| Message ID | 1467215067-6486-2-git-send-email-j-keerthy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 29 Jun 2016, Keerthy wrote: > The lp873x series of PMICs have a bunch of regulators and a couple > of GPO(General Purpose Outputs). > Add information for the mfd and regulator drivers. Nit: s/mfd/MFD/ > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > > Changes in v4: > > * Added the GPIO properties. > > Changes in v3: > > * Changed the example node lable to pmic from lp8733. > > Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt > > diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt > new file mode 100644 > index 0000000..1377c25 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt > @@ -0,0 +1,59 @@ > +TI LP873X MFD driver "PMIC MFD" or "MFD PMIC" > +Required properties: > + - compatible: "ti,lp8732", "ti,lp8733" > + - reg: I2C slave address. > + - gpio-controller : Marks the device node as a GPIO Controller. > + - #gpio-cells : Should be two. The first cell is the pin number and > + the second cell is used to specify flags. > + See ../gpio/gpio.txt for more information. > + - regulators: : List of child nodes that specify the regulator > + initialization data. Please standardise your formatting here. Sometimes you do ":", other times you do " :", and oddly ": :". > +Example: > + > +pmic: lp8733@60 { > + compatible = "ti,lp8733"; > + reg = <0x60>; > + gpio-controller; > + #gpio-cells = <2>; > + > + regulators { > + lp8733_buck0: buck0 { > + regulator-name = "lp8733-buck0"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-min-microamp = <1500000>; > + regulator-max-microamp = <4000000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + lp8733_buck1: buck1 { > + regulator-name = "lp8733-buck1"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-min-microamp = <1500000>; > + regulator-max-microamp = <4000000>; > + regulator-ramp-delay = <10000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + lp8733_ldo0: ldo0 { > + regulator-name = "lp8733-ldo0"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + lp8733_ldo1: ldo1 { > + regulator-name = "lp8733-ldo1"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + }; > +};
On Friday 05 August 2016 01:35 PM, Lee Jones wrote: > On Wed, 29 Jun 2016, Keerthy wrote: > >> The lp873x series of PMICs have a bunch of regulators and a couple >> of GPO(General Purpose Outputs). >> Add information for the mfd and regulator drivers. > > Nit: s/mfd/MFD/ Okay. > >> Acked-by: Rob Herring <robh@kernel.org> >> Signed-off-by: Keerthy <j-keerthy@ti.com> >> --- >> >> Changes in v4: >> >> * Added the GPIO properties. >> >> Changes in v3: >> >> * Changed the example node lable to pmic from lp8733. >> >> Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++ >> 1 file changed, 59 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt >> >> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt >> new file mode 100644 >> index 0000000..1377c25 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt >> @@ -0,0 +1,59 @@ >> +TI LP873X MFD driver > > "PMIC MFD" or "MFD PMIC" > >> +Required properties: >> + - compatible: "ti,lp8732", "ti,lp8733" >> + - reg: I2C slave address. >> + - gpio-controller : Marks the device node as a GPIO Controller. >> + - #gpio-cells : Should be two. The first cell is the pin number and >> + the second cell is used to specify flags. >> + See ../gpio/gpio.txt for more information. >> + - regulators: : List of child nodes that specify the regulator >> + initialization data. > > Please standardise your formatting here. Sometimes you do ":", other > times you do " :", and oddly ": :". Okay sure. > >> +Example: >> + >> +pmic: lp8733@60 { >> + compatible = "ti,lp8733"; >> + reg = <0x60>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + regulators { >> + lp8733_buck0: buck0 { >> + regulator-name = "lp8733-buck0"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1400000>; >> + regulator-min-microamp = <1500000>; >> + regulator-max-microamp = <4000000>; >> + regulator-ramp-delay = <10000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + lp8733_buck1: buck1 { >> + regulator-name = "lp8733-buck1"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1400000>; >> + regulator-min-microamp = <1500000>; >> + regulator-max-microamp = <4000000>; >> + regulator-ramp-delay = <10000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + lp8733_ldo0: ldo0 { >> + regulator-name = "lp8733-ldo0"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + lp8733_ldo1: ldo1 { >> + regulator-name = "lp8733-ldo1"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + }; >> +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt new file mode 100644 index 0000000..1377c25 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt @@ -0,0 +1,59 @@ +TI LP873X MFD driver + +Required properties: + - compatible: "ti,lp8732", "ti,lp8733" + - reg: I2C slave address. + - gpio-controller : Marks the device node as a GPIO Controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - regulators: : List of child nodes that specify the regulator + initialization data. +Example: + +pmic: lp8733@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + lp8733_buck0: buck0 { + regulator-name = "lp8733-buck0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_buck1: buck1 { + regulator-name = "lp8733-buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <4000000>; + regulator-ramp-delay = <10000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo0: ldo0 { + regulator-name = "lp8733-ldo0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo1: ldo1 { + regulator-name = "lp8733-ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; +};