diff mbox

[06/39] ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro

Message ID 1447390457-1158-7-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Nov. 13, 2015, 4:53 a.m. UTC 
Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-chiliboard.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20a8aa7..15d47ab28865 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -37,26 +37,26 @@ 
 &am33xx_pinmux {
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
 		>;
 	};
 
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	led_gpio_pins: led_gpio_pins {
 		pinctrl-single,pins = <
-			0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
 		>;
 	};
 };