@@ -111,6 +111,14 @@ void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
+#ifdef CONFIG_SOC_BUS
+void omap_soc_device_init(void);
+#else
+static inline void omap_soc_device_init(void)
+{
+}
+#endif
+
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
void omap2xxx_restart(char mode, const char *cmd);
#else
@@ -18,6 +18,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_SOC_BUS
+#include <linux/sys_soc.h>
+#endif
#include <asm/cputype.h>
@@ -583,3 +588,63 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
else
tap_prod_id = 0x0208;
}
+
+#ifdef CONFIG_SOC_BUS
+
+static const char const *omap_types[] = {
+ [OMAP2_DEVICE_TYPE_TEST] = "TST",
+ [OMAP2_DEVICE_TYPE_EMU] = "EMU",
+ [OMAP2_DEVICE_TYPE_SEC] = "HS",
+ [OMAP2_DEVICE_TYPE_GP] = "GP",
+ [OMAP2_DEVICE_TYPE_BAD] = "BAD",
+};
+
+static const char * __init omap_get_family(void)
+{
+ if (cpu_is_omap24xx())
+ return kasprintf(GFP_KERNEL, "OMAP2");
+ else if (cpu_is_omap34xx())
+ return kasprintf(GFP_KERNEL, "OMAP3");
+ else if (cpu_is_omap44xx())
+ return kasprintf(GFP_KERNEL, "OMAP4");
+ else if (soc_is_omap54xx())
+ return kasprintf(GFP_KERNEL, "OMAP5");
+ else
+ return kasprintf(GFP_KERNEL, "Unknown");
+}
+
+static ssize_t omap_get_type(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", omap_types[omap_type()]);
+}
+
+static struct device_attribute omap_soc_attr =
+ __ATTR(type, S_IRUGO, omap_get_type, NULL);
+
+void __init omap_soc_device_init(void)
+{
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return;
+
+ soc_dev_attr->machine = soc_name;
+ soc_dev_attr->family = omap_get_family();
+ soc_dev_attr->revision = soc_rev;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR_OR_NULL(soc_dev)) {
+ kfree(soc_dev_attr);
+ return;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+ if (!IS_ERR_OR_NULL(parent))
+ device_create_file(parent, &omap_soc_attr);
+}
+#endif /* CONFIG_SOC_BUS */
@@ -383,6 +383,7 @@ static void __init omap_common_late_init(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
+ omap_soc_device_init();
}
#ifdef CONFIG_SOC_OMAP2420
@@ -30,6 +30,7 @@ config ARCH_OMAP2PLUS
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
select USE_OF
+ select SOC_BUS
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
In some situations it is useful for userspace to know some SoC-specific information. For example, this may be used for deciding what kernel module to use or how to better configure some settings etc. This patch exports OMAP SoC information to userspace using existing in Linux kernel SoC infrastructure. This information can be read under /sys/devices/socX directory Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> --- arch/arm/mach-omap2/common.h | 8 ++++++ arch/arm/mach-omap2/id.c | 65 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/io.c | 1 + arch/arm/plat-omap/Kconfig | 1 + 4 files changed, 75 insertions(+)