new file mode 100644
@@ -0,0 +1,45 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN91c94/91c111 Controller
+
+Required properties:
+- compatible : Should be one of:
+ "smsc,lan91c94"
+ "smsc,lan91c111"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : Should contain SMSC LAN interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+ that services interrupts for this device
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+ should be performed on the device. Valid value for SMSC LAN is
+ 1, 2 or 4.
+- smsc,nowait : bool for fast accesses and no extra wait cycles
+- "smsc,leda" "smsc,ledb": string indicating when to glow led a or b, one of:
+ "100_10" : 100Mbps OR's with 10Mbps link detect
+ "10" : 10Mbps link detect
+ "100" : 100Mbps link detect
+ "FD" : Full Duplex Mode
+ "TX_RX" : TX or RX packet occurred
+ "TX" : TX packet occurred
+ "RX" : RX packet occurred
+
+Examples:
+
+ethernet@gpmc {
+ compatible = "smsc,lan91c94";
+ reg = <5 0x300 0xf>;
+ reg-io-width = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
+ smsc,nowait;
+ smsc,leda = "100_10";
+ smsc,ledb = "TX_RX";
+};
+
+ethernet@c8000000 {
+ compatible = "smsc,lan91c111";
+ reg = <0xc8000000 0x10>;
+ interrupt-parent = <&pic>;
+ interrupts = <27>;
+};
@@ -2184,6 +2184,101 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
}
}
+#if ENABLED(CONFIG_OF)
+static int smc_of_led_string(const char *val)
+{
+ if (!strcmp(val, "100_10"))
+ return RPC_LED_100_10;
+ else if (!strcmp(val, "10"))
+ return RPC_LED_10;
+ else if (!strcmp(val, "100"))
+ return RPC_LED_100;
+ else if (!strcmp(val, "FD"))
+ return RPC_LED_FD;
+ else if (!strcmp(val, "TX_RX"))
+ return RPC_LED_TX_RX;
+ else if (!strcmp(val, "TX"))
+ return RPC_LED_TX;
+ else if (!strcmp(val, "RX"))
+ return RPC_LED_RX;
+
+ return -1;
+}
+
+static struct smc91x_platdata *smc_of_pdata(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ unsigned long flags = 0;
+ int io_shift, io_width;
+ int led_a = -1, led_b = -1;
+ const char *led_prop;
+ struct smc91x_platdata *pd = NULL;
+
+ if (!of_property_read_u32(np, "reg-io-width", &io_width)) {
+ switch (io_width) {
+ case 1:
+ flags |= SMC91X_USE_8BIT;
+ break;
+ case 2:
+ flags |= SMC91X_USE_16BIT;
+ break;
+ case 4:
+ flags |= SMC91X_USE_32BIT;
+ break;
+ default:
+ dev_err(dev, "reg-io-width %d should be 1, 2 or 4\n",
+ io_width);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ if (!of_property_read_u32(np, "reg-shift", &io_shift)) {
+ if (io_shift > 3) {
+ dev_err(dev, "reg-shift %d should be <= 3\n",
+ io_shift);
+ return ERR_PTR(-EINVAL);
+ }
+ flags |= io_shift << 4;
+ }
+
+ flags |= of_property_read_bool(np, "smsc,nowait") ? SMC91X_NOWAIT : 0;
+
+ if (!of_property_read_string(np, "smsc,leda", &led_prop)) {
+ led_a = smc_of_led_string(led_prop);
+ if (led_a < 0) {
+ dev_err(dev, "smsc,leda %s unknown value\n", led_prop);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+ if (!of_property_read_string(np, "smsc,ledb", &led_prop)) {
+ led_b = smc_of_led_string(led_prop);
+ if (led_a < 0) {
+ dev_err(dev, "smsc,ledb %s unknown value\n", led_prop);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ if (flags || led_a >= 0 || led_b >= 0) {
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return ERR_PTR(-ENOMEM);
+
+ pd->flags = flags;
+ if (led_a >= 0)
+ pd->leda = led_a;
+ if (led_b >= 0)
+ pd->ledb = led_b;
+ }
+
+ return pd;
+}
+#else
+static inline struct smc91x_platdata *smc_of_pdata(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
/*
* smc_init(void)
* Input parameters:
@@ -2197,7 +2292,8 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
*/
static int smc_drv_probe(struct platform_device *pdev)
{
- struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct smc91x_platdata *pd = dev_get_platdata(dev);
struct smc_local *lp;
struct net_device *ndev;
struct resource *res, *ires;
@@ -2205,6 +2301,14 @@ static int smc_drv_probe(struct platform_device *pdev)
unsigned long irq_flags = SMC_IRQ_FLAGS;
int ret;
+ if (dev->of_node) {
+ pd = smc_of_pdata(dev);
+ if (IS_ERR(pd)) {
+ ret = PTR_ERR(pd);
+ goto out;
+ }
+ }
+
ndev = alloc_etherdev(sizeof(struct smc_local));
if (!ndev) {
ret = -ENOMEM;
commit 682a169 (smc91x: add devicetree support) introduced basic device tree support in the form of identifier match. However, platform_data flags equivalent was not introduced, nor was an appropriate bindings document introduced. In many legacy platforms such as Texas Instrument's SDP2430, platform_data flags have been used to describe the hardware behavior. So, introduce the legacy equivalent flags and bindings document to handle the transition to device tree enabled boot. Signed-off-by: Nishanth Menon <nm@ti.com> --- I am open to the suggestion to make smsc,leda|b macro based value instead of the current string based option. If it is prefered, i could move the bindings off to it's own patch as well. Currently this is squashed as it makes more sense to read in context. Documentation/devicetree/bindings/net/smsc91x.txt | 45 +++++++++ drivers/net/ethernet/smsc/smc91x.c | 106 ++++++++++++++++++++- 2 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/smsc91x.txt