| Message ID | 1459515272-31011-11-git-send-email-boris.brezillon@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 01 Apr 02:54 PM, Boris Brezillon wrote: > The core now takes care of parsing generic DT properties in > nand_scan_ident() when nand_set_flash_node() has been called. > Rely on this initialization instead of calling of_get_nand_xxx() > manually. > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Thanks, > --- > drivers/mtd/nand/pxa3xx_nand.c | 28 +++++++++++----------------- > 1 file changed, 11 insertions(+), 17 deletions(-) > > diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c > index d650885..38d26ab 100644 > --- a/drivers/mtd/nand/pxa3xx_nand.c > +++ b/drivers/mtd/nand/pxa3xx_nand.c > @@ -29,7 +29,6 @@ > #include <linux/slab.h> > #include <linux/of.h> > #include <linux/of_device.h> > -#include <linux/of_mtd.h> > #include <linux/platform_data/mtd-nand-pxa3xx.h> > > #define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200) > @@ -1651,6 +1650,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) > if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) > nand_writel(info, NDECCCTRL, 0x0); > > + if (pdata->flash_bbt) > + chip->bbt_options |= NAND_BBT_USE_FLASH; > + > + chip->ecc.strength = pdata->ecc_strength; > + chip->ecc.size = pdata->ecc_step_size; > + > if (nand_scan_ident(mtd, 1, NULL)) > return -ENODEV; > > @@ -1663,13 +1668,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) > } > } > > - if (pdata->flash_bbt) { > + if (chip->bbt_options & NAND_BBT_USE_FLASH) { > /* > * We'll use a bad block table stored in-flash and don't > * allow writing the bad block marker to the flash. > */ > - chip->bbt_options |= NAND_BBT_USE_FLASH | > - NAND_BBT_NO_OOB_BBM; > + chip->bbt_options |= NAND_BBT_NO_OOB_BBM; > chip->bbt_td = &bbt_main_descr; > chip->bbt_md = &bbt_mirror_descr; > } > @@ -1689,10 +1693,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) > } > } > > - if (pdata->ecc_strength && pdata->ecc_step_size) { > - ecc_strength = pdata->ecc_strength; > - ecc_step = pdata->ecc_step_size; > - } else { > + ecc_strength = chip->ecc.strength; > + ecc_step = chip->ecc.size; > + if (!ecc_strength || !ecc_step) { > ecc_strength = chip->ecc_strength_ds; > ecc_step = chip->ecc_step_ds; > } > @@ -1903,15 +1906,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) > if (of_get_property(np, "marvell,nand-keep-config", NULL)) > pdata->keep_config = 1; > of_property_read_u32(np, "num-cs", &pdata->num_cs); > - pdata->flash_bbt = of_get_nand_on_flash_bbt(np); > - > - pdata->ecc_strength = of_get_nand_ecc_strength(np); > - if (pdata->ecc_strength < 0) > - pdata->ecc_strength = 0; > - > - pdata->ecc_step_size = of_get_nand_ecc_step_size(np); > - if (pdata->ecc_step_size < 0) > - pdata->ecc_step_size = 0; > > pdev->dev.platform_data = pdata; > > -- > 2.5.0 >
On Wed, 13 Apr 2016 11:48:22 -0300 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> wrote: > On 01 Apr 02:54 PM, Boris Brezillon wrote: > > The core now takes care of parsing generic DT properties in > > nand_scan_ident() when nand_set_flash_node() has been called. > > Rely on this initialization instead of calling of_get_nand_xxx() > > manually. > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Applied.
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index d650885..38d26ab 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -29,7 +29,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_mtd.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> #define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200) @@ -1651,6 +1650,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) nand_writel(info, NDECCCTRL, 0x0); + if (pdata->flash_bbt) + chip->bbt_options |= NAND_BBT_USE_FLASH; + + chip->ecc.strength = pdata->ecc_strength; + chip->ecc.size = pdata->ecc_step_size; + if (nand_scan_ident(mtd, 1, NULL)) return -ENODEV; @@ -1663,13 +1668,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) } } - if (pdata->flash_bbt) { + if (chip->bbt_options & NAND_BBT_USE_FLASH) { /* * We'll use a bad block table stored in-flash and don't * allow writing the bad block marker to the flash. */ - chip->bbt_options |= NAND_BBT_USE_FLASH | - NAND_BBT_NO_OOB_BBM; + chip->bbt_options |= NAND_BBT_NO_OOB_BBM; chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; } @@ -1689,10 +1693,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) } } - if (pdata->ecc_strength && pdata->ecc_step_size) { - ecc_strength = pdata->ecc_strength; - ecc_step = pdata->ecc_step_size; - } else { + ecc_strength = chip->ecc.strength; + ecc_step = chip->ecc.size; + if (!ecc_strength || !ecc_step) { ecc_strength = chip->ecc_strength_ds; ecc_step = chip->ecc_step_ds; } @@ -1903,15 +1906,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) if (of_get_property(np, "marvell,nand-keep-config", NULL)) pdata->keep_config = 1; of_property_read_u32(np, "num-cs", &pdata->num_cs); - pdata->flash_bbt = of_get_nand_on_flash_bbt(np); - - pdata->ecc_strength = of_get_nand_ecc_strength(np); - if (pdata->ecc_strength < 0) - pdata->ecc_strength = 0; - - pdata->ecc_step_size = of_get_nand_ecc_step_size(np); - if (pdata->ecc_step_size < 0) - pdata->ecc_step_size = 0; pdev->dev.platform_data = pdata;
The core now takes care of parsing generic DT properties in nand_scan_ident() when nand_set_flash_node() has been called. Rely on this initialization instead of calling of_get_nand_xxx() manually. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/mtd/nand/pxa3xx_nand.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-)