| Message ID | 1395223803-4714-4-git-send-email-george.cherian@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 19, 2014 at 03:40:01PM +0530, George Cherian wrote: > Add nodes for 2 instances each of > - ocp2scp > - USB PHY control module > - USB PHY > - dwc3_omap > - USB > > for AM43xx. > > Signed-off-by: George Cherian <george.cherian@ti.com> > Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> > --- > arch/arm/boot/dts/am4372.dtsi | 94 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 94 insertions(+) > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > index 36d523a..cedb9d4 100644 > --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -735,6 +735,100 @@ > #size-cells = <1>; > status = "disabled"; > }; > + > + am43xx_control_usb2phy1: control-phy@44e10620 { > + compatible = "ti,control-phy-usb2-am437"; > + reg = <0x44e10620 0x4>; > + reg-names = "power"; > + }; > + > + am43xx_control_usb2phy2: control-phy@0x44e10628 { > + compatible = "ti,control-phy-usb2-am437"; > + reg = <0x44e10628 0x4>; > + reg-names = "power"; > + }; > + > + ocp2scp0: ocp2scp@483a8000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + ti,hwmods = "ocp2scp0"; > + > + usb2_phy1: phy@483a8000 { > + compatible = "ti,am437x-usb2"; > + reg = <0x483a8000 0x8000>; > + ctrl-module = <&am43xx_control_usb2phy1>; > + clocks = <&usb_phy0_always_on_clk32k>, > + <&usb_otg_ss0_refclk960m>; > + clock-names = "wkupclk", "refclk"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + }; > + > + ocp2scp1: ocp2scp@483e8000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + ti,hwmods = "ocp2scp1"; > + > + usb2_phy2: phy@483e8000 { > + compatible = "ti,am437x-usb2"; > + reg = <0x483e8000 0x8000>; > + ctrl-module = <&am43xx_control_usb2phy2>; > + clocks = <&usb_phy1_always_on_clk32k>, > + <&usb_otg_ss1_refclk960m>; > + clock-names = "wkupclk", "refclk"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + }; > + > + dwc3_1: omap_dwc3@48380000 { > + compatible = "ti,am437x-dwc3"; > + ti,hwmods = "usb_otg_ss0"; > + reg = <0x48380000 0x10000>; > + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <1>; > + ranges; > + > + usb1: usb@48390000 { > + compatible = "synopsys,dwc3"; > + reg = <0x48390000 0x17000>; > + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usb2_phy1>; > + phy-names = "usb2-phy"; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + status = "disabled"; > + }; > + }; > + > + dwc3_2: omap_dwc3@483c0000 { > + compatible = "ti,am437x-dwc3"; > + ti,hwmods = "usb_otg_ss1"; > + reg = <0x483c0000 0x10000>; > + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <1>; > + ranges; > + > + usb2: usb@483d0000 { > + compatible = "synopsys,dwc3"; > + reg = <0x483d0000 0x17000>; > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usb2_phy2>; > + phy-names = "usb2-phy"; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + status = "disabled"; > + }; > + }; > }; > }; > > -- > 1.8.3.1 >
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 36d523a..cedb9d4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -735,6 +735,100 @@ #size-cells = <1>; status = "disabled"; }; + + am43xx_control_usb2phy1: control-phy@44e10620 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10620 0x4>; + reg-names = "power"; + }; + + am43xx_control_usb2phy2: control-phy@0x44e10628 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10628 0x4>; + reg-names = "power"; + }; + + ocp2scp0: ocp2scp@483a8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp0"; + + usb2_phy1: phy@483a8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483a8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy1>; + clocks = <&usb_phy0_always_on_clk32k>, + <&usb_otg_ss0_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + ocp2scp1: ocp2scp@483e8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + + usb2_phy2: phy@483e8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483e8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy2>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + dwc3_1: omap_dwc3@48380000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x48380000 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb1: usb@48390000 { + compatible = "synopsys,dwc3"; + reg = <0x48390000 0x17000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + dwc3_2: omap_dwc3@483c0000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x483c0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb2: usb@483d0000 { + compatible = "synopsys,dwc3"; + reg = <0x483d0000 0x17000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; }; };