From patchwork Tue Oct 22 13:01:35 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Reichel X-Patchwork-Id: 3082711 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id A3A209F2B8 for ; Tue, 22 Oct 2013 13:02:31 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 6806B2041B for ; Tue, 22 Oct 2013 13:02:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 1DFF5202C0 for ; Tue, 22 Oct 2013 13:02:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753557Ab3JVNCN (ORCPT ); Tue, 22 Oct 2013 09:02:13 -0400 Received: from ring0.de ([91.143.88.219]:36211 "EHLO smtp.ring0.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752823Ab3JVNCI (ORCPT ); Tue, 22 Oct 2013 09:02:08 -0400 Received: from comu.ring0.de (unknown [127.0.0.1]) by smtp.ring0.de (Postfix) with ESMTP id 8959C2C58F35; Tue, 22 Oct 2013 15:02:07 +0200 (CEST) Received: (from spamd@localhost) by comu.ring0.de (8.13.8/8.13.8/Submit) id r9MD25Ul020645; Tue, 22 Oct 2013 15:02:05 +0200 X-Authentication-Warning: comu.ring0.de: spamd set sender to sre@ring0.de using -f X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-7.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from sre.ring0.de (unknown [134.106.93.31]) by smtp.ring0.de (Postfix) with ESMTP id 6A4F32C58F2E; Tue, 22 Oct 2013 15:01:42 +0200 (CEST) From: Sebastian Reichel To: Sebastian Reichel , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren , Bryan Wu , Richard Purdie Cc: Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Russell King , Rob Landley , Linus Walleij , Milo Kim , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, linux-omap@vger.kernel.org, Sebastian Reichel Subject: [PATCH 1/2] leds: lp55xx: handle enable pin in driver Date: Tue, 22 Oct 2013 15:01:35 +0200 Message-Id: <1382446896-28436-2-git-send-email-sre@debian.org> X-Mailer: git-send-email 1.8.4.rc3 In-Reply-To: <1382446896-28436-1-git-send-email-sre@debian.org> References: <1382446896-28436-1-git-send-email-sre@debian.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch moves the handling of the chip's enable pin from the board code into the driver. It also updates all board-code files using the driver to incorporate this change. This is needed for device tree support of the enable pin. Signed-off-by: Sebastian Reichel Acked-by: Linus Walleij Acked-by: Tony Lindgren Acked-by: Bryan Wu --- .../devicetree/bindings/leds/leds-lp55xx.txt | 1 + arch/arm/mach-omap2/board-rx51-peripherals.c | 20 +---------------- arch/arm/mach-ux500/board-mop500.c | 2 ++ drivers/leds/leds-lp55xx-common.c | 25 +++++++++++----------- include/linux/platform_data/leds-lp55xx.h | 6 ++---- 5 files changed, 19 insertions(+), 35 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index a61727f..5fb7b21 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -10,6 +10,7 @@ Each child has own specific current settings - max-cur: Maximun current at each led channel. Optional properties: +- enable-gpio: GPIO attached to the chip's enable pin - label: Used for naming LEDs - pwr-sel: LP8501 specific property. Power selection for output channels. 0: D1~9 are connected to VDD diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f6fe388..68dc998 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -211,29 +211,11 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = { } }; -static int rx51_lp5523_setup(void) -{ - return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, - "lp5523_enable"); -} - -static void rx51_lp5523_release(void) -{ - gpio_free(RX51_LP5523_CHIP_EN_GPIO); -} - -static void rx51_lp5523_enable(bool state) -{ - gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); -} - static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), .clock_mode = LP55XX_CLOCK_AUTO, - .setup_resources = rx51_lp5523_setup, - .release_resources = rx51_lp5523_release, - .enable = rx51_lp5523_enable, + .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, }; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ad0806e..703dec2 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -297,6 +297,7 @@ static struct lp55xx_platform_data __initdata lp5521_pri_data = { .led_config = &lp5521_pri_led[0], .num_channels = 3, .clock_mode = LP55XX_CLOCK_EXT, + .enable_gpio = -1, }; static struct lp55xx_led_config lp5521_sec_led[] = { @@ -322,6 +323,7 @@ static struct lp55xx_platform_data __initdata lp5521_sec_data = { .led_config = &lp5521_sec_led[0], .num_channels = 3, .clock_mode = LP55XX_CLOCK_EXT, + .enable_gpio = -1, }; /* I2C0 devices only available on the first HREF/MOP500 */ diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index 351825b..5160f8e 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include "leds-lp55xx-common.h" @@ -406,18 +408,18 @@ int lp55xx_init_device(struct lp55xx_chip *chip) if (!pdata || !cfg) return -EINVAL; - if (pdata->setup_resources) { - ret = pdata->setup_resources(); + if (gpio_is_valid(pdata->enable_gpio)) { + ret = devm_gpio_request_one(dev, pdata->enable_gpio, + GPIOF_DIR_OUT, "lp5523_enable"); if (ret < 0) { - dev_err(dev, "setup resoure err: %d\n", ret); + dev_err(dev, "could not acquire enable gpio (err=%d)\n", + ret); goto err; } - } - if (pdata->enable) { - pdata->enable(0); + gpio_set_value(pdata->enable_gpio, 0); usleep_range(1000, 2000); /* Keep enable down at least 1ms */ - pdata->enable(1); + gpio_set_value(pdata->enable_gpio, 1); usleep_range(1000, 2000); /* 500us abs min. */ } @@ -458,11 +460,8 @@ void lp55xx_deinit_device(struct lp55xx_chip *chip) if (chip->clk) clk_disable_unprepare(chip->clk); - if (pdata->enable) - pdata->enable(0); - - if (pdata->release_resources) - pdata->release_resources(); + if (gpio_is_valid(pdata->enable_gpio)) + gpio_set_value(pdata->enable_gpio, 0); } EXPORT_SYMBOL_GPL(lp55xx_deinit_device); @@ -593,6 +592,8 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np) of_property_read_string(np, "label", &pdata->label); of_property_read_u8(np, "clock-mode", &pdata->clock_mode); + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); + /* LP8501 specific */ of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel); diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 51a2ff5..820a5c7 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -66,10 +66,8 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; - /* Platform specific functions */ - int (*setup_resources)(void); - void (*release_resources)(void); - void (*enable)(bool state); + /* optional enable GPIO */ + int enable_gpio; /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns;