@@ -329,12 +329,24 @@ static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc)
return 0;
}
+/**
+ * wkup_m3_set_rtc_only - Set the rtc_only flag
+ * @wkup_m3_wakeup: struct wkup_m3_wakeup_src * gets assigned the
+ * wakeup src value
+ */
+static void wkup_m3_set_rtc_only(struct wkup_m3_ipc *m3_ipc)
+{
+ if (m3_ipc_state)
+ m3_ipc_state->is_rtc_only = true;
+}
+
static struct wkup_m3_ipc_ops ipc_ops = {
.set_mem_type = wkup_m3_set_mem_type,
.set_resume_address = wkup_m3_set_resume_address,
.prepare_low_power = wkup_m3_prepare_low_power,
.finish_low_power = wkup_m3_finish_low_power,
.request_pm_status = wkup_m3_request_pm_status,
+ .set_rtc_only = wkup_m3_set_rtc_only,
};
/**
@@ -484,6 +496,32 @@ static int wkup_m3_ipc_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int wkup_m3_ipc_suspend(struct device *dev)
+{
+ /*
+ * Nothing needs to be done on suspend even with rtc_only flag set
+ */
+ return 0;
+}
+
+static int wkup_m3_ipc_resume(struct device *dev)
+{
+ if (m3_ipc_state->is_rtc_only) {
+ rproc_shutdown(m3_ipc_state->rproc);
+ rproc_boot(m3_ipc_state->rproc);
+ }
+
+ m3_ipc_state->is_rtc_only = false;
+
+ return 0;
+}
+
+static const struct dev_pm_ops wkup_m3_ipc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(wkup_m3_ipc_suspend, wkup_m3_ipc_resume)
+};
+#endif
+
static const struct of_device_id wkup_m3_ipc_of_match[] = {
{ .compatible = "ti,am3352-wkup-m3-ipc", },
{ .compatible = "ti,am4372-wkup-m3-ipc", },
@@ -497,6 +535,9 @@ static int wkup_m3_ipc_remove(struct platform_device *pdev)
.driver = {
.name = "wkup_m3_ipc",
.of_match_table = wkup_m3_ipc_of_match,
+#ifdef CONFIG_PM
+ .pm = &wkup_m3_ipc_pm_ops,
+#endif
},
};
@@ -40,6 +40,7 @@ struct wkup_m3_ipc {
struct mbox_chan *mbox;
struct wkup_m3_ipc_ops *ops;
+ int is_rtc_only;
};
struct wkup_m3_ipc_ops {
@@ -48,8 +49,10 @@ struct wkup_m3_ipc_ops {
int (*prepare_low_power)(struct wkup_m3_ipc *m3_ipc, int state);
int (*finish_low_power)(struct wkup_m3_ipc *m3_ipc);
int (*request_pm_status)(struct wkup_m3_ipc *m3_ipc);
+ void (*set_rtc_only)(struct wkup_m3_ipc *m3_ipc);
};
struct wkup_m3_ipc *wkup_m3_ipc_get(void);
void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc);
+void wkup_m3_set_rtc_only_mode(void);
#endif /* _LINUX_WKUP_M3_IPC_H */
Adds rtc_only support. This needs resume function to shutdown and reboot the m3. Signed-off-by: Keerthy <j-keerthy@ti.com> --- This is tested on am437x-gp-evm and target for 4.19 drivers/soc/ti/wkup_m3_ipc.c | 41 +++++++++++++++++++++++++++++++++++++++++ include/linux/wkup_m3_ipc.h | 3 +++ 2 files changed, 44 insertions(+)