@@ -51,3 +51,23 @@ palmas@48 {
....
};
}
+
+Example: With interrupts extended
+ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ Use pinmux 0x418 as wakeup interrupt and gpio1_0 as interrupt source
+
+palmas@48 {
+ compatible = "ti,twl6035", "ti,palmas";
+ reg = <0x48>
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&gpio1 0 IRQ_TYPE_LEVEL_HIGH>,
+ <&pinmux 0x418>;
+ pmic {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ ....
+ };
+}
With the recent pinctrl-single changes, SoCs such as OMAP family can treat wake-up events from deeper low power states as interrupts. This is usable when the wakeup from deeper low power states is triggered by a different hardware mechanism tied to pinctrl compared to the routine interrupt handling generating the reqular interrupt events. This is usually done on SoCs where the routine interrupt sources such as GPIO need to be disabled to be actually achieve low power state and wakeup is triggered from pinctrl interrupt source. Provide documentation example for the case where the system needs two interrupt sources when SoC is in deep sleep(1 to exit from deep sleep, and other from the module handling the actual event). Signed-off-by: Nishanth Menon <nm@ti.com> --- Documentation/devicetree/bindings/mfd/palmas.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)