@@ -34,6 +34,7 @@ struct clk_omap_mux {
u32 *table;
u32 mask;
u8 shift;
+ s8 latch;
u8 flags;
};
@@ -86,6 +86,7 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index)
}
val |= index << mux->shift;
ti_clk_ll_ops->clk_writel(val, &mux->reg);
+ ti_clk_latch(&mux->reg, mux->latch);
return 0;
}
@@ -100,7 +101,7 @@ static struct clk *_register_mux(struct device *dev, const char *name,
const char * const *parent_names,
u8 num_parents, unsigned long flags,
struct clk_omap_reg *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table)
+ s8 latch, u8 clk_mux_flags, u32 *table)
{
struct clk_omap_mux *mux;
struct clk *clk;
@@ -121,6 +122,7 @@ static struct clk *_register_mux(struct device *dev, const char *name,
memcpy(&mux->reg, reg, sizeof(*reg));
mux->shift = shift;
mux->mask = mask;
+ mux->latch = latch;
mux->flags = clk_mux_flags;
mux->table = table;
mux->hw.init = &init;
@@ -160,7 +162,7 @@ struct clk *ti_clk_register_mux(struct ti_clk *setup)
flags |= CLK_SET_RATE_PARENT;
return _register_mux(NULL, setup->name, mux->parents, mux->num_parents,
- flags, ®, mux->bit_shift, mask,
+ flags, ®, mux->bit_shift, mask, -EINVAL,
mux_flags, NULL);
}
@@ -179,6 +181,7 @@ static void of_mux_clk_setup(struct device_node *node)
u8 clk_mux_flags = 0;
u32 mask = 0;
u32 shift = 0;
+ s32 latch = -EINVAL;
u32 flags = CLK_SET_RATE_NO_REPARENT;
num_parents = of_clk_get_parent_count(node);
@@ -197,6 +200,8 @@ static void of_mux_clk_setup(struct device_node *node)
of_property_read_u32(node, "ti,bit-shift", &shift);
+ of_property_read_u32(node, "ti,latch-bit", &latch);
+
if (of_property_read_bool(node, "ti,index-starts-at-one"))
clk_mux_flags |= CLK_MUX_INDEX_ONE;
@@ -211,7 +216,8 @@ static void of_mux_clk_setup(struct device_node *node)
mask = (1 << fls(mask)) - 1;
clk = _register_mux(NULL, node->name, parent_names, num_parents,
- flags, ®, shift, mask, clk_mux_flags, NULL);
+ flags, ®, shift, mask, latch, clk_mux_flags,
+ NULL);
if (!IS_ERR(clk))
of_clk_add_provider(node, of_clk_src_simple_get, clk);
@@ -234,6 +240,7 @@ struct clk_hw *ti_clk_build_component_mux(struct ti_clk_mux *setup)
return ERR_PTR(-ENOMEM);
mux->shift = setup->bit_shift;
+ mux->latch = -EINVAL;
mux->reg.index = setup->module;
mux->reg.offset = setup->reg;
Latching the clock settings is needed with certain clocks, where the setting is "cached" in HW before doing the actual re-programming of the clock source. This patch adds support for clock latching to the mux clock. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- drivers/clk/ti/clock.h | 1 + drivers/clk/ti/mux.c | 13 ++++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-)