@@ -495,6 +495,30 @@ choice
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE CX models.
+ config DEBUG_OMAP1UART1
+ bool "Kernel low-level debugging via OMAP1 UART1"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (expect OMAP730) on the UART1.
+
+ config DEBUG_OMAP1UART2
+ bool "Kernel low-level debugging via OMAP1 UART2"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (expect OMAP730) on the UART2.
+
+ config DEBUG_OMAP1UART3
+ bool "Kernel low-level debugging via OMAP1 UART3"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (expect OMAP730) on the UART3.
+
config DEBUG_OMAP2UART1
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
depends on ARCH_OMAP2PLUS
@@ -537,6 +561,30 @@ choice
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
+ config DEBUG_OMAP7XXUART1
+ bool "Kernel low-level debugging via OMAP730 UART1"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART1.
+
+ config DEBUG_OMAP7XXUART2
+ bool "Kernel low-level debugging via OMAP730 UART2"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART2.
+
+ config DEBUG_OMAP7XXUART3
+ bool "Kernel low-level debugging via OMAP730 UART3"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART3.
+
config DEBUG_TI81XXUART1
bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
depends on ARCH_OMAP2PLUS
@@ -1163,6 +1211,9 @@ config DEBUG_UART_PHYS
default 0xffc02000 if DEBUG_SOCFPGA_UART
default 0xffd82340 if ARCH_IOP13XX
default 0xfff36000 if DEBUG_HIGHBANK_UART
+ default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+ default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+ default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfffe8600 if DEBUG_UART_BCM63XX
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1236,6 +1287,9 @@ config DEBUG_UART_VIRT
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfef36000 if DEBUG_HIGHBANK_UART
+ default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+ default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+ default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
@@ -1247,7 +1301,8 @@ config DEBUG_UART_VIRT
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if FOOTBRIDGE || ARCH_IOP32X
+ default 0 if FOOTBRIDGE || ARCH_IOP32X || \
+ DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
default 2
config DEBUG_UART_8250_WORD
deleted file mode 100644
@@ -1,101 +0,0 @@
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include "serial.h"
-
- .pushsection .data
-omap_uart_phys: .word 0x0
-omap_uart_virt: .word 0x0
- .popsection
-
- /*
- * Note that this code won't work if the bootloader passes
- * a wrong machine ID number in r1. To debug, just hardcode
- * the desired UART phys and virt addresses temporarily into
- * the omap_uart_phys and omap_uart_virt above.
- */
- .macro addruart, rp, rv, tmp
-
- /* Use omap_uart_phys/virt if already configured */
-9: adr \rp, 99f @ get effective addr of 99f
- ldr \rv, [\rp] @ get absolute addr of 99f
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
- sub \tmp, \rp, \rv @ make it effective
- ldr \rp, [\tmp, #0] @ omap_uart_phys
- ldr \rv, [\tmp, #4] @ omap_uart_virt
- cmp \rp, #0 @ is port configured?
- cmpne \rv, #0
- bne 100f @ already configured
-
- /* Check the debug UART configuration set in uncompress.h */
- and \rp, pc, #0xff000000
- ldr \rv, =OMAP_UART_INFO_OFS
- ldr \rp, [\rp, \rv]
-
- /* Select the UART to use based on the UART1 scratchpad value */
-10: cmp \rp, #0 @ no port configured?
- beq 11f @ if none, try to use UART1
- cmp \rp, #OMAP1UART1
- beq 11f @ configure OMAP1UART1
- cmp \rp, #OMAP1UART2
- beq 12f @ configure OMAP1UART2
- cmp \rp, #OMAP1UART3
- beq 13f @ configure OMAP2UART3
-
- /* Configure the UART offset from the phys/virt base */
-11: mov \rp, #0x00fb0000 @ OMAP1UART1
- b 98f
-12: mov \rp, #0x00fb0000 @ OMAP1UART1
- orr \rp, \rp, #0x00000800 @ OMAP1UART2
- b 98f
-13: mov \rp, #0x00fb0000 @ OMAP1UART1
- orr \rp, \rp, #0x00000800 @ OMAP1UART2
- orr \rp, \rp, #0x00009000 @ OMAP1UART3
-
- /* Store both phys and virt address for the uart */
-98: add \rp, \rp, #0xff000000 @ phys base
- str \rp, [\tmp, #0] @ omap_uart_phys
- sub \rp, \rp, #0xff000000 @ phys base
- add \rp, \rp, #0xfe000000 @ virt base
- str \rp, [\tmp, #4] @ omap_uart_virt
- b 9b
-
- .align
-99: .word .
- .word omap_uart_phys
- .ltorg
-
-100:
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
- and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- beq 1002f
- ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
- and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- bne 1001b
-1002:
- .endm
-
- .macro waituart,rd,rx
- .endm