| Message ID | 1362139864-9233-9-git-send-email-santosh.shilimkar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 17:40-20130301, Santosh Shilimkar wrote: > Add power management code to handle the CPU off mode. Separate > suspend finisher is used for OMAP5(Cortex-A15) because it doesn't > use SCU power status register and external PL310 L2 cache which makes > code flow bit different. > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > --- > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 31 +++++++---- > arch/arm/mach-omap2/omap-secure.h | 1 + > arch/arm/mach-omap2/omap4-sar-layout.h | 2 + > arch/arm/mach-omap2/sleep_omap4plus.S | 80 +++++++++++++++++++++++++++++ > 4 files changed, 104 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > index 9fda96b..275f9a4 100644 > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > @@ -76,10 +76,12 @@ struct cpu_pm_ops { > int (*finish_suspend)(unsigned long cpu_state); > void (*resume)(void); > void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); > + void (*hotplug_restart)(void); > }; > > extern int omap4_finish_suspend(unsigned long cpu_state); > extern void omap4_cpu_resume(void); > +extern int omap5_finish_suspend(unsigned long cpu_state); > > static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); > static struct powerdomain *mpuss_pd; > @@ -102,6 +104,7 @@ struct cpu_pm_ops omap_pm_ops = { > .finish_suspend = default_finish_suspend, > .resume = dummy_cpu_resume, > .scu_prepare = dummy_scu_prepare, > + .hotplug_restart = dummy_cpu_resume, > }; > > /* > @@ -334,7 +337,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) > int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) > { > unsigned int cpu_state = 0; > - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); > > if (omap_rev() == OMAP4430_REV_ES1_0) > return -ENXIO; > @@ -344,7 +346,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) > > clear_cpu_prev_pwrst(cpu); > set_cpu_next_pwrst(cpu, power_state); > - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); > + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart)); > omap_pm_ops.scu_prepare(cpu, power_state); > > /* > @@ -379,6 +381,7 @@ static void enable_mercury_retention_mode(void) > int __init omap4_mpuss_init(void) > { > struct omap4_cpu_pm_info *pm_info; > + u32 cpu_wakeup_addr = 0; > > if (omap_rev() == OMAP4430_REV_ES1_0) { > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > @@ -388,9 +391,13 @@ int __init omap4_mpuss_init(void) > sar_base = omap4_get_sar_ram_base(); > > /* Initilaise per CPU PM information */ > + if (cpu_is_omap44xx()) > + cpu_wakeup_addr = CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > + else if (soc_is_omap54xx()) > + cpu_wakeup_addr = OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > pm_info = &per_cpu(omap4_pm_info, 0x0); > pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; > - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; > pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; > pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); > if (!pm_info->pwrdm) { > @@ -405,14 +412,14 @@ int __init omap4_mpuss_init(void) > /* Initialise CPU0 power domain state to ON */ > pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); > > + if (cpu_is_omap44xx()) > + cpu_wakeup_addr = CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > + else if (soc_is_omap54xx()) > + cpu_wakeup_addr = OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > pm_info = &per_cpu(omap4_pm_info, 0x1); > pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; > - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; > pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; > - if (cpu_is_omap446x()) > - pm_info->secondary_startup = omap_secondary_startup_4460; > - else > - pm_info->secondary_startup = omap_secondary_startup; > > pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); > if (!pm_info->pwrdm) { > @@ -445,15 +452,19 @@ int __init omap4_mpuss_init(void) > > if (cpu_is_omap44xx()) { > omap_pm_ops.finish_suspend = omap4_finish_suspend; > + omap_pm_ops.hotplug_restart = omap_secondary_startup; could we handle omap_pm_ops.hotplug_restart = omap_secondary_startup_4460 here as well with the interest of keeping all function inits in consecutive source location? > omap_pm_ops.resume = omap4_cpu_resume; > omap_pm_ops.scu_prepare = scu_pwrst_prepare; > cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET; > } else if (soc_is_omap54xx()) { > + omap_pm_ops.finish_suspend = omap5_finish_suspend; > + omap_pm_ops.hotplug_restart = omap5_secondary_startup; > cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET; > + enable_mercury_retention_mode(); > } > > - if (soc_is_omap54xx()) > - enable_mercury_retention_mode(); > + if (cpu_is_omap446x()) > + omap_pm_ops.hotplug_restart = omap_secondary_startup_4460; > > return 0; > } > diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h > index 82b3c4c..6f4dbee 100644 > --- a/arch/arm/mach-omap2/omap-secure.h > +++ b/arch/arm/mach-omap2/omap-secure.h > @@ -41,6 +41,7 @@ > #define OMAP4_MON_L2X0_CTRL_INDEX 0x102 > #define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109 > #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113 > +#define OMAP5_MON_CACHES_CLEAN_INDEX 0x103 > > #define OMAP5_MON_AMBA_IF_INDEX 0x108 > > diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h > index 6822d0a..ee8215b 100644 > --- a/arch/arm/mach-omap2/omap4-sar-layout.h > +++ b/arch/arm/mach-omap2/omap4-sar-layout.h > @@ -31,6 +31,8 @@ > /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ > #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 > #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 > +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00 > +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04 > > #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) > #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) > diff --git a/arch/arm/mach-omap2/sleep_omap4plus.S b/arch/arm/mach-omap2/sleep_omap4plus.S > index 88ff83a..3322fc8 100644 > --- a/arch/arm/mach-omap2/sleep_omap4plus.S > +++ b/arch/arm/mach-omap2/sleep_omap4plus.S > @@ -326,6 +326,86 @@ skip_l2en: > > b cpu_resume @ Jump to generic resume > ENDPROC(omap4_cpu_resume) > + > +/* > + * ================================ > + * == OMAP5 CPU suspend finisher == > + * ================================ > + * > + * OMAP5 MPUSS states for the context save: > + * save_state = > + * 0 - Nothing lost and no need to save: MPUSS INA/CSWR > + * 1 - CPUx L1 and logic lost: CPU OFF, MPUSS INA/CSWR > + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR > + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF > + */ > +ENTRY(omap5_finish_suspend) > + stmfd sp!, {r4-r12, lr} > + cmp r0, #0x0 > + beq do_wfi @ No lowpower state, jump to WFI > + > + /* > + * Flush all data from the L1 data cache before disabling > + * SCTLR.C bit. > + */ > + bl omap4_get_sar_ram_base > + ldr r9, [r0, #OMAP_TYPE_OFFSET] > + cmp r9, #0x1 @ Check for HS device > + bne skip_secure_l1_clean_op > + mov r0, #0 @ Clean secure L1 > + stmfd r13!, {r4-r12, r14} > + ldr r12, =OMAP5_MON_CACHES_CLEAN_INDEX > + DO_SMC > + ldmfd r13!, {r4-r12, r14} > +skip_secure_l1_clean_op: > + bl v7_flush_dcache_louis > + > + /* > + * Clear the SCTLR.C bit to prevent further data cache > + * allocation. Clearing SCTLR.C would make all the data accesses > + * strongly ordered and would not hit the cache. > + */ > + mrc p15, 0, r0, c1, c0, 0 > + bic r0, r0, #(1 << 2) @ Disable the C bit > + mcr p15, 0, r0, c1, c0, 0 > + isb > + > + /* Clean and Invalidate L1 data cache. */ > + bl v7_flush_dcache_louis Curious question - once we have flushed and invalidated L1 on skip_secure_l1_clean_op:, we disable SCTLR.C to make all accesses SO, what is the need to go through clean and invalidate again? is'nt it an un-necessary cycle consuming NOP? What kind of data are we cleaning out here? > + > + /* > + * Take CPU out of Symmetric Multiprocessing (SMP) mode and thus > + * preventing the CPU from receiving cache, TLB, or BTB > + * maintenance operations broadcast by other CPUs in the cluster. > + */ > + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data > + tst r0, #(1 << 18) > + mrcne p15, 0, r0, c1, c0, 1 > + bicne r0, r0, #(1 << 6) @ Disable SMP bit > + mcrne p15, 0, r0, c1, c0, 1 > + isb > + dsb > + when save_state=3, as per the function comment: 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF But we dont flush L2 nonsecure OR secure at this point. results wont be pretty. If we dont want to deal with "3", then should'nt we add an adequate handler on entry and remove the code comment claiming we support it? is'nt it better to squash in "[PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support" here? > +do_wfi: > + bl omap_do_wfi > + > + /* > + * CPU is here when it failed to enter OFF/DORMANT or > + * no low power state was attempted. This might need a bit more clarity IMHO. successful WFI (which is arguably an power state if we consider ARM internal clock gating takes place), will reach here as well. So would OMAP CPU INA state. The comment is probably valid for the defined save_states in code comments for CPU OFF which is un-successful. > + */ > + mrc p15, 0, r0, c1, c0, 0 > + tst r0, #(1 << 2) @ Check C bit enabled? > + orreq r0, r0, #(1 << 2) @ Enable the C bit > + mcreq p15, 0, r0, c1, c0, 0 > + isb > + mrc p15, 0, r0, c1, c0, 1 > + tst