diff mbox

[v5,1/5] doc: Add "ti,am437x-dwc3" comaptible for dwc3 glue

Message ID 1395223803-4714-2-git-send-email-george.cherian@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

George Cherian March 19, 2014, 10:09 a.m. UTC 
Add the compatible "ti,am437x-dwc3" for dwc3 glue driver.

Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Felipe Balbi April 25, 2014, 4:17 p.m. UTC | #1 
On Wed, Mar 19, 2014 at 03:39:59PM +0530, George Cherian wrote:
> Add the compatible "ti,am437x-dwc3" for dwc3 glue driver.
> 
> Signed-off-by: George Cherian <george.cherian@ti.com>
> Acked-by: Roger Quadros <rogerq@ti.com>

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  Documentation/devicetree/bindings/usb/omap-usb.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> index 38b2fae..38d9bb8 100644
> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -44,7 +44,9 @@ Board specific device node entry
>  };
>  
>  OMAP DWC3 GLUE
> - - compatible : Should be "ti,dwc3"
> + - compatible : Should be
> +	* "ti,dwc3" for OMAP5 and DRA7
> +	* "ti,am437x-dwc3" for AM437x
>   - ti,hwmods : Should be "usb_otg_ss"
>   - reg : Address and length of the register set for the device.
>   - interrupts : The irq number of this device that is used to interrupt the
> -- 
> 1.8.3.1
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 38b2fae..38d9bb8 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -44,7 +44,9 @@  Board specific device node entry
 };
 
 OMAP DWC3 GLUE
- - compatible : Should be "ti,dwc3"
+ - compatible : Should be
+	* "ti,dwc3" for OMAP5 and DRA7
+	* "ti,am437x-dwc3" for AM437x
  - ti,hwmods : Should be "usb_otg_ss"
  - reg : Address and length of the register set for the device.
  - interrupts : The irq number of this device that is used to interrupt the