@@ -4,6 +4,7 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
Required properties:
- compatible : Should be "bosch,c_can" for C_CAN controllers and
"bosch,d_can" for D_CAN controllers.
+ Can be "ti,dra7-d_can".
- reg : physical base address and size of the C_CAN/D_CAN
registers map
- interrupts : property with a value describing the interrupt
@@ -190,6 +190,18 @@ static const struct c_can_driver_data d_can_drvdata = {
.id = BOSCH_D_CAN,
};
+static const struct raminit_bits dra7_raminit_bits[] = {
+ [0] = { .start = 3, .done = 1, },
+ [1] = { .start = 5, .done = 2, },
+};
+
+static const struct c_can_driver_data dra7_dcan_drvdata = {
+ .id = BOSCH_D_CAN,
+ .raminit_num = ARRAY_SIZE(dra7_raminit_bits),
+ .raminit_bits = dra7_raminit_bits,
+ .raminit_pulse = true,
+};
+
static struct platform_device_id c_can_id_table[] = {
{
.name = KBUILD_MODNAME,
@@ -210,6 +222,7 @@ MODULE_DEVICE_TABLE(platform, c_can_id_table);
static const struct of_device_id c_can_of_table[] = {
{ .compatible = "bosch,c_can", .data = &c_can_drvdata },
{ .compatible = "bosch,d_can", .data = &d_can_drvdata },
+ { .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, c_can_of_table);