@@ -172,6 +172,43 @@ static void __init am3517_evm_legacy_init(void)
static void __init omap3_dbb056_legacy_init(void)
{
+ struct clk *clkout2;
+ struct clk *cm96fck;
+
+ /* Reparent clkout2 to 96M_FCK */
+ pr_info("%s: Late Reparent clkout2 to 96M_FCK\n", __func__);
+ clkout2 = clk_get(NULL, "clkout2_src_ck");
+ if (clkout2 < 0) {
+ pr_err("a83x-quirk: couldn't get clkout2_src_ck\n");
+ return;
+ }
+ cm96fck = clk_get(NULL, "cm_96m_fck");
+ if (cm96fck < 0) {
+ pr_err("a83x-quirk: couldn't get cm_96m_fck\n");
+ return;
+ }
+ if (clk_set_parent(clkout2, cm96fck) < 0) {
+ pr_err("a83x-quirk: couldn't reparent clkout2_src_ck\n");
+ return;
+ }
+
+ /* Set clkout2 to 24MHz for internal usb hub*/
+ pr_info("%s: Set clkout2 to 24MHz for internal usb hub\n", __func__);
+ clkout2 = clk_get(NULL, "sys_clkout2");
+ if (clkout2 < 0) {
+ pr_err("%s: couldn't get sys_clkout2\n", __func__);
+ return;
+ }
+ if (clk_set_rate(clkout2, 24000000) < 0) {
+ pr_err("%s: couldn't set sys_clkout2 rate\n", __func__);
+ return;
+ }
+ if (clk_prepare_enable(clkout2) < 0) {
+ pr_err("%s: couldn't enable sys_clkout2\n", __func__);
+ return;
+ }
+
+ /* Initialize display */
omap3_dbb056_display_init_of();
}
#endif /* CONFIG_ARCH_OMAP3 */
Full device tree support for clock control, especially to set frequencies, is not yet accomplished. Until then, configure the 24Mhz of sys_clkout2 to feed an USB-Hub here. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> --- arch/arm/mach-omap2/pdata-quirks.c | 37 ++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)