| Message ID | 1386339891-32717-6-git-send-email-sourav.poddar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday, December 06, 2013 at 03:24:46 PM, Sourav Poddar wrote: > Adapt qspi driver to use (get_buf/put_buf) pointers added > earlier. > These can be called just before the memcpy operations to get hold > of the memory mapped address and to turn on the controller clocks. > > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > --- > v1->v2: > enable/disable memory mapped only when get_buf/put_buf is > called (basicaaly only when memory mapped read operation is > desired). > drivers/spi/spi-ti-qspi.c | 19 +++++++++++++++++++ > 1 files changed, 19 insertions(+), 0 deletions(-) > > diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c > index e4a8afc..b83583c 100644 > --- a/drivers/spi/spi-ti-qspi.c > +++ b/drivers/spi/spi-ti-qspi.c > @@ -248,6 +248,23 @@ static void ti_qspi_configure_from_slave(struct > spi_device *spi) ti_qspi_write(qspi, memval, QSPI_SPI_SETUP0_REG); > } > > +static inline int __iomem *ti_qspi_get_mem_buf(struct spi_master *master) Should this not be a 'void __iomem *' instead of 'int __iomem *' in any case ? > +{ > + struct ti_qspi *qspi = spi_master_get_devdata(master); > + > + pm_runtime_get_sync(qspi->dev); > + enable_qspi_memory_mapped(qspi); > + return qspi->mmap_base; > +} > + > +static void ti_qspi_put_mem_buf(struct spi_master *master) > +{ > + struct ti_qspi *qspi = spi_master_get_devdata(master); > + > + disable_qspi_memory_mapped(qspi); > + pm_runtime_put(qspi->dev); > +} > + > static void ti_qspi_restore_ctx(struct ti_qspi *qspi) > { > struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; > @@ -517,6 +534,8 @@ static int ti_qspi_probe(struct platform_device *pdev) > master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1); > master->mmap = true; > master->configure_from_slave = ti_qspi_configure_from_slave; > + master->get_buf = ti_qspi_get_mem_buf; > + master->put_buf = ti_qspi_put_mem_buf; > > if (!of_property_read_u32(np, "num-cs", &num_cs)) > master->num_chipselect = num_cs; Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 10 December 2013 06:28 PM, Marek Vasut wrote: > On Friday, December 06, 2013 at 03:24:46 PM, Sourav Poddar wrote: >> Adapt qspi driver to use (get_buf/put_buf) pointers added >> earlier. >> These can be called just before the memcpy operations to get hold >> of the memory mapped address and to turn on the controller clocks. >> >> Signed-off-by: Sourav Poddar<sourav.poddar@ti.com> >> --- >> v1->v2: >> enable/disable memory mapped only when get_buf/put_buf is >> called (basicaaly only when memory mapped read operation is >> desired). >> drivers/spi/spi-ti-qspi.c | 19 +++++++++++++++++++ >> 1 files changed, 19 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c >> index e4a8afc..b83583c 100644 >> --- a/drivers/spi/spi-ti-qspi.c >> +++ b/drivers/spi/spi-ti-qspi.c >> @@ -248,6 +248,23 @@ static void ti_qspi_configure_from_slave(struct >> spi_device *spi) ti_qspi_write(qspi, memval, QSPI_SPI_SETUP0_REG); >> } >> >> +static inline int __iomem *ti_qspi_get_mem_buf(struct spi_master *master) > Should this not be a 'void __iomem *' instead of 'int __iomem *' in any case ? > Yes, it should be. Will fix in v3. >> +{ >> + struct ti_qspi *qspi = spi_master_get_devdata(master); >> + >> + pm_runtime_get_sync(qspi->dev); >> + enable_qspi_memory_mapped(qspi); >> + return qspi->mmap_base; >> +} >> + >> +static void ti_qspi_put_mem_buf(struct spi_master *master) >> +{ >> + struct ti_qspi *qspi = spi_master_get_devdata(master); >> + >> + disable_qspi_memory_mapped(qspi); >> + pm_runtime_put(qspi->dev); >> +} >> + >> static void ti_qspi_restore_ctx(struct ti_qspi *qspi) >> { >> struct ti_qspi_regs *ctx_reg =&qspi->ctx_reg; >> @@ -517,6 +534,8 @@ static int ti_qspi_probe(struct platform_device *pdev) >> master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1); >> master->mmap = true; >> master->configure_from_slave = ti_qspi_configure_from_slave; >> + master->get_buf = ti_qspi_get_mem_buf; >> + master->put_buf = ti_qspi_put_mem_buf; >> >> if (!of_property_read_u32(np, "num-cs",&num_cs)) >> master->num_chipselect = num_cs; > Best regards, > Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index e4a8afc..b83583c 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -248,6 +248,23 @@ static void ti_qspi_configure_from_slave(struct spi_device *spi) ti_qspi_write(qspi, memval, QSPI_SPI_SETUP0_REG); } +static inline int __iomem *ti_qspi_get_mem_buf(struct spi_master *master) +{ + struct ti_qspi *qspi = spi_master_get_devdata(master); + + pm_runtime_get_sync(qspi->dev); + enable_qspi_memory_mapped(qspi); + return qspi->mmap_base; +} + +static void ti_qspi_put_mem_buf(struct spi_master *master) +{ + struct ti_qspi *qspi = spi_master_get_devdata(master); + + disable_qspi_memory_mapped(qspi); + pm_runtime_put(qspi->dev); +} + static void ti_qspi_restore_ctx(struct ti_qspi *qspi) { struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; @@ -517,6 +534,8 @@ static int ti_qspi_probe(struct platform_device *pdev) master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1); master->mmap = true; master->configure_from_slave = ti_qspi_configure_from_slave; + master->get_buf = ti_qspi_get_mem_buf; + master->put_buf = ti_qspi_put_mem_buf; if (!of_property_read_u32(np, "num-cs", &num_cs)) master->num_chipselect = num_cs;
Adapt qspi driver to use (get_buf/put_buf) pointers added earlier. These can be called just before the memcpy operations to get hold of the memory mapped address and to turn on the controller clocks. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> --- v1->v2: enable/disable memory mapped only when get_buf/put_buf is called (basicaaly only when memory mapped read operation is desired). drivers/spi/spi-ti-qspi.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)