| Message ID | 1362493070-17706-4-git-send-email-archit@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 5, 2013 at 9:17 AM, Archit Taneja <archit@ti.com> wrote: > The omapdrm driver requires omapdss panel drivers to expose ops like detect, > set_timings and check_timings. These can be NULL for fixed panel DPI, DBI, DSI > and SDI drivers. At some places, there are no checks to see if the panel driver > has these ops or not, and that leads to a crash. > > The following things are done to make fixed panels work: > > - The omap_connector's detect function is modified such that it considers panel > types which are generally fixed panels as always connected(provided the panel > driver doesn't have a detect op). Hence, the connector corresponding to these > panels is always in a 'connected' state. > > - If a panel driver doesn't have a check_timings op, assume that it supports the > mode passed to omap_connector_mode_valid(the 'mode_valid' drm helper function) > > - The function omap_encoder_update shouldn't really do anything for fixed > resolution panels, make sure that it calls set_timings only if the panel > driver has one. > > Signed-off-by: Archit Taneja <archit@ti.com> > --- > drivers/gpu/drm/omapdrm/omap_connector.c | 10 ++++++++-- > drivers/gpu/drm/omapdrm/omap_encoder.c | 6 ++++-- > 2 files changed, 12 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c > index c451c41..c952324 100644 > --- a/drivers/gpu/drm/omapdrm/omap_connector.c > +++ b/drivers/gpu/drm/omapdrm/omap_connector.c > @@ -110,6 +110,11 @@ static enum drm_connector_status omap_connector_detect( > ret = connector_status_connected; > else > ret = connector_status_disconnected; > + } else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI || > + dssdev->type == OMAP_DISPLAY_TYPE_DBI || > + dssdev->type == OMAP_DISPLAY_TYPE_SDI || > + dssdev->type == OMAP_DISPLAY_TYPE_DSI) { > + ret = connector_status_connected; > } else { > ret = connector_status_unknown; > } > @@ -189,12 +194,13 @@ static int omap_connector_mode_valid(struct drm_connector *connector, > struct omap_video_timings timings = {0}; > struct drm_device *dev = connector->dev; > struct drm_display_mode *new_mode; > - int ret = MODE_BAD; > + int r, ret = MODE_BAD; > > copy_timings_drm_to_omap(&timings, mode); > mode->vrefresh = drm_mode_vrefresh(mode); > > - if (!dssdrv->check_timings(dssdev, &timings)) { > + r = dssdrv->check_timings ? dssdrv->check_timings(dssdev, &timings) : 0; > + if (!r) { > /* check if vrefresh is still valid */ > new_mode = drm_mode_duplicate(dev, mode); > new_mode->clock = timings.pixel_clock; > diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c > index d48df71..9aed178 100644 > --- a/drivers/gpu/drm/omapdrm/omap_encoder.c > +++ b/drivers/gpu/drm/omapdrm/omap_encoder.c > @@ -135,13 +135,15 @@ int omap_encoder_update(struct drm_encoder *encoder, > > dssdev->output->manager = mgr; > > - ret = dssdrv->check_timings(dssdev, timings); > + ret = dssdrv->check_timings ? > + dssdrv->check_timings(dssdev, timings) : 0; > if (ret) { > dev_err(dev->dev, "could not set timings: %d\n", ret); > return ret; > } > > - dssdrv->set_timings(dssdev, timings); > + if (dssdrv->set_timings) > + dssdrv->set_timings(dssdev, timings); maybe either here or _mode_valid(), for panels that don't have set_timings(), we should double check that the new timings match what we get from the panel's get_timings(). Other than that, it looks fine. BR, -R > return 0; > } > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 06 March 2013 06:15 AM, Rob Clark wrote: > On Tue, Mar 5, 2013 at 9:17 AM, Archit Taneja <archit@ti.com> wrote: >> The omapdrm driver requires omapdss panel drivers to expose ops like detect, >> set_timings and check_timings. These can be NULL for fixed panel DPI, DBI, DSI >> and SDI drivers. At some places, there are no checks to see if the panel driver >> has these ops or not, and that leads to a crash. >> >> The following things are done to make fixed panels work: >> >> - The omap_connector's detect function is modified such that it considers panel >> types which are generally fixed panels as always connected(provided the panel >> driver doesn't have a detect op). Hence, the connector corresponding to these >> panels is always in a 'connected' state. >> >> - If a panel driver doesn't have a check_timings op, assume that it supports the >> mode passed to omap_connector_mode_valid(the 'mode_valid' drm helper function) >> >> - The function omap_encoder_update shouldn't really do anything for fixed >> resolution panels, make sure that it calls set_timings only if the panel >> driver has one. >> >> Signed-off-by: Archit Taneja <archit@ti.com> >> --- >> drivers/gpu/drm/omapdrm/omap_connector.c | 10 ++++++++-- >> drivers/gpu/drm/omapdrm/omap_encoder.c | 6 ++++-- >> 2 files changed, 12 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c >> index c451c41..c952324 100644 >> --- a/drivers/gpu/drm/omapdrm/omap_connector.c >> +++ b/drivers/gpu/drm/omapdrm/omap_connector.c >> @@ -110,6 +110,11 @@ static enum drm_connector_status omap_connector_detect( >> ret = connector_status_connected; >> else >> ret = connector_status_disconnected; >> + } else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI || >> + dssdev->type == OMAP_DISPLAY_TYPE_DBI || >> + dssdev->type == OMAP_DISPLAY_TYPE_SDI || >> + dssdev->type == OMAP_DISPLAY_TYPE_DSI) { >> + ret = connector_status_connected; >> } else { >> ret = connector_status_unknown; >> } >> @@ -189,12 +194,13 @@ static int omap_connector_mode_valid(struct drm_connector *connector, >> struct omap_video_timings timings = {0}; >> struct drm_device *dev = connector->dev; >> struct drm_display_mode *new_mode; >> - int ret = MODE_BAD; >> + int r, ret = MODE_BAD; >> >> copy_timings_drm_to_omap(&timings, mode); >> mode->vrefresh = drm_mode_vrefresh(mode); >> >> - if (!dssdrv->check_timings(dssdev, &timings)) { >> + r = dssdrv->check_timings ? dssdrv->check_timings(dssdev, &timings) : 0; >> + if (!r) { >> /* check if vrefresh is still valid */ >> new_mode = drm_mode_duplicate(dev, mode); >> new_mode->clock = timings.pixel_clock; >> diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c >> index d48df71..9aed178 100644 >> --- a/drivers/gpu/drm/omapdrm/omap_encoder.c >> +++ b/drivers/gpu/drm/omapdrm/omap_encoder.c >> @@ -135,13 +135,15 @@ int omap_encoder_update(struct drm_encoder *encoder, >> >> dssdev->output->manager = mgr; >> >> - ret = dssdrv->check_timings(dssdev, timings); >> + ret = dssdrv->check_timings ? >> + dssdrv->check_timings(dssdev, timings) : 0; >> if (ret) { >> dev_err(dev->dev, "could not set timings: %d\n", ret); >> return ret; >> } >> >> - dssdrv->set_timings(dssdev, timings); >> + if (dssdrv->set_timings) >> + dssdrv->set_timings(dssdev, timings); > > maybe either here or _mode_valid(), for panels that don't have > set_timings(), we should double check that the new timings match what > we get from the panel's get_timings(). Other than that, it looks > fine. Yeah, we should do that. I guess it makes more sense to do it earlier, i.e, in mode_vaild. Archit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c index c451c41..c952324 100644 --- a/drivers/gpu/drm/omapdrm/omap_connector.c +++ b/drivers/gpu/drm/omapdrm/omap_connector.c @@ -110,6 +110,11 @@ static enum drm_connector_status omap_connector_detect( ret = connector_status_connected; else ret = connector_status_disconnected; + } else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI || + dssdev->type == OMAP_DISPLAY_TYPE_DBI || + dssdev->type == OMAP_DISPLAY_TYPE_SDI || + dssdev->type == OMAP_DISPLAY_TYPE_DSI) { + ret = connector_status_connected; } else { ret = connector_status_unknown; } @@ -189,12 +194,13 @@ static int omap_connector_mode_valid(struct drm_connector *connector, struct omap_video_timings timings = {0}; struct drm_device *dev = connector->dev; struct drm_display_mode *new_mode; - int ret = MODE_BAD; + int r, ret = MODE_BAD; copy_timings_drm_to_omap(&timings, mode); mode->vrefresh = drm_mode_vrefresh(mode); - if (!dssdrv->check_timings(dssdev, &timings)) { + r = dssdrv->check_timings ? dssdrv->check_timings(dssdev, &timings) : 0; + if (!r) { /* check if vrefresh is still valid */ new_mode = drm_mode_duplicate(dev, mode); new_mode->clock = timings.pixel_clock; diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c index d48df71..9aed178 100644 --- a/drivers/gpu/drm/omapdrm/omap_encoder.c +++ b/drivers/gpu/drm/omapdrm/omap_encoder.c @@ -135,13 +135,15 @@ int omap_encoder_update(struct drm_encoder *encoder, dssdev->output->manager = mgr; - ret = dssdrv->check_timings(dssdev, timings); + ret = dssdrv->check_timings ? + dssdrv->check_timings(dssdev, timings) : 0; if (ret) { dev_err(dev->dev, "could not set timings: %d\n", ret); return ret; } - dssdrv->set_timings(dssdev, timings); + if (dssdrv->set_timings) + dssdrv->set_timings(dssdev, timings); return 0; }
The omapdrm driver requires omapdss panel drivers to expose ops like detect, set_timings and check_timings. These can be NULL for fixed panel DPI, DBI, DSI and SDI drivers. At some places, there are no checks to see if the panel driver has these ops or not, and that leads to a crash. The following things are done to make fixed panels work: - The omap_connector's detect function is modified such that it considers panel types which are generally fixed panels as always connected(provided the panel driver doesn't have a detect op). Hence, the connector corresponding to these panels is always in a 'connected' state. - If a panel driver doesn't have a check_timings op, assume that it supports the mode passed to omap_connector_mode_valid(the 'mode_valid' drm helper function) - The function omap_encoder_update shouldn't really do anything for fixed resolution panels, make sure that it calls set_timings only if the panel driver has one. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/gpu/drm/omapdrm/omap_connector.c | 10 ++++++++-- drivers/gpu/drm/omapdrm/omap_encoder.c | 6 ++++-- 2 files changed, 12 insertions(+), 4 deletions(-)