r0, #(1 << 6) @ Check SMP bit enabled? > + orreq r0, r0, #(1 << 6) > + mcreq p15, 0, r0, c1, c0, 1 > + isb > + dsb > + ldmfd sp!, {r4-r12, pc} > +ENDPROC(omap5_finish_suspend) > #endif > > #ifndef CONFIG_OMAP4_ERRATA_I688 I was curious at this point -> given that we added documentation that we will be able to go to CPU OFF here, but I did not see an resume handler registered. Untill I looked down in the series to see: [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support Might be better to squash things up? or maybe remove the "documentation"? for example: patch 10 introduces OSWR support, but part of the required support for it is suspend code - which is introduced here! There is no point IMHO introducing code to enter OFF mode in one patch and exit off mode in another patch - just my 2 cents. if we wanted to organize it as per feature, then maybe: patch 9 supports just WFI. patch 10 brings in additional suspend and resume handler for OSWR, patch 11 for device OFF, in each stage adding documentation for save_state - so that it is appropriate and in context.
On Saturday 02 March 2013 03:06 AM, Nishanth Menon wrote: > On 17:40-20130301, Santosh Shilimkar wrote: >> Add power management code to handle the CPU off mode. Separate >> suspend finisher is used for OMAP5(Cortex-A15) because it doesn't >> use SCU power status register and external PL310 L2 cache which makes >> code flow bit different. >> >> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >> --- >> arch/arm/mach-omap2/omap-mpuss-lowpower.c | 31 +++++++---- >> arch/arm/mach-omap2/omap-secure.h | 1 + >> arch/arm/mach-omap2/omap4-sar-layout.h | 2 + >> arch/arm/mach-omap2/sleep_omap4plus.S | 80 +++++++++++++++++++++++++++++ >> 4 files changed, 104 insertions(+), 10 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c >> index 9fda96b..275f9a4 100644 >> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c >> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c >> @@ -76,10 +76,12 @@ struct cpu_pm_ops { >> int (*finish_suspend)(unsigned long cpu_state); >> void (*resume)(void); >> void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); >> + void (*hotplug_restart)(void); >> }; >> >> extern int omap4_finish_suspend(unsigned long cpu_state); >> extern void omap4_cpu_resume(void); >> +extern int omap5_finish_suspend(unsigned long cpu_state); >> >> static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); >> static struct powerdomain *mpuss_pd; >> @@ -102,6 +104,7 @@ struct cpu_pm_ops omap_pm_ops = { >> .finish_suspend = default_finish_suspend, >> .resume = dummy_cpu_resume, >> .scu_prepare = dummy_scu_prepare, >> + .hotplug_restart = dummy_cpu_resume, >> }; >> >> /* >> @@ -334,7 +337,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) >> int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) >> { >> unsigned int cpu_state = 0; >> - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); >> >> if (omap_rev() == OMAP4430_REV_ES1_0) >> return -ENXIO; >> @@ -344,7 +346,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) >> >> clear_cpu_prev_pwrst(cpu); >> set_cpu_next_pwrst(cpu, power_state); >> - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); >> + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart)); >> omap_pm_ops.scu_prepare(cpu, power_state); >> >> /* >> @@ -379,6 +381,7 @@ static void enable_mercury_retention_mode(void) >> int __init omap4_mpuss_init(void) >> { >> struct omap4_cpu_pm_info *pm_info; >> + u32 cpu_wakeup_addr = 0; >> >> if (omap_rev() == OMAP4430_REV_ES1_0) { >> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); >> @@ -388,9 +391,13 @@ int __init omap4_mpuss_init(void) >> sar_base = omap4_get_sar_ram_base(); >> >> /* Initilaise per CPU PM information */ >> + if (cpu_is_omap44xx()) >> + cpu_wakeup_addr = CPU0_WAKEUP_NS_PA_ADDR_OFFSET; >> + else if (soc_is_omap54xx()) >> + cpu_wakeup_addr = OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET; >> pm_info = &per_cpu(omap4_pm_info, 0x0); >> pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; >> - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; >> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; >> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; >> pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); >> if (!pm_info->pwrdm) { >> @@ -405,14 +412,14 @@ int __init omap4_mpuss_init(void) >> /* Initialise CPU0 power domain state to ON */ >> pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); >> >> + if (cpu_is_omap44xx()) >> + cpu_wakeup_addr = CPU1_WAKEUP_NS_PA_ADDR_OFFSET; >> + else if (soc_is_omap54xx()) >> + cpu_wakeup_addr = OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; >> pm_info = &per_cpu(omap4_pm_info, 0x1); >> pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; >> - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; >> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; >> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; >> - if (cpu_is_omap446x()) >> - pm_info->secondary_startup = omap_secondary_startup_4460; >> - else >> - pm_info->secondary_startup = omap_secondary_startup; >> >> pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); >> if (!pm_info->pwrdm) { >> @@ -445,15 +452,19 @@ int __init omap4_mpuss_init(void) >> >> if (cpu_is_omap44xx()) { >> omap_pm_ops.finish_suspend = omap4_finish_suspend; >> + omap_pm_ops.hotplug_restart = omap_secondary_startup; > could we handle omap_pm_ops.hotplug_restart = omap_secondary_startup_4460 > here as well with the interest of keeping all function inits > in consecutive source location? I don't wanted to have multiple indentation and 4460 bug is just too annoying that it is better to keep it seperate. >> diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h >> index 6822d0a..ee8215b 100644 >> --- a/arch/arm/mach-omap2/omap4-sar-layout.h >> +++ b/arch/arm/mach-omap2/omap4-sar-layout.h >> @@ -31,6 +31,8 @@ >> /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ >> #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 >> #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 >> +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00 >> +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04 >> >> #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) >> #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) >> diff --git a/arch/arm/mach-omap2/sleep_omap4plus.S b/arch/arm/mach-omap2/sleep_omap4plus.S >> index 88ff83a..3322fc8 100644 >> --- a/arch/arm/mach-omap2/sleep_omap4plus.S >> +++ b/arch/arm/mach-omap2/sleep_omap4plus.S >> @@ -326,6 +326,86 @@ skip_l2en: >> >> b cpu_resume @ Jump to generic resume >> ENDPROC(omap4_cpu_resume) >> + >> +/* >> + * ================================ >> + * == OMAP5 CPU suspend finisher == >> + * ================================ >> + * >> + * OMAP5 MPUSS states for the context save: >> + * save_state = >> + * 0 - Nothing lost and no need to save: MPUSS INA/CSWR >> + * 1 - CPUx L1 and logic lost: CPU OFF, MPUSS INA/CSWR >> + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR >> + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF >> + */ >> +ENTRY(omap5_finish_suspend) >> + stmfd sp!, {r4-r12, lr} >> + cmp r0, #0x0 >> + beq do_wfi @ No lowpower state, jump to WFI >> + >> + /* >> + * Flush all data from the L1 data cache before disabling >> + * SCTLR.C bit. >> + */ >> + bl omap4_get_sar_ram_base >> + ldr r9, [r0, #OMAP_TYPE_OFFSET] >> + cmp r9, #0x1 @ Check for HS device >> + bne skip_secure_l1_clean_op >> + mov r0, #0 @ Clean secure L1 >> + stmfd r13!, {r4-r12, r14} >> + ldr r12, =OMAP5_MON_CACHES_CLEAN_INDEX >> + DO_SMC >> + ldmfd r13!, {r4-r12, r14} >> +skip_secure_l1_clean_op: >> + bl v7_flush_dcache_louis >> + >> + /* >> + * Clear the SCTLR.C bit to prevent further data cache >> + * allocation. Clearing SCTLR.C would make all the data accesses >> + * strongly ordered and would not hit the cache. >> + */ >> + mrc p15, 0, r0, c1, c0, 0 >> + bic r0, r0, #(1 << 2) @ Disable the C bit >> + mcr p15, 0, r0, c1, c0, 0 >> + isb >> + >> + /* Clean and Invalidate L1 data cache. */ >> + bl v7_flush_dcache_louis > Curious question - once we have flushed and invalidated L1 on > skip_secure_l1_clean_op:, we disable SCTLR.C to make all accesses SO, > what is the need to go through clean and invalidate again? is'nt it an > un-necessary cycle consuming NOP? What kind of data are we cleaning out > here? Obviously you haven't read all the old emails internally as well as externally on this topic. Its needed. >> + >> + /* >> + * Take CPU out of Symmetric Multiprocessing (SMP) mode and thus >> + * preventing the CPU from receiving cache, TLB, or BTB >> + * maintenance operations broadcast by other CPUs in the cluster. >> + */ >> + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data >> + tst r0, #(1 << 18) >> + mrcne p15, 0, r0, c1, c0, 1 >> + bicne r0, r0, #(1 << 6) @ Disable SMP bit >> + mcrne p15, 0, r0, c1, c0, 1 >> + isb >> + dsb >> + > when save_state=3, as per the function comment: > 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF > But we dont flush L2 nonsecure OR secure at this point. results wont be > pretty. Subject adds CPU off support only. I have added the comments section in this patch. I can move that for next patch. > If we dont want to deal with "3", then should'nt we add an adequate > handler on entry and remove the code comment claiming we support > it? > is'nt it better to squash in "[PATCH 11/15] ARM: OMAP5: PM: Add