diff mbox

[V2,14/19] ARM: dts: am57xx: sbc-am57x: add EEPROM support

Message ID 1448993001-19495-15-git-send-email-lifshitz@compulab.co.il (mailing list archive)
State New, archived
Headers show

Commit Message

Dmitry Lifshitz Dec. 1, 2015, 6:03 p.m. UTC 
On-board EEPROM chip is used for storing a board production info.

Add carrier board EEPROM support (over I2C5 bus).

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
---

  v2:

   * No fuctional changes
   * Reformat subject

 arch/arm/boot/dts/am57xx-sbc-am57x.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index 17a1972..a3588ba 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -43,6 +43,13 @@ 
 			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
 };
 
 &uart3 {
@@ -70,3 +77,16 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
 };
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};