[04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable

Message ID	1370950268-7224-5-git-send-email-bigeasy@linutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-omap-owner@vger.kernel.org> From: Sebastian Andrzej Siewior <bigeasy@linutronix.de> To: Lee Jones <lee.jones@linaro.org>, Samuel Ortiz <sameo@linux.intel.com> Cc: =?UTF-8?q?Beno=C3=AEt=20Cousson?= <b-cousson@ti.com>, Tony Lindgren <tony@atomide.com>, Jonathan Cameron <jic23@cam.ac.uk>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Felipe Balbi <balbi@ti.com>, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-iio@vger.kernel.org, linux-input@vger.kernel.org, "Patil, Rachna" <rachna@ti.com>, Sebastian Andrzej Siewior <bigeasy@linutronix.de> Subject: [PATCH 04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable Date: Tue, 11 Jun 2013 13:30:50 +0200 Message-Id: <1370950268-7224-5-git-send-email-bigeasy@linutronix.de> In-Reply-To: <1370950268-7224-1-git-send-email-bigeasy@linutronix.de> References: <1370950268-7224-1-git-send-email-bigeasy@linutronix.de> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 23d6a4d..56c6220 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -33,6 +33,13 @@ #define SEQ_SETTLE 275 #define MAX_12BIT ((1 << 12) - 1) +static const int config_pins[] = { + XPP, + XNN, + YPP, + YNN, +}; + struct titsc { struct input_dev *input; struct ti_tscadc_dev *mfd_tscadc; @@ -41,6 +48,9 @@ struct titsc { unsigned int x_plate_resistance; bool pen_down; int steps_to_configure; + u32 config_inp[4]; + u32 bit_xp, bit_xn, bit_yp, bit_yn; + u32 inp_xp, inp_xn, inp_yp, inp_yn; }; static unsigned int titsc_readl(struct titsc *ts, unsigned int reg) @@ -54,6 +64,58 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg, writel(val, tsc->mfd_tscadc->tscadc_base + reg); } +static int titsc_config_wires(struct titsc *ts_dev) +{ + u32 analog_line[4]; + u32 wire_order[4]; + int i, bit_cfg; + + for (i = 0; i < 4; i++) { + /* + * Get the order in which TSC wires are attached + * w.r.t. each of the analog input lines on the EVM. + */ + analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4; + wire_order[i] = ts_dev->config_inp[i] & 0x0F; + if (WARN_ON(analog_line[i] > 7)) + return -EINVAL; + if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins))) + return -EINVAL; + } + + for (i = 0; i < 4; i++) { + int an_line; + int wi_order; + + an_line = analog_line[i]; + wi_order = wire_order[i]; + bit_cfg = config_pins[wi_order]; + if (bit_cfg == 0) + return -EINVAL; + switch (wi_order) { + case 0: + ts_dev->bit_xp = bit_cfg; + ts_dev->inp_xp = an_line; + break; + + case 1: + ts_dev->bit_xn = bit_cfg; + ts_dev->inp_xn = an_line; + break; + + case 2: + ts_dev->bit_yp = bit_cfg; + ts_dev->inp_yp = an_line; + break; + case 3: + ts_dev->bit_yn = bit_cfg; + ts_dev->inp_yn = an_line; + break; + } + } + return 0; +} + static void titsc_step_config(struct titsc *ts_dev) { unsigned int config; @@ -64,18 +126,18 @@ static void titsc_step_config(struct titsc *ts_dev) total_steps = 2 * ts_dev->steps_to_configure; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_XPP; + STEPCONFIG_AVG_16 | ts_dev->bit_xp; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; case 5: - config |= STEPCONFIG_YNN | - STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | - STEPCONFIG_YPP; + config |= ts_dev->bit_yn | + STEPCONFIG_INP_AN4 | ts_dev->bit_xn | + ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; } @@ -86,18 +148,18 @@ static void titsc_step_config(struct titsc *ts_dev) config = 0; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YNN | + STEPCONFIG_AVG_16 | ts_dev->bit_yn | STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; case 5: - config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | - STEPCONFIG_XNP | STEPCONFIG_YPN; + config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 | + ts_dev->bit_xn | ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; } @@ -108,9 +170,9 @@ static void titsc_step_config(struct titsc *ts_dev) config = 0; /* Charge step configuration */ - config = STEPCONFIG_XPP | STEPCONFIG_YNN | + config = ts_dev->bit_xp | ts_dev->bit_yn | STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | - STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; + STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp); titsc_writel(ts_dev, REG_CHARGECONFIG, config); titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); @@ -118,13 +180,14 @@ static void titsc_step_config(struct titsc *ts_dev) config = 0; /* Configure to calculate pressure */ config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YPP | - STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; + STEPCONFIG_AVG_16 | ts_dev->bit_yp | + ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM | + STEPCONFIG_INP(ts_dev->inp_xp); titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), STEPCONFIG_OPENDLY); - config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; + config |= STEPCONFIG_INP(ts_dev->inp_yn) | STEPCONFIG_FIFO1; titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), STEPCONFIG_OPENDLY); @@ -292,6 +355,8 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->wires = pdata->tsc_init->wires; ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; + memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config, + sizeof(pdata->tsc_init->wire_config)); err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -301,6 +366,11 @@ static int titsc_probe(struct platform_device *pdev) } titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); + err = titsc_config_wires(ts_dev); + if (err) { + dev_err(&pdev->dev, "wrong i/p wire configuration\n"); + goto err_free_irq; + } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h index 49269a2..6a66b4d 100644 --- a/include/linux/input/ti_am335x_tsc.h +++ b/include/linux/input/ti_am335x_tsc.h @@ -12,12 +12,24 @@ * A step configured to read a single * co-ordinate value, can be applied * more number of times for better results. + * @wire_config: Different EVM's could have a different order + * for connecting wires on touchscreen. + * We need to provide an 8 bit number where in + * the 1st four bits represent the analog lines + * and the next 4 bits represent positive/ + * negative terminal on that input line. + * Notations to represent the input lines and + * terminals resoectively is as follows: + * AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. + * XP = 0, XN = 1, YP = 2, YN = 3. + * */ struct tsc_data { int wires; int x_plate_resistance; int steps_to_configure; + int wire_config[10]; }; #endif diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index eeead15..2d78af8 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -71,8 +71,6 @@ #define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) #define STEPCONFIG_INP_MASK (0xF << 19) #define STEPCONFIG_INP(val) ((val) << 19) -#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) -#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) #define STEPCONFIG_FIFO1 BIT(26) @@ -94,7 +92,6 @@ #define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) #define STEPCHARGE_INP_MASK (0xF << 19) #define STEPCHARGE_INP(val) ((val) << 19) -#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) #define STEPCHARGE_RFM_MASK (3 << 23) #define STEPCHARGE_RFM(val) ((val) << 23) #define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) @@ -116,6 +113,13 @@ #define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) #define CNTRLREG_TSCENB BIT(7) +#define XPP STEPCONFIG_XPP +#define XNP STEPCONFIG_XNP +#define XNN STEPCONFIG_XNN +#define YPP STEPCONFIG_YPP +#define YPN STEPCONFIG_YPN +#define YNN STEPCONFIG_YNN + #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 #define TOTAL_STEPS 16

[04/22] input/ti_am33x_tsc: Order of TSC wires, made configurable

Commit Message

Comments

Patch