From patchwork Tue Jun 18 17:07:01 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Aaro Koskinen X-Patchwork-Id: 2744301 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 6154A9F8E1 for ; Tue, 18 Jun 2013 17:08:05 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 9CFAF2044E for ; Tue, 18 Jun 2013 17:08:03 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id D85AE20448 for ; Tue, 18 Jun 2013 17:08:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933596Ab3FRRH6 (ORCPT ); Tue, 18 Jun 2013 13:07:58 -0400 Received: from filtteri5.pp.htv.fi ([213.243.153.188]:52182 "EHLO filtteri5.pp.htv.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933590Ab3FRRH4 (ORCPT ); Tue, 18 Jun 2013 13:07:56 -0400 Received: from localhost (localhost [127.0.0.1]) by filtteri5.pp.htv.fi (Postfix) with ESMTP id 23B855A6EF3; Tue, 18 Jun 2013 20:07:55 +0300 (EEST) X-Virus-Scanned: Debian amavisd-new at pp.htv.fi Received: from smtp6.welho.com ([213.243.153.40]) by localhost (filtteri5.pp.htv.fi [213.243.153.188]) (amavisd-new, port 10024) with ESMTP id XpaTkM+Jx0t0; Tue, 18 Jun 2013 20:07:49 +0300 (EEST) Received: from blackmetal.pp.htv.fi (cs181064211.pp.htv.fi [82.181.64.211]) by smtp6.welho.com (Postfix) with ESMTP id 23E915BC00F; Tue, 18 Jun 2013 20:07:49 +0300 (EEST) From: Aaro Koskinen To: Felipe Balbi , linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Aaro Koskinen Subject: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver Date: Tue, 18 Jun 2013 20:07:01 +0300 Message-Id: <1371575221-360-5-git-send-email-aaro.koskinen@iki.fi> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1371575221-360-1-git-send-email-aaro.koskinen@iki.fi> References: <1371575221-360-1-git-send-email-aaro.koskinen@iki.fi> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Spam-Status: No, score=-8.1 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen --- drivers/usb/phy/Kconfig | 14 ++ drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-tahvo.c | 448 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 463 insertions(+) create mode 100644 drivers/usb/phy/phy-tahvo.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 14a50bd..a5c7937 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -145,6 +145,20 @@ config OMAP_OTG This driver can also be built as a module. If so, the module will be called omap-otg. +config TAHVO_USB + tristate "Tahvo USB transceiver driver" + depends on MFD_RETU && EXTCON + help + Enable this to support USB transceiver on Tahvo. This is used + at least on Nokia 770. + +config TAHVO_USB_HOST_BY_DEFAULT + depends on TAHVO_USB + boolean "Device in USB host mode by default" + help + Say Y here, if you want the device to enter USB host mode + by default on bootup. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index c7f391b..f3984d1 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -13,6 +13,7 @@ phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o +obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c new file mode 100644 index 0000000..a2d96a2 --- /dev/null +++ b/drivers/usb/phy/phy-tahvo.c @@ -0,0 +1,448 @@ +/* + * Tahvo USB transceiver driver + * + * Copyright (C) 2005-2006 Nokia Corporation + * + * Parts copied from isp1301_omap.c. + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2004 David Brownell + * + * Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs. + * Modified for Retu/Tahvo MFD by Aaro Koskinen. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "tahvo-usb" + +#define TAHVO_REG_IDSR 0x02 +#define TAHVO_REG_USBR 0x06 + +#define USBR_SLAVE_CONTROL (1 << 8) +#define USBR_VPPVIO_SW (1 << 7) +#define USBR_SPEED (1 << 6) +#define USBR_REGOUT (1 << 5) +#define USBR_MASTER_SW2 (1 << 4) +#define USBR_MASTER_SW1 (1 << 3) +#define USBR_SLAVE_SW (1 << 2) +#define USBR_NSUSPEND (1 << 1) +#define USBR_SEMODE (1 << 0) + +#define TAHVO_MODE_HOST 0 +#define TAHVO_MODE_PERIPHERAL 1 + +struct tahvo_usb { + struct platform_device *pt_dev; + struct usb_phy phy; + int vbus_state; + struct mutex serialize; + struct clk *ick; + int irq; + int tahvo_mode; + struct extcon_dev extcon; +}; + +static const char *tahvo_cable[] = { + "USB-HOST", + "USB", + NULL, +}; + +static ssize_t vbus_state_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct tahvo_usb *tu = dev_get_drvdata(device); + return sprintf(buf, "%d\n", tu->vbus_state); +} +static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL); + +static void check_vbus_state(struct tahvo_usb *tu) +{ + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent); + int