[PATCHv2,3/5] wl1251: spi: add vio regulator support

Commit Message

Sebastian Reichel Feb. 14, 2014, 11:05 p.m. UTC

This patch adds support for requesting the regulator powering
the vio pin.

Signed-off-by: Sebastian Reichel <[e-mail]>
Reviewed-by: Pavel Machek <[e-mail]>
---
 drivers/net/wireless/ti/wl1251/spi.c    | 19 +++++++++++++++++--
 drivers/net/wireless/ti/wl1251/wl1251.h |  2 ++
 2 files changed, 19 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 6abcbc3..0a8aacc 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -27,6 +27,7 @@ 
 #include <linux/spi/spi.h>
 #include <linux/wl12xx.h>
 #include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 
 #include "wl1251.h"
 #include "reg.h"
@@ -306,13 +307,26 @@  static int wl1251_spi_probe(struct spi_device *spi)
 
 	irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
 
-	ret = wl1251_init_ieee80211(wl);
+	wl->vio = devm_regulator_get(&spi->dev, "vio");
+	if (IS_ERR(wl->vio)) {
+		ret = PTR_ERR(wl->vio);
+		wl1251_error("vio regulator missing: %d", ret);
+		goto out_free;
+	}
+
+	ret = regulator_enable(wl->vio);
 	if (ret)
 		goto out_free;
 
+	ret = wl1251_init_ieee80211(wl);
+	if (ret)
+		goto disable_regulator;
+
 	return 0;
 
- out_free:
+disable_regulator:
+	regulator_disable(wl->vio);
+out_free:
 	ieee80211_free_hw(hw);
 
 	return ret;
@@ -324,6 +338,7 @@  static int wl1251_spi_remove(struct spi_device *spi)
 
 	free_irq(wl->irq, wl);
 	wl1251_free_hw(wl);
+	regulator_disable(wl->vio);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 389fe25..16dae52 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -280,6 +280,8 @@  struct wl1251 {
 	int irq;
 	bool use_eeprom;
 
+	struct regulator *vio;
+
 	spinlock_t wl_lock;
 
 	enum wl1251_state state;