| Message ID | 1364205910-32392-4-git-send-email-santosh.shilimkar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Santosh Shilimkar <santosh.shilimkar@ti.com> writes: > OMAP5 has backward compatible PRCM block and it's programming > model is mostly similar to OMAP4. Same is going to be maintained > for future OMAP4 based SOCs. Hence consolidate the OMAP4 power > management code so that it can be re-used on OMAP5 and later devices. > > With consolidated code, let basic power management code build > for OMAP5 devices. While at it, update the kernel-doc for omap4_pm_init(). > > Acked-by: Nishanth Menon <nm@ti.com> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > --- > arch/arm/mach-omap2/Makefile | 9 ++-- > arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} | 54 ++++++++++++++++---- > .../mach-omap2/{sleep44xx.S => sleep_omap4plus.S} | 0 > 3 files changed, 49 insertions(+), 14 deletions(-) > rename arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} (86%) > rename arch/arm/mach-omap2/{sleep44xx.S => sleep_omap4plus.S} (100%) > > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index 5d5ff91..d91ae0f 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -35,14 +35,14 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o > obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o > obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o > omap-4-5-common = omap4-common.o omap-wakeupgen.o \ > - sleep44xx.o > + sleep_omap4plus.o > obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) > obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) > > plus_sec := $(call as-instr,.arch_extension sec,+sec) > AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) > AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) > -AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) > +AFLAGS_sleep_omap4plus.o :=-Wa,-march=armv7-a$(plus_sec) > > # Functions loaded to SRAM > obj-$(CONFIG_SOC_OMAP2420) += sram242x.o > @@ -80,11 +80,12 @@ endif > obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o > > ifeq ($(CONFIG_PM),y) > +omap4plus-common-pm = omap-mpuss-lowpower.o pm_omap4plus.o > obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o > obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o > obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o > -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o > -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o > +obj-$(CONFIG_ARCH_OMAP4) += $(omap4plus-common-pm) > +obj-$(CONFIG_SOC_OMAP5) += $(omap4plus-common-pm) > obj-$(CONFIG_PM_DEBUG) += pm-debug.o > > obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm_omap4plus.c > similarity index 86% > rename from arch/arm/mach-omap2/pm44xx.c > rename to arch/arm/mach-omap2/pm_omap4plus.c > index 5ba6d88..e920c34 100644 > --- a/arch/arm/mach-omap2/pm44xx.c > +++ b/arch/arm/mach-omap2/pm_omap4plus.c > @@ -1,7 +1,7 @@ > /* > - * OMAP4 Power Management Routines > + * OMAP4PLUS Power Management Routines nit: OMAP4+ (you only need to spell out "plus" in the filename. > * > - * Copyright (C) 2010-2011 Texas Instruments, Inc. > + * Copyright (C) 2010-2013 Texas Instruments, Inc. > * Rajendra Nayak <rnayak@ti.com> > * Santosh Shilimkar <santosh.shilimkar@ti.com> > * > @@ -135,16 +135,16 @@ static void omap_default_idle(void) > } > > /** > - * omap4_pm_init - Init routine for OMAP4 PM > + * omap4_init_static_deps - Add OMAP4 static dependencies > * > - * Initializes all powerdomain and clockdomain target states > - * and all PRCM settings. > + * Add needed static clockdomain dependencies on OMAP4 devices. > + * Return: 0 on success or 'err' on failures > */ > -int __init omap4_pm_init(void) > +static inline int omap4_init_static_deps(void) You dropped the __init here, but it's still only called from another __init function, so I suspect it should stay. > { > - int ret; > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; > struct clockdomain *ducati_clkdm, *l3_2_clkdm; > + int ret = 0; > > if (omap_rev() == OMAP4430_REV_ES1_0) { > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > @@ -163,7 +163,7 @@ int __init omap4_pm_init(void) > ret = pwrdm_for_each(pwrdms_setup, NULL); > if (ret) { > pr_err("Failed to setup powerdomains\n"); > - goto err2; > + return ret; > } > > /* > @@ -179,7 +179,7 @@ int __init omap4_pm_init(void) > ducati_clkdm = clkdm_lookup("ducati_clkdm"); > if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || > (!l3_2_clkdm) || (!ducati_clkdm)) > - goto err2; > + return -EINVAL; > ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); > ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); > @@ -188,9 +188,42 @@ int __init omap4_pm_init(void) > ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); > if (ret) { > pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); > + return -EINVAL; > + } > + > + return ret; > +} > + > +/** > + * omap4_pm_init - Init routine for OMAP4+ devices > + * > + * Initializes all powerdomain and clockdomain target states > + * and all PRCM settings. > + * Return: Returns the error code returned by called functions. > + */ > +int __init omap4_pm_init(void) > +{ > + int ret = 0; > + > + if (omap_rev() == OMAP4430_REV_ES1_0) { > + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > + return -ENODEV; > + } > + > + pr_info("Power Management for TI OMAP4PLUS devices.\n"); s/PLUS/+/ Kevin > + > + ret = pwrdm_for_each(pwrdms_setup, NULL); > + if (ret) { > + pr_err("Failed to setup powerdomains.\n"); > goto err2; > } > > + if (cpu_is_omap44xx()) { > + ret = omap4_init_static_deps(); > + if (ret) > + goto err2; > + } > + > ret = omap4_mpuss_init(); > if (ret) { > pr_err("Failed to initialise OMAP4 MPUSS\n"); > @@ -206,7 +239,8 @@ int __init omap4_pm_init(void) > /* Overwrite the default cpu_do_idle() */ > arm_pm_idle = omap_default_idle; > > - omap4_idle_init(); > + if (cpu_is_omap44xx()) > + omap4_idle_init(); > > err2: > return ret; > diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep_omap4plus.S > similarity index 100% > rename from arch/arm/mach-omap2/sleep44xx.S > rename to arch/arm/mach-omap2/sleep_omap4plus.S -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 04 April 2013 01:50 AM, Kevin Hilman wrote: > Santosh Shilimkar <santosh.shilimkar@ti.com> writes: > >> OMAP5 has backward compatible PRCM block and it's programming >> model is mostly similar to OMAP4. Same is going to be maintained >> for future OMAP4 based SOCs. Hence consolidate the OMAP4 power >> management code so that it can be re-used on OMAP5 and later devices. >> >> With consolidated code, let basic power management code build >> for OMAP5 devices. While at it, update the kernel-doc for omap4_pm_init(). >> >> Acked-by: Nishanth Menon <nm@ti.com> >> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >> --- >> arch/arm/mach-omap2/Makefile | 9 ++-- >> arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} | 54 ++++++++++++++++---- >> .../mach-omap2/{sleep44xx.S => sleep_omap4plus.S} | 0 >> 3 files changed, 49 insertions(+), 14 deletions(-) >> rename arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} (86%) >> rename arch/arm/mach-omap2/{sleep44xx.S => sleep_omap4plus.S} (100%) >> [..] >> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm_omap4plus.c >> similarity index 86% >> rename from arch/arm/mach-omap2/pm44xx.c >> rename to arch/arm/mach-omap2/pm_omap4plus.c >> index 5ba6d88..e920c34 100644 >> --- a/arch/arm/mach-omap2/pm44xx.c >> +++ b/arch/arm/mach-omap2/pm_omap4plus.c >> @@ -1,7 +1,7 @@ >> /* >> - * OMAP4 Power Management Routines >> + * OMAP4PLUS Power Management Routines > > nit: OMAP4+ (you only need to spell out "plus" in the filename. > OK. I will replace '+' instead of 'PLUS' in rest of the places. >> * >> - * Copyright (C) 2010-2011 Texas Instruments, Inc. >> + * Copyright (C) 2010-2013 Texas Instruments, Inc. >> * Rajendra Nayak <rnayak@ti.com> >> * Santosh Shilimkar <santosh.shilimkar@ti.com> >> * >> @@ -135,16 +135,16 @@ static void omap_default_idle(void) >> } >> >> /** >> - * omap4_pm_init - Init routine for OMAP4 PM >> + * omap4_init_static_deps - Add OMAP4 static dependencies >> * >> - * Initializes all powerdomain and clockdomain target states >> - * and all PRCM settings. >> + * Add needed static clockdomain dependencies on OMAP4 devices. >> + * Return: 0 on success or 'err' on failures >> */ >> -int __init omap4_pm_init(void) >> +static inline int omap4_init_static_deps(void) > > You dropped the __init here, but it's still only called from another > __init function, so I suspect it should stay. > Yep. Will keep that in next version. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 04 April 2013 05:21 PM, Santosh Shilimkar wrote: > On Thursday 04 April 2013 01:50 AM, Kevin Hilman wrote: >> Santosh Shilimkar <santosh.shilimkar@ti.com> writes: >> >>> OMAP5 has backward compatible PRCM block and it's programming >>> model is mostly similar to OMAP4. Same is going to be maintained >>> for future OMAP4 based SOCs. Hence consolidate the OMAP4 power >>> management code so that it can be re-used on OMAP5 and later devices. >>> >>> With consolidated code, let basic power management code build >>> for OMAP5 devices. While at it, update the kernel-doc for omap4_pm_init(). >>> >>> Acked-by: Nishanth Menon <nm@ti.com> >>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >>> --- >>> arch/arm/mach-omap2/Makefile | 9 ++-- >>> arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} | 54 ++++++++++++++++---- >>> .../mach-omap2/{sleep44xx.S => sleep_omap4plus.S} | 0 >>> 3 files changed, 49 insertions(+), 14 deletions(-) >>> rename arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} (86%) >>> rename arch/arm/mach-omap2/{sleep44xx.S => sleep_omap4plus.S} (100%) >>> > > [..] >>> >>> /** >>> - * omap4_pm_init - Init routine for OMAP4 PM >>> + * omap4_init_static_deps - Add OMAP4 static dependencies >>> * >>> - * Initializes all powerdomain and clockdomain target states >>> - * and all PRCM settings. >>> + * Add needed static clockdomain dependencies on OMAP4 devices. >>> + * Return: 0 on success or 'err' on failures >>> */ >>> -int __init omap4_pm_init(void) >>> +static inline int omap4_init_static_deps(void) >> >> You dropped the __init here, but it's still only called from another >> __init function, so I suspect it should stay. >> > Yep. Will keep that in next version. > I was too quick to respond. The function is "static inline" so there is no need to add __init here. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5d5ff91..d91ae0f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -35,14 +35,14 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o omap-4-5-common = omap4-common.o omap-wakeupgen.o \ - sleep44xx.o + sleep_omap4plus.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec) -AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) +AFLAGS_sleep_omap4plus.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o @@ -80,11 +80,12 @@ endif obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o ifeq ($(CONFIG_PM),y) +omap4plus-common-pm = omap-mpuss-lowpower.o pm_omap4plus.o obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap4plus-common-pm) +obj-$(CONFIG_SOC_OMAP5) += $(omap4plus-common-pm) obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm_omap4plus.c similarity index 86% rename from arch/arm/mach-omap2/pm44xx.c rename to arch/arm/mach-omap2/pm_omap4plus.c index 5ba6d88..e920c34 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm_omap4plus.c @@ -1,7 +1,7 @@ /* - * OMAP4 Power Management Routines + * OMAP4PLUS Power Management Routines * - * Copyright (C) 2010-2011 Texas Instruments, Inc. + * Copyright (C) 2010-2013 Texas Instruments, Inc. * Rajendra Nayak <rnayak@ti.com> * Santosh Shilimkar <santosh.shilimkar@ti.com> * @@ -135,16 +135,16 @@ static void omap_default_idle(void) } /** - * omap4_pm_init - Init routine for OMAP4 PM + * omap4_init_static_deps - Add OMAP4 static dependencies * - * Initializes all powerdomain and clockdomain target states - * and all PRCM settings. + * Add needed static clockdomain dependencies on OMAP4 devices. + * Return: 0 on success or 'err' on failures */ -int __init omap4_pm_init(void) +static inline int omap4_init_static_deps(void) { - int ret; struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; struct clockdomain *ducati_clkdm, *l3_2_clkdm; + int ret = 0; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -163,7 +163,7 @@ int __init omap4_pm_init(void) ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); - goto err2; + return ret; } /* @@ -179,7 +179,7 @@ int __init omap4_pm_init(void) ducati_clkdm = clkdm_lookup("ducati_clkdm"); if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l3_2_clkdm) || (!ducati_clkdm)) - goto err2; + return -EINVAL; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); @@ -188,9 +188,42 @@ int __init omap4_pm_init(void) ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); + return -EINVAL; + } + + return ret; +} + +/** + * omap4_pm_init - Init routine for OMAP4+ devices + * + * Initializes all powerdomain and clockdomain target states + * and all PRCM settings. + * Return: Returns the error code returned by called functions. + */ +int __init omap4_pm_init(void) +{ + int ret = 0; + + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); + return -ENODEV; + } + + pr_info("Power Management for TI OMAP4PLUS devices.\n"); + + ret = pwrdm_for_each(pwrdms_setup, NULL); + if (ret) { + pr_err("Failed to setup powerdomains.\n"); goto err2; } + if (cpu_is_omap44xx()) { + ret = omap4_init_static_deps(); + if (ret) + goto err2; + } + ret = omap4_mpuss_init(); if (ret) { pr_err("Failed to initialise OMAP4 MPUSS\n"); @@ -206,7 +239,8 @@ int __init omap4_pm_init(void) /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; - omap4_idle_init(); + if (cpu_is_omap44xx()) + omap4_idle_init(); err2: return ret;