@@ -21,8 +21,10 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
@@ -14,14 +14,15 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
-#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
#define OMAP24XX_NR_MMC 2
@@ -35,7 +35,6 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "mmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
@@ -15,13 +15,13 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
-#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
@@ -15,10 +15,10 @@
*/
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "cm33xx.h"
#include "prm33xx.h"
@@ -27,7 +27,6 @@
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
@@ -18,6 +18,7 @@
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
@@ -37,7 +38,6 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "serial.h"
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -39,7 +40,6 @@
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_54xx.h"
#include "prm54xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP5 interrupts external to MPUSS */
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
@@ -33,7 +34,6 @@
#include "cm2_7xx.h"
#include "prm7xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all DRA7XX interrupts external to MPUSS */
When splitting platform data of omap mmc/hsmmc driver it will allow to check which hwomod uses easily by looking at which header is included Signed-off-by: Andreas Fenkart <afenkart@gmail.com>