@@ -185,7 +185,7 @@ static struct clockdomain sgx_clkdm = {
.pwrdm = { .name = "sgx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
/*
@@ -240,7 +240,7 @@ static struct clockdomain usbhost_clkdm = {
.pwrdm = { .name = "usbhost_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
static struct clockdomain per_clkdm = {
@@ -290,7 +290,7 @@ static struct clockdomain dpll4_clkdm = {
static struct clockdomain dpll5_clkdm = {
.name = "dpll5_clkdm",
.pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
#endif /* CONFIG_ARCH_OMAP34XX */
@@ -217,8 +217,13 @@ void __init omap2_check_revision(void)
omap_chip.oc = CHIP_IS_OMAP3430;
if (omap_rev() == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() > OMAP3430_REV_ES1_0)
+ else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
+ omap_rev() <= OMAP3430_REV_ES2_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ else if (omap_rev() == OMAP3430_REV_ES3_0)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ else if (omap_rev() == OMAP3430_REV_ES3_1)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
}
@@ -221,7 +221,7 @@ static struct powerdomain core_34xx_es1_pwrdm = {
static struct powerdomain core_34xx_es2_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.dep_bit = OMAP3430_EN_CORE_SHIFT,
.flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
@@ -263,7 +263,7 @@ static struct powerdomain dss_pwrdm = {
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = gfx_sgx_wkdeps,
.sleepdep_srcs = cam_gfx_sleepdeps,
/* XXX This is accurate for 3430 SGX, but what about GFX? */
@@ -331,7 +331,7 @@ static struct powerdomain neon_pwrdm = {
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = per_usbhost_wkdeps,
.sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
@@ -373,7 +373,7 @@ static struct powerdomain dpll4_pwrdm = {
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
@@ -355,13 +355,27 @@ IS_OMAP_TYPE(3430, 0x3430)
* use omap_chip_is().
*
*/
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
+#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
+
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
+ CHIP_IS_OMAP3430ES3_0 | \
+ CHIP_IS_OMAP3430ES3_1)
+#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1)
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
int omap_chip_is(struct omap_chip_id oci);
int omap_type(void);
Some OMAP3 chip behaviors change in ES levels after ES2. Modify the existing omap_chip flags to add options for ES3.0 and ES3.1. Add a new macro, CHIP_GE_OMAP3430ES2, to cover ES levels from ES2 onwards - a common pattern for OMAP3 features. Update all current users of the omap_chip macros to use this new macro. Also add CHIP_GE_OMAP3430ES3_1 to cover the USBTLL SAR errata case (described and fixed in the following patch) Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap2/clockdomains.h | 6 +++--- arch/arm/mach-omap2/id.c | 7 ++++++- arch/arm/mach-omap2/powerdomains34xx.h | 8 ++++---- arch/arm/plat-omap/include/mach/cpu.h | 26 ++++++++++++++++++++------ 4 files changed, 33 insertions(+), 14 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html