diff mbox

[net-next,3/4] drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode

Message ID 1379704841-32693-4-git-send-email-mugunthanvnm@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mugunthan V N Sept. 20, 2013, 7:20 p.m. UTC 
Phy mode can be configured via the cpsw-phy-sel driver, this patch enabled the
cpsw driver to utilise the api provided by the cpsw-phy-sel driver to configure
the phy mode.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Daniel Mack <zonque@gmail.com>
---
 drivers/net/ethernet/ti/cpsw.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 01c42e1..5efb37b 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1021,6 +1021,10 @@  static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 		dev_info(priv->dev, "phy found : id is : 0x%x\n",
 			 slave->phy->phy_id);
 		phy_start(slave->phy);
+
+		/* Configure GMII_SEL register */
+		cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
+			     slave->slave_num);
 	}
 }