@@ -19,18 +19,6 @@
linux,default-trigger = "heartbeat";
};
};
-
- vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
- };
-
- vdd33a: regulator-vdd33a {
- compatible = "regulator-fixed";
- regulator-name = "vdd33a";
- regulator-always-on;
- };
};
&omap3_pmx_core {
@@ -42,39 +30,15 @@
};
};
+#include "omap-gpmc-smsc9221.dtsi"
+
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
- ethernet@5,0 {
- compatible = "smsc,lan9221", "smsc,lan9115";
+ ethernet@gpmc {
reg = <5 0 0xff>;
- bank-width = <2>;
-
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <42>;
- gpmc,cs-wr-off-ns = <36>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <42>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <36>;
- gpmc,rd-cycle-ns = <60>;
- gpmc,wr-cycle-ns = <54>;
- gpmc,access-ns = <36>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <18>;
- gpmc,wr-access-ns = <42>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
-
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
- reg-io-width = <4>;
};
};
Use the timings provided by omap-gpmc-smsc9221. This does not change the timings, but it avoids code duplication. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 42 ++------------------------ 1 file changed, 3 insertions(+), 39 deletions(-)