@@ -34,7 +34,6 @@
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-mxc_nand.h>
@@ -1461,25 +1460,12 @@ MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
{
struct device_node *np = host->dev->of_node;
- struct mxc_nand_platform_data *pdata = &host->pdata;
const struct of_device_id *of_id =
of_match_device(mxcnd_dt_ids, host->dev);
- int buswidth;
if (!np)
return 1;
- if (of_get_nand_ecc_mode(np) >= 0)
- pdata->hw_ecc = 1;
-
- pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
-
- buswidth = of_get_nand_bus_width(np);
- if (buswidth < 0)
- return buswidth;
-
- pdata->width = buswidth / 8;
-
host->devtype_data = of_id->data;
return 0;
@@ -1578,25 +1564,18 @@ static int mxcnd_probe(struct platform_device *pdev)
this->ecc.size = 512;
this->ecc.layout = host->devtype_data->ecclayout_512;
- if (host->pdata.hw_ecc) {
- this->ecc.calculate = mxc_nand_calculate_ecc;
- this->ecc.hwctl = mxc_nand_enable_hwecc;
- this->ecc.correct = host->devtype_data->correct_data;
+ if (host->pdata.hw_ecc)
this->ecc.mode = NAND_ECC_HW;
- } else {
+ else
this->ecc.mode = NAND_ECC_SOFT;
- }
/* NAND bus width determines access functions used by upper layer */
if (host->pdata.width == 2)
this->options |= NAND_BUSWIDTH_16;
- if (host->pdata.flash_bbt) {
- this->bbt_td = &bbt_main_descr;
- this->bbt_md = &bbt_mirror_descr;
- /* update flash based bbt */
+ /* update flash based bbt */
+ if (host->pdata.flash_bbt)
this->bbt_options |= NAND_BBT_USE_FLASH;
- }
init_completion(&host->op_completion);
@@ -1637,6 +1616,27 @@ static int mxcnd_probe(struct platform_device *pdev)
goto escan;
}
+ switch (this->ecc.mode) {
+ case NAND_ECC_HW:
+ this->ecc.calculate = mxc_nand_calculate_ecc;
+ this->ecc.hwctl = mxc_nand_enable_hwecc;
+ this->ecc.correct = host->devtype_data->correct_data;
+ break;
+
+ case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
+ break;
+
+ default:
+ err = -EINVAL;
+ goto escan;
+ }
+
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ }
+
/* allocate the right size buffer now */
devm_kfree(&pdev->dev, (void *)host->data_buf);
host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
The core now takes care of parsing generic DT properties in nand_scan_ident() when nand_set_flash_node() has been called. Rely on this initialization instead of calling of_get_nand_xxx() manually. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/mtd/nand/mxc_nand.c | 50 ++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 25 deletions(-)