@@ -475,8 +475,6 @@ static struct omap_hwmod_class i2c_class = {
.sysc = &i2c_sysc,
};
-static struct omap_i2c_dev_attr i2c_dev_attr;
-
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
@@ -23,7 +23,7 @@
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
- * - remove unused fields
+ * - move Linux-specific data ("non-ROM data") out
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -159,7 +159,7 @@ struct omap_hwmod_omap2_firewall {
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
-#define ADDR_MAP_ON_INIT (1 << 0)
+#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */
#define ADDR_TYPE_RT (1 << 1)
/**
@@ -200,8 +200,6 @@ struct omap_hwmod_addr_space {
* @fw: interface firewall data
* @addr_cnt: ARRAY_SIZE(@addr)
* @width: OCP data width
- * @thread_cnt: number of threads
- * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
*
@@ -221,8 +219,6 @@ struct omap_hwmod_ocp_if {
} fw;
u8 addr_cnt;
u8 width;
- u8 thread_cnt;
- u8 max_burst_len;
u8 user;
u8 flags;
};
@@ -357,9 +353,9 @@ struct omap_hwmod_omap4_prcm {
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- * SDRAM controller, etc.
+ * SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- * controller, etc.
+ * controller, etc. XXX probably belongs outside the main hwmod file
* HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
* when module is enabled, rather than the default, which is to
* enable autoidle
@@ -459,8 +455,6 @@ struct omap_hwmod_class {
* @_sysc_cache: internal-use hwmod flags
* @_mpu_rt_va: cached register target start address (internal use)
* @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
- * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
* @mpu_irqs_cnt: number of @mpu_irqs
* @sdma_reqs_cnt: number of @sdma_reqs
* @opt_clks_cnt: number of @opt_clks
@@ -506,8 +500,6 @@ struct omap_hwmod {
struct list_head node;
u16 flags;
u8 _mpu_port_index;
- u8 msuspendmux_reg_id;
- u8 msuspendmux_shift;
u8 response_lat;
u8 mpu_irqs_cnt;
u8 sdma_reqs_cnt;