diff mbox

[RESEND,3/3] ARM: dts: am437x-sk-evm: disable DDR regulator in rtc-only/poweroff mode

Message ID 1470893270-5042-4-git-send-email-j-keerthy@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

J, KEERTHY Aug. 11, 2016, 5:27 a.m. UTC 
From: Tero Kristo <t-kristo@ti.com>

Without this, the memory will remain active during poweroff consuming
extra power. Please note revision 2.1 PMIC seems to fail when DCDC3
disable is attempted, so this is not done on that PMIC revision. The
PMIC revision checks in the regulator patches make sure of this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm/boot/dts/am437x-sk-evm.dts | 3 +++
 1 file changed, 3 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index b5e84e6..3af92b6 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -457,6 +457,9 @@ 
 			regulator-state-mem {
 				regulator-on-in-suspend;
 			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
 
 		dcdc4: regulator-dcdc4 {