@@ -754,18 +754,36 @@ requeue:
dev_kfree_skb_any(new_skb);
}
-static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
+static irqreturn_t cpsw_dummy_interrupt(int irq, void *dev_id)
{
struct cpsw_priv *priv = dev_id;
int value = irq - priv->irqs_table[0];
- /* NOTICE: Ending IRQ here. The trick with the 'value' variable above
- * is to make sure we will always write the correct value to the EOI
- * register. Namely 0 for RX_THRESH Interrupt, 1 for RX Interrupt, 2
- * for TX Interrupt and 3 for MISC Interrupt.
- */
cpdma_ctlr_eoi(priv->dma, value);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cpsw_tx_interrupt(int irq, void *dev_id)
+{
+ struct cpsw_priv *priv = dev_id;
+
+ cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
+ cpdma_chan_process(priv->txch, 128);
+
+ priv = cpsw_get_slave_priv(priv, 1);
+ if (priv)
+ cpdma_chan_process(priv->txch, 128);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id)
+{
+ struct cpsw_priv *priv = dev_id;
+
+ cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
+
cpsw_intr_disable(priv);
if (priv->irq_enabled == true) {
cpsw_disable_irq(priv);
@@ -1617,7 +1635,8 @@ static void cpsw_ndo_poll_controller(struct net_device *ndev)
cpsw_intr_disable(priv);
cpdma_ctlr_int_ctrl(priv->dma, false);
- cpsw_interrupt(ndev->irq, priv);
+ cpsw_rx_interrupt(priv->irq[1], priv);
+ cpsw_tx_interrupt(priv->irq[2], priv);
cpdma_ctlr_int_ctrl(priv->dma, true);
cpsw_intr_enable(priv);
}
@@ -2351,7 +2370,7 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_ale_ret;
priv->irqs_table[0] = irq;
- ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+ ret = devm_request_irq(&pdev->dev, irq, cpsw_dummy_interrupt,
0, dev_name(&pdev->dev), priv);
if (ret < 0) {
dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2363,7 +2382,7 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_ale_ret;
priv->irqs_table[1] = irq;
- ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+ ret = devm_request_irq(&pdev->dev, irq, cpsw_rx_interrupt,
0, dev_name(&pdev->dev), priv);
if (ret < 0) {
dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2375,7 +2394,7 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_ale_ret;
priv->irqs_table[2] = irq;
- ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+ ret = devm_request_irq(&pdev->dev, irq, cpsw_tx_interrupt,
0, dev_name(&pdev->dev), priv);
if (ret < 0) {
dev_err(priv->dev, "error attaching irq (%d)\n", ret);
@@ -2387,7 +2406,7 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_ale_ret;
priv->irqs_table[3] = irq;
- ret = devm_request_irq(&pdev->dev, irq, cpsw_interrupt,
+ ret = devm_request_irq(&pdev->dev, irq, cpsw_dummy_interrupt,
0, dev_name(&pdev->dev), priv);
if (ret < 0) {
dev_err(priv->dev, "error attaching irq (%d)\n", ret);
Now we can introduce dedicated IRQ handlers for each of the IRQ events. This helps with cleaning up a little bit of the clutter in cpsw_interrupt() while also making sure that TX IRQs will try to handle TX buffers while RX IRQs will try to handle RX buffers. Signed-off-by: Felipe Balbi <balbi@ti.com> --- drivers/net/ethernet/ti/cpsw.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)