diff mbox

[36/39] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro

Message ID 1447390457-1158-37-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Nov. 13, 2015, 4:54 a.m. UTC 
Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/twl6030_omap4.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c42b..e373f59cea9c 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@ 
 &omap4_pmx_wkup {
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -32,7 +32,7 @@ 
 &omap4_pmx_core {
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 };