L2 > memory power down support" here? Why. You don't need L2 support for CPU OFF. As I said I will move the comment in further patch which seems to confused you. And sure, I will remove that device OFF reference but still support mode where L2 can be destroyed. It can be done in MPU OSWR as well with a setting to loose L2. >> +do_wfi: >> + bl omap_do_wfi >> + >> + /* >> + * CPU is here when it failed to enter OFF/DORMANT or >> + * no low power state was attempted. > This might need a bit more clarity IMHO. successful WFI (which is > arguably an power state if we consider ARM internal clock gating takes > place), will reach here as well. So would OMAP CPU INA state. The > comment is probably valid for the defined save_states in code comments > for CPU OFF which is un-successful. >> + */ >> + mrc p15, 0, r0, c1, c0, 0 >> + tst r0, #(1 << 2) @ Check C bit enabled? >> + orreq r0, r0, #(1 << 2) @ Enable the C bit >> + mcreq p15, 0, r0, c1, c0, 0 >> + isb >> + mrc p15, 0, r0, c1, c0, 1 >> + tst r0, #(1 << 6) @ Check SMP bit enabled? >> + orreq r0, r0, #(1 << 6) >> + mcreq p15, 0, r0, c1, c0, 1 >> + isb >> + dsb >> + ldmfd sp!, {r4-r12, pc} >> +ENDPROC(omap5_finish_suspend) >> #endif >> >> #ifndef CONFIG_OMAP4_ERRATA_I688 > > I was curious at this point -> given that we added documentation that > we will be able to go to CPU OFF here, but I did not see an resume > handler registered. Untill I looked down in the series to see: > I should have mentioned abou CPU OFF in hotplug path which doesn't need resume entry. Will update commit message accordingly. Thanks for comments. regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11:44-20130302, Santosh Shilimkar wrote: > On Saturday 02 March 2013 03:06 AM, Nishanth Menon wrote: > > On 17:40-20130301, Santosh Shilimkar wrote: > >> Add power management code to handle the CPU off mode. Separate > >> suspend finisher is used for OMAP5(Cortex-A15) because it doesn't > >> use SCU power status register and external PL310 L2 cache which makes > >> code flow bit different. > >> > >> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > >> --- > >> arch/arm/mach-omap2/omap-mpuss-lowpower.c | 31 +++++++---- > >> arch/arm/mach-omap2/omap-secure.h | 1 + > >> arch/arm/mach-omap2/omap4-sar-layout.h | 2 + > >> arch/arm/mach-omap2/sleep_omap4plus.S | 80 +++++++++++++++++++++++++++++ > >> 4 files changed, 104 insertions(+), 10 deletions(-) > >> > >> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > >> index 9fda96b..275f9a4 100644 > >> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > >> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > >> @@ -76,10 +76,12 @@ struct cpu_pm_ops { > >> int (*finish_suspend)(unsigned long cpu_state); > >> void (*resume)(void); > >> void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); > >> + void (*hotplug_restart)(void); > >> }; > >> > >> extern int omap4_finish_suspend(unsigned long cpu_state); > >> extern void omap4_cpu_resume(void); > >> +extern int omap5_finish_suspend(unsigned long cpu_state); > >> > >> static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); > >> static struct powerdomain *mpuss_pd; > >> @@ -102,6 +104,7 @@ struct cpu_pm_ops omap_pm_ops = { > >> .finish_suspend = default_finish_suspend, > >> .resume = dummy_cpu_resume, > >> .scu_prepare = dummy_scu_prepare, > >> + .hotplug_restart = dummy_cpu_resume, > >> }; > >> > >> /* > >> @@ -334,7 +337,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) > >> int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) > >> { > >> unsigned int cpu_state = 0; > >> - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); > >> > >> if (omap_rev() == OMAP4430_REV_ES1_0) > >> return -ENXIO; > >> @@ -344,7 +346,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) > >> > >> clear_cpu_prev_pwrst(cpu); > >> set_cpu_next_pwrst(cpu, power_state); > >> - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); > >> + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart)); > >> omap_pm_ops.scu_prepare(cpu, power_state); > >> > >> /* > >> @@ -379,6 +381,7 @@ static void enable_mercury_retention_mode(void) > >> int __init omap4_mpuss_init(void) > >> { > >> struct omap4_cpu_pm_info *pm_info; > >> + u32 cpu_wakeup_addr = 0; > >> > >> if (omap_rev() == OMAP4430_REV_ES1_0) { > >> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > >> @@ -388,9 +391,13 @@ int __init omap4_mpuss_init(void) > >> sar_base = omap4_get_sar_ram_base(); > >> > >> /* Initilaise per CPU PM information */ > >> + if (cpu_is_omap44xx()) > >> + cpu_wakeup_addr = CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > >> + else if (soc_is_omap54xx()) > >> + cpu_wakeup_addr = OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > >> pm_info = &per_cpu(omap4_pm_info, 0x0); > >> pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; > >> - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; > >> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; > >> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; > >> pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); > >> if (!pm_info->pwrdm) { > >> @@ -405,14 +412,14 @@ int __init omap4_mpuss_init(void) > >> /* Initialise CPU0 power domain state to ON */ > >> pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); > >> > >> + if (cpu_is_omap44xx()) > >> + cpu_wakeup_addr = CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > >> + else if (soc_is_omap54xx()) > >> + cpu_wakeup_addr = OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > >> pm_info = &per_cpu(omap4_pm_info, 0x1); > >> pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; > >> - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; > >> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; > >> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; > >> - if (cpu_is_omap446x()) > >> - pm_info->secondary_startup = omap_secondary_startup_4460; > >> - else > >> - pm_info->secondary_startup = omap_secondary_startup; > >> > >> pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); > >> if (!pm_info->pwrdm) { > >> @@ -445,15 +452,19 @@ int __init omap4_mpuss_init(void) > >> > >> if (cpu_is_omap44xx()) { > >> omap_pm_ops.finish_suspend = omap4_finish_suspend; > >> + omap_pm_ops.hotplug_restart = omap_secondary_startup; > > could we handle omap_pm_ops.hotplug_restart = omap_secondary_startup_4460 > > here as well with the interest of keeping all function inits > > in consecutive source location? > I don't wanted to have multiple indentation and 4460 bug is just > too annoying that it is better to keep it seperate. ok > > > >> diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h > >> index 6822d0a..ee8215b 100644 > >> --- a/arch/arm/mach-omap2/omap4-sar-layout.h > >> +++ b/arch/arm/mach-omap2/omap4-sar-layout.h > >> @@ -31,6 +31,8 @@ > >> /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ > >> #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 > >> #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 > >> +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00 > >> +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04 > >> > >> #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) > >> #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) > >> diff --git a/arch/arm/mach-omap2/sleep_omap4plus.S b/arch/arm/mach-omap2/sleep_omap4plus.S > >> index 88ff83a..3322fc8 100644 > >> --- a/arch/arm/mach-omap2/sleep_omap4plus.S > >> +++ b/arch/arm/mach-omap2/sleep_omap4plus.S > >> @@ -326,6 +326,86 @@ skip_l2en: > >> > >> b cpu_resume @ Jump to generic resume > >> ENDPROC(omap4_cpu_resume) > >> + > >> +/* > >> + * ================================ > >> + * == OMAP5 CPU suspend finisher == > >> + * ================================ > >> + * > >> + * OMAP5 MPUSS states for the context save: > >> + * save_state = > >> + * 0 - Nothing lost and no need to save: MPUSS INA/CSWR > >> + * 1 - CPUx L1 and logic lost: CPU OFF, MPUSS INA/CSWR > >> + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR > >> + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF > >> + */ > >> +ENTRY(omap5_finish_suspend) > >> + stmfd sp!, {r4-r12, lr} > >> + cmp r0, #0x0 > >> + beq do_wfi @ No lowpower state, jump to WFI > >> + > >> + /* > >> + * Flush all data from the L1 data cache before disabling > >> + * SCTLR.C bit. > >> + */ > >> + bl omap4_get_sar_ram_base > >> + ldr r9, [r0, #OMAP_TYPE_OFFSET] > >> + cmp r9, #0x1 @ Check for HS device > >> + bne skip_secure_l1_clean_op > >> + mov r0, #0 @ Clean secure L1 > >> + stmfd r13!, {r4-r12, r14} > >> + ldr r12, =OMAP5_MON_CACHES_CLEAN_INDEX > >> + DO_SMC > >> + ldmfd r13!, {r4-r12, r14} > >> +skip_secure_l1_clean_op: > >> + bl v7_flush_dcache_louis > >> + > >> + /* > >> + * Clear the SCTLR.C bit to prevent further data cache > >> + * allocation. Clearing SCTLR.C would make all the data accesses > >> + * strongly ordered and would not hit the cache. > >> + */ > >> + mrc p15, 0, r0, c1, c0, 0 > >> + bic r0, r0, #(1 << 2) @ Disable the C bit > >> + mcr p15, 0, r0, c1, c0, 0 > >> + isb > >> + > >> + /* Clean and Invalidate L1 data cache. */ > >> + bl v7_flush_dcache_louis > > Curious question - once we have flushed and invalidated L1 on > > skip_secure_l1_clean_op:, we disable SCTLR.C to make all accesses SO, > > what is the need to go through clean and invalidate again? is'nt it an > > un-necessary cycle consuming NOP? What kind of data are we cleaning out > > here? > Obviously you haven't read all the