diff mbox

[v3,4/4] ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition

Message ID 1398157362-32571-2-git-send-email-pekon@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

pekon gupta April 22, 2014, 9:02 a.m. UTC 
MTD NAND partition for file-system should start at offset=0xA00000

Signed-off-by: Pekon Gupta <pekon@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Tony Lindgren May 6, 2014, 3:55 p.m. UTC | #1 
* Pekon Gupta <pekon@ti.com> [140422 02:03]:
> MTD NAND partition for file-system should start at offset=0xA00000

Applying to omap-for-v3.16/fixes-not-urgent with hex changed to use
lower case like we tend to do.

Hmm, how come you did not fold this into the original patch to the
mainline kernel as it seems you had the fix in the vendor tree
earlier?

Regards,

Tony
 
> Signed-off-by: Pekon Gupta <pekon@ti.com>
> ---
>  arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
> index 167dbc8..d09e6fb 100644
> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
> @@ -341,7 +341,7 @@
>  		};
>  		partition@9 {
>  			label = "NAND.file-system";
> -			reg = <0x00800000 0x1F600000>;
> +			reg = <0x00A00000 0x1F600000>;
>  		};
>  	};
>  };
> -- 
> 1.8.5.1.163.gd7aced9
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 167dbc8..d09e6fb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -341,7 +341,7 @@ 
 		};
 		partition@9 {
 			label = "NAND.file-system";
-			reg = <0x00800000 0x1F600000>;
+			reg = <0x00A00000 0x1F600000>;
 		};
 	};
 };