APLCTRL			0x0400		/* Application Layer Cntrl */
+#define RDPKTLN			0x0404		/* Packet length */
+
+/* Video Path Registers */
+#define	VPCTRL			0x0450		/* Video Path */
+#define HTIM1			0x0454		/* Horizontal Timing */
+#define HTIM2			0x0458		/* Horizontal Timing */
+#define VTIM1			0x045c		/* Vertical Timing */
+#define VTIM2			0x0460		/* Vertical Timing */
+#define VFUEN			0x0464		/* Video Frame Timing */
+
+
+/* LVDS Registers - LVDS Mux Input */
+#define LVMX0003		0x0480		/* Bit 0 to 3*/
+#define LVMX0407		0x0484		/* Bit 4 to 7 */
+#define LVMX0811		0x0488		/* Bit 8 to 11 */
+#define LVMX1215		0x048c		/* Bit 12 to 15 */
+#define LVMX1619		0x0490		/* Bit 16 to 19 */
+#define LVMX2023		0x0494		/* Bit 20 to 23 */
+#define LVMX2427		0x0498		/* Bit 24 to 27 */
+
+#define LVCFG			0x049c		/* LVDS Config */
+#define	LVPHY0			0x04a0		/* LVDS PHY Reg 0 */
+#define	LVPHY1			0x04a1		/* LVDS PHY Reg 1 */
+
+/* LVDS PHY Register 0 (LVPHY0) entries */
+#define LV_RST_B		22		/* LV PHY reset */
+#define LV_RST_E		22
+#define LV_IS_B			14		/* Charge pump current control */
+#define LV_IS_E			15		/* pin for PLL portion */
+#define LV_ND_B			0		/* Frequency Range Select */
+#define LV_ND_E			4
+
+/* System Registers */
+#define SYSSTAT			0x0500		/* System Status */
+#define SYSRST			0x0504		/* System Reset */
+
+/* GPIO Registers */
+#define GPIOC			0x0520		/* GPIO Control */
+#define GPIOO			0x0520		/* GPIO Output */
+#define GPIOI			0x0520		/* GPIO Input */
+
+/* I2C Registers */
+#define I2CTIMCTRL		0x0540
+#define I2CMADDR		0x0544
+#define WDATAQ			0x0548
+#define RDATAQ			0x054C
+
+/* Chip Revision Registers */
+#define IDREG			0x0580		/* Chip and Revision ID */
+
+/* Debug Register */
+#define DEBUG00			0x05a0		/* Debug */
+#define DEBUG01			0x05a4		/* LVDS Data */
+
+/*DSI DCS commands */
+#define DCS_READ_NUM_ERRORS     0x05
+#define DCS_READ_POWER_MODE     0x0a
+#define DCS_READ_MADCTL         0x0b
+#define DCS_READ_PIXEL_FORMAT   0x0c
+#define DCS_RDDSDR              0x0f
+#define DCS_SLEEP_IN            0x10
+#define DCS_SLEEP_OUT           0x11
+#define DCS_DISPLAY_OFF         0x28
+#define DCS_DISPLAY_ON          0x29
+#define DCS_COLUMN_ADDR         0x2a
+#define DCS_PAGE_ADDR           0x2b
+#define DCS_MEMORY_WRITE        0x2c
+#define DCS_TEAR_OFF            0x34
+#define DCS_TEAR_ON             0x35
+#define DCS_MEM_ACC_CTRL        0x36
+#define DCS_PIXEL_FORMAT        0x3a
+#define DCS_BRIGHTNESS          0x51
+#define DCS_CTRL_DISPLAY        0x53
+#define DCS_WRITE_CABC          0x55
+#define DCS_READ_CABC           0x56
+#define DCS_GET_ID1             0xda
+#define DCS_GET_ID2             0xdb
+#define DCS_GET_ID3             0xdc
+
+#endif
diff --git a/include/video/omap-panel-tc358765.h b/include/video/omap-panel-tc358765.h
new file mode 100644
index 0000000..c58e081
--- /dev/null
+++ b/include/video/omap-panel-tc358765.h
@@ -0,0 +1,53 @@ 
+/*
+ * Header for DSI-to-LVDS bridge driver
+ *
+ * Copyright (C) 2012 Texas Instruments Inc
+ * Author: Sergii Kibrik <sergiikibrik@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __VIDEO_TC358765_BOARD_DATA_H__
+#define __VIDEO_TC358765_BOARD_DATA_H__
+
+/**
+ * struct tc358765_board_data - represent DSI-to-LVDS bridge configuration
+ * @lp_time: Timing Generation Counter
+ * @clrsipo: CLRSIPO counter (one value for all lanes)
+ * @lv_is: charge pump control pin
+ * @lv_nd: Feed Back Divider Ratio
+ * @pclkdiv: PCLK Divide Option
+ * @pclksel: PCLK Selection: HSRCK/HbyteHSClkx2/ByteHsClk
+ * @vsdelay: VSYNC Delay
+ * @lvdlink: is single or dual link
+ * @vtgen: drive video timing signals by the on-chip Video Timing Gen module
+ * @msf: enable/disable Magic Square
+ * @evtmode: event/pulse mode of video timing information transmission
+ * @pin_config: DSI pin configuration
+*/
+struct tc358765_board_data {
+	u16	lp_time;
+	u8	clrsipo;
+	u8	lv_is;
+	u8	lv_nd;
+	u8	pclkdiv;
+	u8	pclksel;
+	u16	vsdelay;
+	bool	lvdlink;
+	bool	vtgen;
+	bool	msf;
+	bool	evtmode;
+	struct omap_dsi_pin_config pin_config;
+};
+
+#endif