diff mbox

[3/3] ARM: dts: am335x-base0033: Use IOPAD pinmux macro

Message ID 1445268861-11857-4-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Oct. 19, 2015, 3:34 p.m. UTC 
Use the AM33XX pinmux IOPAD macro to define the physical address instead
of the offset from the padconf address. It makes the DTS easier to read
since matches the addresses listed in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 arch/arm/boot/dts/am335x-base0033.dts | 48 +++++++++++++++++------------------
 1 file changed, 24 insertions(+), 24 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 72a9b3fc4251..58a05f7d0b7c 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -46,39 +46,39 @@ 
 &am33xx_pinmux {
 	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
 		>;
 	};
 	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 		>;
 	};
 
 	leds_base_pins: pinmux_leds_base_pins {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
 		>;
 	};
 };