reg, prev_state; + + reg = retu_read(rdev, TAHVO_REG_IDSR); + if (reg & TAHVO_STAT_VBUS) { + switch (tu->phy.state) { + case OTG_STATE_B_IDLE: + /* Enable the gadget driver */ + if (tu->phy.otg->gadget) + usb_gadget_vbus_connect(tu->phy.otg->gadget); + tu->phy.state = OTG_STATE_B_PERIPHERAL; + break; + case OTG_STATE_A_IDLE: + /* + * Session is now valid assuming the USB hub is driving + * Vbus. + */ + tu->phy.state = OTG_STATE_A_HOST; + break; + default: + break; + } + dev_info(&tu->pt_dev->dev, "USB cable connected\n"); + } else { + switch (tu->phy.state) { + case OTG_STATE_B_PERIPHERAL: + if (tu->phy.otg->gadget) + usb_gadget_vbus_disconnect(tu->phy.otg->gadget); + tu->phy.state = OTG_STATE_B_IDLE; + break; + case OTG_STATE_A_HOST: + tu->phy.state = OTG_STATE_A_IDLE; + break; + default: + break; + } + dev_info(&tu->pt_dev->dev, "USB cable disconnected\n"); + } + + prev_state = tu->vbus_state; + tu->vbus_state = reg & TAHVO_STAT_VBUS; + if (prev_state != tu->vbus_state) { + extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state); + sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state"); + } +} + +static void tahvo_usb_become_host(struct tahvo_usb *tu) +{ + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent); + + extcon_set_cable_state(&tu->extcon, "USB-HOST", true); + + /* Power up the transceiver in USB host mode */ + retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND | + USBR_MASTER_SW2 | USBR_MASTER_SW1); + tu->phy.state = OTG_STATE_A_IDLE; + + check_vbus_state(tu); +} + +static void tahvo_usb_stop_host(struct tahvo_usb *tu) +{ + tu->phy.state = OTG_STATE_A_IDLE; +} + +static void tahvo_usb_become_peripheral(struct tahvo_usb *tu) +{ + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent); + + extcon_set_cable_state(&tu->extcon, "USB-HOST", false); + + /* Power up transceiver and set it in USB peripheral mode */ + retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | + USBR_NSUSPEND | USBR_SLAVE_SW); + tu->phy.state = OTG_STATE_B_IDLE; + + check_vbus_state(tu); +} + +static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu) +{ + if (tu->phy.otg->gadget) + usb_gadget_vbus_disconnect(tu->phy.otg->gadget); + tu->phy.state = OTG_STATE_B_IDLE; +} + +static void tahvo_usb_power_off(struct tahvo_usb *tu) +{ + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent); + + /* Disable gadget controller if any */ + if (tu->phy.otg->gadget) + usb_gadget_vbus_disconnect(tu->phy.otg->gadget); + + /* Power off transceiver */ + retu_write(rdev, TAHVO_REG_USBR, 0); + tu->phy.state = OTG_STATE_UNDEFINED; +} + +static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend) +{ + struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, phy); + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent); + u16 w; + + dev_dbg(&tu->pt_dev->dev, "%s\n", __func__); + + w = retu_read(rdev, TAHVO_REG_USBR); + if (suspend) + w &= ~USBR_NSUSPEND; + else + w |= USBR_NSUSPEND; + retu_write(rdev, TAHVO_REG_USBR, w); + + return 0; +} + +static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy); + + dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host); + + if (otg == NULL) + return -ENODEV; + + mutex_lock(&tu->serialize); + + if (host == NULL) { + if (tu->tahvo_mode == TAHVO_MODE_HOST) + tahvo_usb_power_off(tu); + otg->host = NULL; + mutex_unlock(&tu->serialize); + return 0; + } + + if (tu->tahvo_mode == TAHVO_MODE_HOST) { + otg->host = NULL; + tahvo_usb_become_host(tu); + } + + otg->host = host; + + mutex_unlock(&tu->serialize); + + return 0; +} + +static int tahvo_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy); + + dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget); + + if (!otg) + return -ENODEV; + + mutex_lock(&tu->serialize); + + if (!gadget) { + if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL) + tahvo_usb_power_off(tu); + tu->phy.otg->gadget = NULL; + mutex_unlock(&tu->serialize); + return 0; + } + + tu->phy.otg->gadget = gadget; + if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL) + tahvo_usb_become_peripheral(tu); + + mutex_unlock(&tu->serialize); + + return 0; +} + +static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu) +{ + struct tahvo_usb *tu = _tu; + + mutex_lock(&tu->serialize); + check_vbus_state(tu); + mutex_unlock(&tu->serialize); + + return IRQ_HANDLED; +} + +static ssize_t otg_mode_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct tahvo_usb *tu = dev_get_drvdata(device); + + switch (tu->tahvo_mode) { + case TAHVO_MODE_HOST: + return sprintf(buf, "host\n"); + case TAHVO_MODE_PERIPHERAL: + return sprintf(buf, "peripheral\n"); + } + + return -EINVAL; +} + +static ssize_t otg_mode_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct tahvo_usb *tu = dev_get_drvdata(device); + int r; + + mutex_lock(&tu->serialize); + if (count >= 4 && strncmp(buf, "host", 4) == 0) { + if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL) + tahvo_usb_stop_peripheral(tu); + tu->tahvo_mode = TAHVO_MODE_HOST; + if (tu->phy.otg->host) { + dev_info(device, "HOST mode: host controller present\n"); + tahvo_usb_become_host(tu); + } else { + dev_info(device, "HOST mode: no host controller, powering off\n"); + tahvo_usb_power_off(tu); + } + r = strlen(buf); + } else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) { + if (tu->tahvo_mode == TAHVO_MODE_HOST) + tahvo_usb_stop_host(tu); + tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; + if (tu->phy.otg->gadget) { + dev_info(device, "PERIPHERAL mode: gadget driver present\n"); + tahvo_usb_become_peripheral(tu); + } else { + dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n"); + tahvo_usb_power_off(tu); + } + r = strlen(buf); + } else { + r = -EINVAL; + } + mutex_unlock(&tu->serialize); + + return r; +} + +static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store); + +static int tahvo_usb_probe(struct platform_device *pdev) +{ + struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent); + struct tahvo_usb *tu; + int ret; + + tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL); + if (!tu) + return -ENOMEM; + + tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg), + GFP_KERNEL); + if (!tu->phy.otg) + return -ENOMEM; + + tu->pt_dev = pdev; + + /* Default mode */ +#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT + tu->tahvo_mode = TAHVO_MODE_HOST; +#else + tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; +#endif + + mutex_init(&tu->serialize); + + tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick"); + if (!IS_ERR(tu->ick)) + clk_enable(tu->ick); + + /* + * Set initial state, so that we generate kevents only on state changes. + */ + tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS; + + tu->extcon.name = DRIVER_NAME; + tu->extcon.supported_cable = tahvo_cable; + ret = extcon_dev_register(&tu->extcon, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "could not register extcon device: %d\n", + ret); + return ret; + } + + /* Set the initial cable state. */ + extcon_set_cable_state(&tu->extcon, "USB-HOST", + tu->tahvo_mode == TAHVO_MODE_HOST); + extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state); + + tu->irq = platform_get_irq(pdev, 0); + ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, 0, + "tahvo-vbus", tu); + if (ret) { + dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n", + ret); + goto err_disable_clk; + } + + /* Attributes */ + ret = device_create_file(&pdev->dev, &dev_attr_vbus_state); + ret |= device_create_file(&pdev->dev, &dev_attr_otg_mode); + if (ret) + dev_err(&pdev->dev, "attribute creation failed: %d\n", ret); + + /* Create OTG interface */ + tahvo_usb_power_off(tu); + tu->phy.dev = &pdev->dev; + tu->phy.state = OTG_STATE_UNDEFINED; + tu->phy.label = DRIVER_NAME; + tu->phy.set_suspend = tahvo_usb_set_suspend; + + tu->phy.otg->phy = &tu->phy; + tu->phy.otg->set_host = tahvo_usb_set_host; + tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral; + + ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2); + if (ret < 0) { + dev_err(&pdev->dev, "cannot register USB transceiver: %d\n", + ret); + goto err_free_irq; + } + + dev_set_drvdata(&pdev->dev, tu); + + return 0; + +err_free_irq: + free_irq(tu->irq, tu); +err_disable_clk: + if (!IS_ERR(tu->ick)) + clk_disable(tu->ick); + + return ret; +} + +static int tahvo_usb_remove(struct platform_device *pdev) +{ + struct tahvo_usb *tu = platform_get_drvdata(pdev); + + free_irq(tu->irq, tu); + usb_remove_phy(&tu->phy); + device_remove_file(&pdev->dev, &dev_attr_vbus_state); + device_remove_file(&pdev->dev, &dev_attr_otg_mode); + extcon_dev_unregister(&tu->extcon); + if (!IS_ERR(tu->ick)) + clk_disable(tu->ick); + + return 0; +} + +static struct platform_driver tahvo_usb_driver = { + .probe = tahvo_usb_probe, + .remove = tahvo_usb_remove, + .driver = { + .name = "tahvo-usb", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(tahvo_usb_driver); + +MODULE_DESCRIPTION("Tahvo USB transceiver driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs"); +MODULE_AUTHOR("Aaro Koskinen ");