@@ -303,6 +303,28 @@ exit:
return ret;
}
+static
+int omap_bandgap_add_hyst(struct omap_bandgap *bg_ptr, int adc_val,
+ int hyst_val, u32 *sum)
+{
+ int temp, ret;
+
+ /*
+ * Need to add in the mcelsius domain, so we have a temperature
+ * the conv_table range
+ */
+ ret = omap_bandgap_adc_to_mcelsius(bg_ptr, adc_val, &temp);
+ if (ret < 0)
+ goto exit;
+
+ temp += hyst_val;
+
+ ret = omap_bandgap_mcelsius_to_adc(bg_ptr, temp, sum);
+
+exit:
+ return ret;
+}
+
/* Talert masks. Call it only if HAS(TALERT) is set */
static int temp_sensor_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
u32 t_hot, u32 t_cold)
@@ -330,20 +352,6 @@ static int temp_sensor_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
return 0;
}
-static
-int add_hyst(int adc_val, int hyst_val, struct omap_bandgap *bg_ptr, u32 *sum)
-{
- int temp, ret;
-
- ret = omap_bandgap_adc_to_mcelsius(bg_ptr, adc_val, &temp);
- if (ret < 0)
- return ret;
-
- temp += hyst_val;
-
- return omap_bandgap_mcelsius_to_adc(bg_ptr, temp, sum);
-}
-
/* Talert Thot threshold. Call it only if HAS(TALERT) is set */
static
int temp_sensor_configure_thot(struct omap_bandgap *bg_ptr, int id, int t_hot)
@@ -361,7 +369,8 @@ int temp_sensor_configure_thot(struct omap_bandgap *bg_ptr, int id, int t_hot)
__ffs(tsr->threshold_tcold_mask);
if (t_hot <= cold) {
/* change the t_cold to t_hot - 5000 millidegrees */
- err |= add_hyst(t_hot, -ts_data->hyst_val, bg_ptr, &cold);
+ err |= omap_bandgap_add_hyst(bg_ptr, t_hot,
+ -ts_data->hyst_val, &cold);
/* write the new t_cold value */
reg_val = thresh_val & (~tsr->threshold_tcold_mask);
reg_val |= cold << __ffs(tsr->threshold_tcold_mask);
@@ -399,7 +408,8 @@ int temp_sensor_configure_tcold(struct omap_bandgap *bg_ptr, int id,
if (t_cold >= hot) {
/* change the t_hot to t_cold + 5000 millidegrees */
- err |= add_hyst(t_cold, ts_data->hyst_val, bg_ptr, &hot);
+ err |= omap_bandgap_add_hyst(bg_ptr, t_cold,
+ ts_data->hyst_val, &hot);
/* write the new t_hot value */
reg_val = thresh_val & (~tsr->threshold_thot_mask);
reg_val |= hot << __ffs(tsr->threshold_thot_mask);
This patch improves the add_hyst function by: . Renaming it to omap_bandgap_add_hyst . Moving it to the ADC conversion functions section . Changing its signature to follow the driver standard Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> --- drivers/staging/omap-thermal/omap-bandgap.c | 42 ++++++++++++++++---------- 1 files changed, 26 insertions(+), 16 deletions(-)