@@ -49,9 +49,6 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
u32 reg, prog_io;
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
-
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
@@ -137,9 +134,6 @@ static void hsmmc2_before_set_reg(struct device *dev, int slot,
{
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
-
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
@@ -271,9 +265,6 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].gpio_wp = c->gpio_wp;
- mmc->slots[0].remux = c->remux;
- mmc->slots[0].init_card = c->init_card;
-
if (c->cover_only)
mmc->slots[0].cover = 1;
@@ -29,10 +29,6 @@ struct omap2_hsmmc_info {
int ocr_mask; /* temporary HACK */
int max_freq; /* maximum clock, if constrained by external
* circuitry, or 0 for default */
- /* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
- /* init some special card */
- void (*init_card)(struct mmc_card *card);
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
@@ -1682,14 +1682,6 @@ static int omap_hsmmc_get_ro(struct mmc_host *mmc)
return mmc_slot(host).get_ro(host->dev, 0);
}
-static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
-{
- struct omap_hsmmc_host *host = mmc_priv(mmc);
-
- if (mmc_slot(host).init_card)
- mmc_slot(host).init_card(card);
-}
-
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
@@ -1838,7 +1830,6 @@ static const struct mmc_host_ops omap_hsmmc_ops = {
.set_ios = omap_hsmmc_set_ios,
.get_cd = omap_hsmmc_get_cd,
.get_ro = omap_hsmmc_get_ro,
- .init_card = omap_hsmmc_init_card,
.enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
};
@@ -116,19 +116,15 @@ struct omap_hsmmc_platform_data {
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
- int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
int (*set_power)(struct device *dev, int slot,
int power_on, int vdd);
int (*get_ro)(struct device *dev, int slot);
- void (*remux)(struct device *dev, int slot, int power_on);
/* Call back before enabling / disabling regulators */
void (*before_set_reg)(struct device *dev, int slot,
int power_on, int vdd);
/* Call back after enabling / disabling regulators */
void (*after_set_reg)(struct device *dev, int slot,
int power_on, int vdd);
- /* if we have special card, init it using this callback */
- void (*init_card)(struct mmc_card *card);
/* return MMC cover switch state, can be NULL if not supported.
*
driver never references these fields Signed-off-by: Andreas Fenkart <afenkart@gmail.com> --- arch/arm/mach-omap2/hsmmc.c | 9 --------- arch/arm/mach-omap2/hsmmc.h | 4 ---- drivers/mmc/host/omap_hsmmc.c | 9 --------- include/linux/platform_data/hsmmc-omap.h | 4 ---- 4 files changed, 26 deletions(-)