old emails internally as well as > externally on this topic. Its needed. OK. Might be good to briefly document the same in code comments. > > >> + > >> + /* > >> + * Take CPU out of Symmetric Multiprocessing (SMP) mode and thus > >> + * preventing the CPU from receiving cache, TLB, or BTB > >> + * maintenance operations broadcast by other CPUs in the cluster. > >> + */ > >> + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data > >> + tst r0, #(1 << 18) > >> + mrcne p15, 0, r0, c1, c0, 1 > >> + bicne r0, r0, #(1 << 6) @ Disable SMP bit > >> + mcrne p15, 0, r0, c1, c0, 1 > >> + isb > >> + dsb > >> + > > when save_state=3, as per the function comment: > > 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF > > But we dont flush L2 nonsecure OR secure at this point. results wont be > > pretty. > Subject adds CPU off support only. I have added the comments section in > this patch. I can move that for next patch. Thanks - it will be good NOT to have DEVICE OFF mentioned here. > > > If we dont want to deal with "3", then should'nt we add an adequate > > handler on entry and remove the code comment claiming we support > > it? > > is'nt it better to squash in "[PATCH 11/15] ARM: OMAP5: PM: Add L2 > > memory power down support" here? > Why. You don't need L2 support for CPU OFF. As I said I will move the > comment in further patch which seems to confused you. And sure, I will > remove that device OFF reference but still support mode where L2 > can be destroyed. It can be done in MPU OSWR as well with a setting > to loose L2. yep - the DEVICE OFF documentation threw me off I suppose. > > >> +do_wfi: > >> + bl omap_do_wfi > >> + > >> + /* > >> + * CPU is here when it failed to enter OFF/DORMANT or > >> + * no low power state was attempted. > > This might need a bit more clarity IMHO. successful WFI (which is > > arguably an power state if we consider ARM internal clock gating takes > > place), will reach here as well. So would OMAP CPU INA state. The > > comment is probably valid for the defined save_states in code comments > > for CPU OFF which is un-successful. > >> + */ > >> + mrc p15, 0, r0, c1, c0, 0 > >> + tst r0, #(1 << 2) @ Check C bit enabled? > >> + orreq r0, r0, #(1 << 2) @ Enable the C bit > >> + mcreq p15, 0, r0, c1, c0, 0 > >> + isb > >> + mrc p15, 0, r0, c1, c0, 1 > >> + tst r0, #(1 << 6) @ Check SMP bit enabled? > >> + orreq r0, r0, #(1 << 6) > >> + mcreq p15, 0, r0, c1, c0, 1 > >> + isb > >> + dsb > >> + ldmfd sp!, {r4-r12, pc} > >> +ENDPROC(omap5_finish_suspend) > >> #endif > >> > >> #ifndef CONFIG_OMAP4_ERRATA_I688 > > > > I was curious at this point -> given that we added documentation that > > we will be able to go to CPU OFF here, but I did not see an resume > > handler registered. Untill I looked down in the series to see: > > > I should have mentioned abou CPU OFF in hotplug path which doesn't > need resume entry. Will update commit message accordingly. Thanks > for comments. Thanks.
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 9fda96b..275f9a4 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -76,10 +76,12 @@ struct cpu_pm_ops { int (*finish_suspend)(unsigned long cpu_state); void (*resume)(void); void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); + void (*hotplug_restart)(void); }; extern int omap4_finish_suspend(unsigned long cpu_state); extern void omap4_cpu_resume(void); +extern int omap5_finish_suspend(unsigned long cpu_state); static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); static struct powerdomain *mpuss_pd; @@ -102,6 +104,7 @@ struct cpu_pm_ops omap_pm_ops = { .finish_suspend = default_finish_suspend, .resume = dummy_cpu_resume, .scu_prepare = dummy_scu_prepare, + .hotplug_restart = dummy_cpu_resume, }; /* @@ -334,7 +337,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -344,7 +346,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) clear_cpu_prev_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart)); omap_pm_ops.scu_prepare(cpu, power_state); /* @@ -379,6 +381,7 @@ static void enable_mercury_retention_mode(void) int __init omap4_mpuss_init(void) { struct omap4_cpu_pm_info *pm_info; + u32 cpu_wakeup_addr = 0; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -388,9 +391,13 @@ int __init omap4_mpuss_init(void) sar_base = omap4_get_sar_ram_base(); /* Initilaise per CPU PM information */ + if (cpu_is_omap44xx()) + cpu_wakeup_addr = CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + else if (soc_is_omap54xx()) + cpu_wakeup_addr = OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET; pm_info = &per_cpu(omap4_pm_info, 0x0); pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); if (!pm_info->pwrdm) { @@ -405,14 +412,14 @@ int __init