| Message ID | 1377779572-22624-6-git-send-email-archit@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Archit, On Thursday 29 August 2013 06:02 PM, Archit Taneja wrote: > Add hwmod data for the VPE IP, this is needed for the IP to be reset during > boot, and control the functional clock when the driver needs it via > pm_runtime apis. Add the corresponding ocp_if struct and add it DRA7XX's > ocp interface list. You need to swap patches 5/6 and 6/6 to maintain git-bisect. Thats needed because after $subject patch, hwmod wouldn't find the register iospace and crash, and thats added only in patch 6/6. regards, Rajendra > > Cc: Rajendra Nayak <rnayak@ti.com> > Cc: Sricharan R <r.sricharan@ti.com> > Signed-off-by: Archit Taneja <archit@ti.com> > --- > arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 42 +++++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > index f647998b..181365d 100644 > --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > @@ -1883,6 +1883,39 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = { > }, > }; > > +/* > + * 'vpe' class > + * > + */ > + > +static struct omap_hwmod_class_sysconfig dra7xx_vpe_sysc = { > + .sysc_offs = 0x0010, > + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), > + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | > + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | > + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), > + .sysc_fields = &omap_hwmod_sysc_type2, > +}; > + > +static struct omap_hwmod_class dra7xx_vpe_hwmod_class = { > + .name = "vpe", > + .sysc = &dra7xx_vpe_sysc, > +}; > + > +/* vpe */ > +static struct omap_hwmod dra7xx_vpe_hwmod = { > + .name = "vpe", > + .class = &dra7xx_vpe_hwmod_class, > + .clkdm_name = "vpe_clkdm", > + .main_clk = "dpll_core_h23x2_ck", > + .prcm = { > + .omap4 = { > + .clkctrl_offs = DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET, > + .context_offs = DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET, > + .modulemode = MODULEMODE_HWCTRL, > + }, > + }, > +}; > > /* > * Interfaces > @@ -2636,6 +2669,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { > .user = OCP_USER_MPU | OCP_USER_SDMA, > }; > > +/* l4_per3 -> vpe */ > +static struct omap_hwmod_ocp_if dra7xx_l4_per3__vpe = { > + .master = &dra7xx_l4_per3_hwmod, > + .slave = &dra7xx_vpe_hwmod, > + .clk = "l3_iclk_div", > + .user = OCP_USER_MPU | OCP_USER_SDMA, > +}; > + > static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { > &dra7xx_l3_main_2__l3_instr, > &dra7xx_l4_cfg__l3_main_1, > @@ -2714,6 +2755,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { > &dra7xx_l3_main_1__vcp2, > &dra7xx_l4_per2__vcp2, > &dra7xx_l4_wkup__wd_timer2, > + &dra7xx_l4_per3__vpe, > NULL, > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 29 August 2013 06:12 PM, Rajendra Nayak wrote: > Archit, > > On Thursday 29 August 2013 06:02 PM, Archit Taneja wrote: >> Add hwmod data for the VPE IP, this is needed for the IP to be reset during >> boot, and control the functional clock when the driver needs it via >> pm_runtime apis. Add the corresponding ocp_if struct and add it DRA7XX's >> ocp interface list. > > You need to swap patches 5/6 and 6/6 to maintain git-bisect. > Thats needed because after $subject patch, hwmod wouldn't find > the register iospace and crash, and thats added only in patch 6/6. That's a good point, I'll take care of this. Thanks, Archit > > regards, > Rajendra > >> >> Cc: Rajendra Nayak <rnayak@ti.com> >> Cc: Sricharan R <r.sricharan@ti.com> >> Signed-off-by: Archit Taneja <archit@ti.com> >> --- >> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 42 +++++++++++++++++++++++++++++++ >> 1 file changed, 42 insertions(+) >> >> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c >> index f647998b..181365d 100644 >> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c >> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c >> @@ -1883,6 +1883,39 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = { >> }, >> }; >> >> +/* >> + * 'vpe' class >> + * >> + */ >> + >> +static struct omap_hwmod_class_sysconfig dra7xx_vpe_sysc = { >> + .sysc_offs = 0x0010, >> + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), >> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | >> + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | >> + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), >> + .sysc_fields = &omap_hwmod_sysc_type2, >> +}; >> + >> +static struct omap_hwmod_class dra7xx_vpe_hwmod_class = { >> + .name = "vpe", >> + .sysc = &dra7xx_vpe_sysc, >> +}; >> + >> +/* vpe */ >> +static struct omap_hwmod dra7xx_vpe_hwmod = { >> + .name = "vpe", >> + .class = &dra7xx_vpe_hwmod_class, >> + .clkdm_name = "vpe_clkdm", >> + .main_clk = "dpll_core_h23x2_ck", >> + .prcm = { >> + .omap4 = { >> + .clkctrl_offs = DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET, >> + .context_offs = DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET, >> + .modulemode = MODULEMODE_HWCTRL, >> + }, >> + }, >> +}; >> >> /* >> * Interfaces >> @@ -2636,6 +2669,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { >> .user = OCP_USER_MPU | OCP_USER_SDMA, >> }; >> >> +/* l4_per3 -> vpe */ >> +static struct omap_hwmod_ocp_if dra7xx_l4_per3__vpe = { >> + .master = &dra7xx_l4_per3_hwmod, >> + .slave = &dra7xx_vpe_hwmod, >> + .clk = "l3_iclk_div", >> + .user = OCP_USER_MPU | OCP_USER_SDMA, >> +}; >> + >> static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { >> &dra7xx_l3_main_2__l3_instr, >> &dra7xx_l4_cfg__l3_main_1, >> @@ -2714,6 +2755,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { >> &dra7xx_l3_main_1__vcp2, >> &dra7xx_l4_per2__vcp2, >> &dra7xx_l4_wkup__wd_timer2, >> + &dra7xx_l4_per3__vpe, >> NULL, >> }; >> >> > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index f647998b..181365d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1883,6 +1883,39 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = { }, }; +/* + * 'vpe' class + * + */ + +static struct omap_hwmod_class_sysconfig dra7xx_vpe_sysc = { + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class dra7xx_vpe_hwmod_class = { + .name = "vpe", + .sysc = &dra7xx_vpe_sysc, +}; + +/* vpe */ +static struct omap_hwmod dra7xx_vpe_hwmod = { + .name = "vpe", + .class = &dra7xx_vpe_hwmod_class, + .clkdm_name = "vpe_clkdm", + .main_clk = "dpll_core_h23x2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; /* * Interfaces @@ -2636,6 +2669,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per3 -> vpe */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__vpe = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_vpe_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_2__l3_instr, &dra7xx_l4_cfg__l3_main_1, @@ -2714,6 +2755,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__vcp2, &dra7xx_l4_per2__vcp2, &dra7xx_l4_wkup__wd_timer2, + &dra7xx_l4_per3__vpe, NULL, };
Add hwmod data for the VPE IP, this is needed for the IP to be reset during boot, and control the functional clock when the driver needs it via pm_runtime apis. Add the corresponding ocp_if struct and add it DRA7XX's ocp interface list. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 42 +++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)