new file mode 100644
@@ -0,0 +1,28 @@
+TI CPSW Phy mode Selection Device Tree Bindings
+-----------------------------------------------
+
+Required properties:
+- compatible : Should be "ti,am3352-cpsw-phy-sel"
+- reg : physical base address and size of the cpsw
+ registers map
+- reg-names : names of the register map given in "reg" node
+
+Optional properties:
+-rmii-clock-ext : If present, the driver will configure the RMII
+ interface to external clock usage
+
+Examples:
+
+ phy_sel: cpsw-phy-sel@44e10650 {
+ compatible = "ti,am3352-cpsw-phy-sel";
+ reg= <0x44e10650 0x4>;
+ reg-names = "gmii-sel";
+ };
+
+(or)
+ phy_sel: cpsw-phy-sel@44e10650 {
+ compatible = "ti,am3352-cpsw-phy-sel";
+ reg= <0x44e10650 0x4>;
+ reg-names = "gmii-sel";
+ rmii-clock-ext;
+ };
@@ -49,11 +49,19 @@ config TI_DAVINCI_CPDMA
To compile this driver as a module, choose M here: the module
will be called davinci_cpdma. This is recommended.
+config TI_CPSW_PHY_SEL
+ boolean "TI CPSW Switch Phy sel Support"
+ depends on TI_CPSW
+ ---help---
+ This driver supports configuring of the phy mode connected to
+ the CPSW.
+
config TI_CPSW
tristate "TI CPSW Switch Support"
depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
select TI_DAVINCI_CPDMA
select TI_DAVINCI_MDIO
+ select TI_CPSW_PHY_SEL
---help---
This driver supports TI's CPSW Ethernet Switch.
@@ -7,5 +7,6 @@ obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
+obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
ti_cpsw-y := cpsw_ale.o cpsw.o cpts.o
new file mode 100644
@@ -0,0 +1,161 @@
+/* Texas Instruments Ethernet Switch Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "cpsw.h"
+
+/* AM33xx SoC specific definitions for the CONTROL port */
+#define AM33XX_GMII_SEL_MODE_MII 0
+#define AM33XX_GMII_SEL_MODE_RMII 1
+#define AM33XX_GMII_SEL_MODE_RGMII 2
+
+#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN BIT(7)
+#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN BIT(6)
+
+struct cpsw_phy_sel_priv {
+ struct device *dev;
+ u32 __iomem *gmii_sel;
+ bool rmii_clock_external;
+ void (*cpsw_phy_sel)(struct cpsw_phy_sel_priv *priv,
+ phy_interface_t phy_mode, int slave);
+};
+
+
+static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv,
+ phy_interface_t phy_mode, int slave)
+{
+ u32 reg;
+ u32 mask;
+ u32 mode = 0;
+
+ reg = readl(priv->gmii_sel);
+
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ mode = AM33XX_GMII_SEL_MODE_RMII;
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ mode = AM33XX_GMII_SEL_MODE_RGMII;
+ break;
+
+ case PHY_INTERFACE_MODE_MII:
+ default:
+ mode = AM33XX_GMII_SEL_MODE_MII;
+ break;
+ };
+
+ mask = 0x3 << (slave * 2) | BIT(slave + 6);
+ mode <<= slave * 2;
+
+ if (priv->rmii_clock_external) {
+ if (slave == 0)
+ mode |= AM33XX_GMII_SEL_RMII1_IO_CLK_EN;
+ else
+ mode |= AM33XX_GMII_SEL_RMII2_IO_CLK_EN;
+ }
+
+ reg &= ~mask;
+ reg |= mode;
+
+ writel(reg, priv->gmii_sel);
+}
+
+static struct platform_driver cpsw_phy_sel_driver;
+static int match(struct device *dev, void *data)
+{
+ struct device_node *node = (struct device_node *)data;
+ return dev->of_node == node &&
+ dev->driver == &cpsw_phy_sel_driver.driver;
+}
+
+void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave)
+{
+ struct device_node *node;
+ struct cpsw_phy_sel_priv *priv;
+
+ node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel");
+ if (!node) {
+ dev_err(dev, "Phy mode driver DT not found\n");
+ return;
+ }
+
+ dev = bus_find_device(&platform_bus_type, NULL, node, match);
+ priv = dev_get_drvdata(dev);
+
+ priv->cpsw_phy_sel(priv, phy_mode, slave);
+}
+EXPORT_SYMBOL_GPL(cpsw_phy_sel);
+
+static const struct of_device_id cpsw_phy_sel_id_table[] = {
+ {
+ .compatible = "ti,am3352-cpsw-phy-sel",
+ .data = &cpsw_gmii_sel_am3352,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table);
+
+static int cpsw_phy_sel_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct of_device_id *of_id;
+ struct cpsw_phy_sel_priv *priv;
+
+ of_id = of_match_node(cpsw_phy_sel_id_table, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "unable to alloc memory for cpsw phy sel\n");
+ return -ENOMEM;
+ }
+
+ priv->cpsw_phy_sel = of_id->data;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gmii-sel");
+ priv->gmii_sel = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->gmii_sel))
+ return PTR_ERR(priv->gmii_sel);
+
+ if (of_find_property(pdev->dev.of_node, "rmii-clock-ext", NULL))
+ priv->rmii_clock_external = true;
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ return 0;
+}
+
+static struct platform_driver cpsw_phy_sel_driver = {
+ .probe = cpsw_phy_sel_probe,
+ .driver = {
+ .name = "cpsw-phy-sel",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(cpsw_phy_sel_id_table),
+ },
+};
+
+module_platform_driver(cpsw_phy_sel_driver);
+MODULE_AUTHOR("Mugunthan V N <mugunthanvnm@ti.com>");
+MODULE_LICENSE("GPL v2");
@@ -39,4 +39,6 @@ struct cpsw_platform_data {
bool dual_emac; /* Enable Dual EMAC mode */
};
+void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave);
+
#endif /* __CPSW_H__ */