diff mbox series

[3/6] ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins

Message ID 1541567060-5671-4-git-send-email-j-keerthy@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: am437x-gp-evm: Add pinctrl nodes | expand

Commit Message

J, KEERTHY Nov. 7, 2018, 5:04 a.m. UTC 
From: Dave Gerlach <d-gerlach@ti.com>

The pins used by debugss are not configued by default, place pulldowns
on the pins for maximum power savings during sleep.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[t-kristo@ti.com: converted to use AM4372_IOPAD macro]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index ae6b24e..9c5e969 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -162,7 +162,7 @@ 
 
 &am43xx_pinmux {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins>;
+	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
 	pinctrl-1 = <&wlan_pins_sleep>;
 
 	ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
@@ -580,6 +580,18 @@ 
 			AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
+
+	debugss_pins: pinmux_debugss_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
+		>;
+	};
 };
 
 &uart0 {