omap4_mpuss_init(void) /* Initialise CPU0 power domain state to ON */ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); + if (cpu_is_omap44xx()) + cpu_wakeup_addr = CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + else if (soc_is_omap54xx()) + cpu_wakeup_addr = OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info = &per_cpu(omap4_pm_info, 0x1); pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; - if (cpu_is_omap446x()) - pm_info->secondary_startup = omap_secondary_startup_4460; - else - pm_info->secondary_startup = omap_secondary_startup; pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { @@ -445,15 +452,19 @@ int __init omap4_mpuss_init(void) if (cpu_is_omap44xx()) { omap_pm_ops.finish_suspend = omap4_finish_suspend; + omap_pm_ops.hotplug_restart = omap_secondary_startup; omap_pm_ops.resume = omap4_cpu_resume; omap_pm_ops.scu_prepare = scu_pwrst_prepare; cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET; } else if (soc_is_omap54xx()) { + omap_pm_ops.finish_suspend = omap5_finish_suspend; + omap_pm_ops.hotplug_restart = omap5_secondary_startup; cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET; + enable_mercury_retention_mode(); } - if (soc_is_omap54xx()) - enable_mercury_retention_mode(); + if (cpu_is_omap446x()) + omap_pm_ops.hotplug_restart = omap_secondary_startup_4460; return 0; } diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 82b3c4c..6f4dbee 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -41,6 +41,7 @@ #define OMAP4_MON_L2X0_CTRL_INDEX 0x102 #define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109 #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113 +#define OMAP5_MON_CACHES_CLEAN_INDEX 0x103 #define OMAP5_MON_AMBA_IF_INDEX 0x108 diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index 6822d0a..ee8215b 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -31,6 +31,8 @@ /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00 +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04 #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) diff --git a/arch/arm/mach-omap2/sleep_omap4plus.S b/arch/arm/mach-omap2/sleep_omap4plus.S index 88ff83a..3322fc8 100644 --- a/arch/arm/mach-omap2/sleep_omap4plus.S +++ b/arch/arm/mach-omap2/sleep_omap4plus.S @@ -326,6 +326,86 @@ skip_l2en: b cpu_resume @ Jump to generic resume ENDPROC(omap4_cpu_resume) + +/* + * ================================ + * == OMAP5 CPU suspend finisher == + * ================================ + * + * OMAP5 MPUSS states for the context save: + * save_state = + * 0 - Nothing lost and no need to save: MPUSS INA/CSWR + * 1 - CPUx L1 and logic lost: CPU OFF, MPUSS INA/CSWR + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF + */ +ENTRY(omap5_finish_suspend) + stmfd sp!, {r4-r12, lr} + cmp r0, #0x0 + beq do_wfi @ No lowpower state, jump to WFI + + /* + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. + */ + bl omap4_get_sar_ram_base + ldr r9, [r0, #OMAP_TYPE_OFFSET] + cmp r9, #0x1 @ Check for HS device + bne skip_secure_l1_clean_op + mov r0, #0 @ Clean secure L1 + stmfd r13!, {r4-r12, r14} + ldr r12, =OMAP5_MON_CACHES_CLEAN_INDEX + DO_SMC + ldmfd r13!, {r4-r12, r14} +skip_secure_l1_clean_op: + bl v7_flush_dcache_louis + + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + /* Clean and Invalidate L1 data cache. */ + bl v7_flush_dcache_louis + + /* + * Take CPU out of Symmetric Multiprocessing (SMP) mode and thus + * preventing the CPU from receiving cache, TLB, or BTB + * maintenance operations broadcast by other CPUs in the cluster. + */ + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data + tst r0, #(1 << 18) + mrcne p15, 0, r0, c1, c0, 1 + bicne r0, r0, #(1 << 6) @ Disable SMP bit + mcrne p15, 0, r0, c1, c0, 1 + isb + dsb + +do_wfi: + bl omap_do_wfi + + /* + * CPU is here when it failed to enter OFF/DORMANT or + * no low power state was attempted. + */ + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit + mcreq p15, 0, r0, c1, c0, 0 + isb + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ Check SMP bit enabled? + orreq r0, r0, #(1 << 6) + mcreq p15, 0, r0, c1, c0, 1 + isb + dsb + ldmfd sp!, {r4-r12, pc} +ENDPROC(omap5_finish_suspend) #endif #ifndef CONFIG_OMAP4_ERRATA_I688
Add power management code to handle the CPU off mode. Separate suspend finisher is used for OMAP5(Cortex-A15) because it doesn't use SCU power status register and external PL310 L2 cache which makes code flow bit different. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 31 +++++++---- arch/arm/mach-omap2/omap-secure.h | 1 + arch/arm/mach-omap2/omap4-sar-layout.h | 2 + arch/arm/mach-omap2/sleep_omap4plus.S | 80 +++++++++++++++++++++++++++++ 4 files changed, 104 insertions(+), 10 deletions(-)