diff mbox

[v2,3/8] gpio: omap: convert debounce functions switch to use gpio offset

Message ID 1427113110-20813-4-git-send-email-grygorii.strashko@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Grygorii.Strashko@linaro.org March 23, 2015, 12:18 p.m. UTC 
From: Grygorii Strashko <grygorii.strashko@linaro.org>

Convert debounce functions to use GPIO offset instead of system
GPIO numbers. This allows to drop unneeded conversations between
system GPIO <-> GPIO offset which are done in many places and
many times.
It is safe to do now because:
- gpiolib always passes GPIO offset to GPIO controller
- OMAP GPIO driver converted to use IRQ domain

This is preparation step before removing:
 #define GPIO_INDEX(bank, gpio)
 #define GPIO_BIT(bank, gpio)
 int omap_irq_to_gpio()

Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
---
 drivers/gpio/gpio-omap.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Linus Walleij March 27, 2015, 10:05 a.m. UTC | #1 
On Mon, Mar 23, 2015 at 1:18 PM,  <grygorii.strashko@linaro.org> wrote:

> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> Convert debounce functions to use GPIO offset instead of system
> GPIO numbers. This allows to drop unneeded conversations between
> system GPIO <-> GPIO offset which are done in many places and
> many times.
> It is safe to do now because:
> - gpiolib always passes GPIO offset to GPIO controller
> - OMAP GPIO driver converted to use IRQ domain
>
> This is preparation step before removing:
>  #define GPIO_INDEX(bank, gpio)
>  #define GPIO_BIT(bank, gpio)
>  int omap_irq_to_gpio()
>
> Tested-by: Tony Lindgren <tony@atomide.com>
> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
> Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 7aeee7b..2df693b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -208,13 +208,13 @@  static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
 /**
  * omap2_set_gpio_debounce - low level gpio debounce time
  * @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
+ * @offset: the gpio number on this @bank
  * @debounce: debounce time to use
  *
  * OMAP's debounce time is in 31us steps so we need
  * to convert and round up to the closest unit.
  */
-static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
 				    unsigned debounce)
 {
 	void __iomem		*reg;
@@ -231,7 +231,7 @@  static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	else
 		debounce = (debounce / 0x1f) - 1;
 
-	l = GPIO_BIT(bank, gpio);
+	l = BIT(offset);
 
 	clk_prepare_enable(bank->dbck);
 	reg = bank->base + bank->regs->debounce;
@@ -266,16 +266,16 @@  static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 /**
  * omap_clear_gpio_debounce - clear debounce settings for a gpio
  * @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
+ * @offset: the gpio number on this @bank
  *
  * If a gpio is using debounce, then clear the debounce enable bit and if
  * this is the only gpio in this bank using debounce, then clear the debounce
  * time too. The debounce clock will also be disabled when calling this function
  * if this is the only gpio in the bank using debounce.
  */
-static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
+static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
 {
-	u32 gpio_bit = GPIO_BIT(bank, gpio);
+	u32 gpio_bit = BIT(offset);
 
 	if (!bank->dbck_flag)
 		return;
@@ -659,7 +659,7 @@  static void omap_reset_gpio(struct gpio_bank *bank, int gpio)
 	omap_set_gpio_irqenable(bank, gpio, 0);
 	omap_clear_gpio_irqstatus(bank, gpio);
 	omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
-	omap_clear_gpio_debounce(bank, gpio);
+	omap_clear_gpio_debounce(bank, GPIO_INDEX(bank, gpio));
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */