diff mbox

[1/4] ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL

Message ID 1374487277-26099-2-git-send-email-rnayak@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rajendra Nayak July 22, 2013, 10:01 a.m. UTC
With commit '82702ea11ddfe0e43382e1fa5b66d807d8114916' "ARM: OMAP2+:
Fix serial init for device tree based booting" stubbing out omap_serial_early_init()
for Device tree based booting, there was a crash observed on AM335x based devices
when hwmod does a _setup_reset() early at boot.

This was rootcaused to hwmod trying to reset console uart while earlycon was using it.
The way to tell hwmod not to do this is to specify the HWMOD_INIT_NO_RESET flag,
which were infact set by the omap_serial_early_init() function by parsing the
cmdline to identify the console device.

Parsing the cmdline to identify the uart used by earlycon itself seems broken
as there is nothing preventing earlycon to use a different one.

This patch, instead, attempts to populate the requiste flags for hwmod based on
the CONFIG_DEBUG_OMAPxUARTy FLAGS. This gets rid of the need for cmdline parsing
in the DT as well as non-DT cases to identify the uart used by earlycon.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reported-by: Mark Jackson <mpfj-list@newflow.co.uk>
Reported-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.h                   |   48 ++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |    6 +--
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         |    2 +-
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |    9 ++--
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    5 +-
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c         |    3 +-
 arch/arm/mach-omap2/serial.c                       |   11 -----
 7 files changed, 61 insertions(+), 23 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index aab33fd..8440a21 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -95,6 +95,54 @@  extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define MODULEMODE_HWCTRL		1
 #define MODULEMODE_SWCTRL		2
 
+#define DEBUG_OMAP2UART1_FLAGS	0
+#define DEBUG_OMAP2UART2_FLAGS	0
+#define DEBUG_OMAP2UART3_FLAGS	0
+#define DEBUG_OMAP3UART3_FLAGS	0
+#define DEBUG_OMAP3UART4_FLAGS	0
+#define DEBUG_OMAP4UART3_FLAGS	0
+#define DEBUG_OMAP4UART4_FLAGS	0
+#define DEBUG_TI81XXUART1_FLAGS	0
+#define DEBUG_TI81XXUART2_FLAGS	0
+#define DEBUG_TI81XXUART3_FLAGS	0
+#define DEBUG_AM33XXUART1_FLAGS	0
+
+#define DEBUG_OMAPUART_FLAGS	(HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+
+#if defined(CONFIG_DEBUG_OMAP2UART1)
+#undef DEBUG_OMAP2UART1_FLAGS
+#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART2)
+#undef DEBUG_OMAP2UART2_FLAGS
+#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART3)
+#undef DEBUG_OMAP2UART3_FLAGS
+#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART3)
+#undef DEBUG_OMAP3UART3_FLAGS
+#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART4)
+#undef DEBUG_OMAP3UART4_FLAGS
+#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART3)
+#undef DEBUG_OMAP4UART3_FLAGS
+#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART4)
+#undef DEBUG_OMAP4UART4_FLAGS
+#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART1)
+#undef DEBUG_TI81XXUART1_FLAGS
+#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART2)
+#undef DEBUG_TI81XXUART2_FLAGS
+#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART3)
+#undef DEBUG_TI81XXUART3_FLAGS
+#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_AM33XXUART1)
+#undef DEBUG_AM33XXUART1_FLAGS
+#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#endif
 
 /**
  * struct omap_hwmod_mux_info - hwmod specific mux configuration
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index d05fc7b..56cebb0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,7 +512,7 @@  struct omap_hwmod omap2xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -532,7 +532,7 @@  struct omap_hwmod omap2xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -552,7 +552,7 @@  struct omap_hwmod omap2xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 28bbd56..d4114a9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1512,7 +1512,7 @@  static struct omap_hwmod am33xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
 	.prcm		= {
 		.omap4	= {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f7a3df2..0c3a427 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,7 +490,7 @@  static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -509,7 +509,7 @@  static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -528,7 +528,8 @@  static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -558,7 +559,7 @@  static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d04b5e6..9c3b504 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2858,8 +2858,7 @@  static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-				HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -2875,7 +2874,7 @@  static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index f37ae96..3c70f5c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1375,7 +1375,7 @@  static struct omap_hwmod omap54xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= DEBUG_OMAP4UART3_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1391,6 +1391,7 @@  static struct omap_hwmod omap54xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= DEBUG_OMAP4UART4_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a674de..a388f8c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -208,17 +208,6 @@  static int __init omap_serial_early_init(void)
 				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 					uart_name, uart->num);
 			}
-
-			/*
-			 * omap-uart can be used for earlyprintk logs
-			 * So if omap-uart is used as console then prevent
-			 * uart reset and idle to get logs from omap-uart
-			 * until uart console driver is available to take
-			 * care for console messages.
-			 * Idling or resetting omap-uart while printing logs
-			 * early boot logs can stall the boot-up.
-			 */
-			oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 		}
 	} while (1);