@@ -141,11 +141,6 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -259,7 +254,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
@@ -225,11 +225,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -732,7 +727,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
@@ -70,11 +70,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -218,7 +213,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
@@ -389,11 +389,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -841,7 +836,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
@@ -47,11 +47,6 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -101,7 +96,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
@@ -362,10 +362,6 @@ static struct omap_dss_board_info am3517_evm_dss_data = {
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -493,7 +489,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
@@ -273,11 +273,6 @@ static struct omap_board_config_kernel apollon_config[] __initdata = {
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@ -353,7 +348,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
@@ -471,11 +471,6 @@ static void __init cm_t35_init_i2c(void)
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -637,7 +632,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
@@ -647,7 +642,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
@@ -251,11 +251,6 @@ static inline void cm_t3517_init_nand(void) {}
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -302,7 +297,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
@@ -397,12 +397,6 @@ static struct platform_device keys_gpio = {
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init devkit8000_init_irq(void)
{
omap3_init_irq();
@@ -670,7 +664,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
@@ -290,11 +290,6 @@ static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_LCD, &h4_lcd_config },
};
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init omap_h4_init_irq(void)
{
omap2_init_irq();
@@ -385,7 +380,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
+ .init_early = omap2420_init_early,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
@@ -491,11 +491,6 @@ static struct platform_device *igep_devices[] __initdata = {
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -675,7 +670,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
@@ -685,7 +680,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
@@ -193,11 +193,6 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -336,7 +331,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
@@ -622,11 +622,6 @@ static void __init n8x0_map_io(void)
omap242x_map_common_io();
}
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -698,7 +693,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -708,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -718,7 +713,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -520,11 +520,6 @@ static int __init omap3_evm_i2c_init(void)
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -684,7 +679,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
@@ -182,11 +182,6 @@ static inline void __init board_smsc911x_init(void)
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -211,7 +206,7 @@ static void __init omap3logic_init(void)
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
@@ -220,7 +215,7 @@ MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
@@ -525,11 +525,6 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -609,7 +604,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
@@ -428,11 +428,6 @@ static int __init omap3_stalker_i2c_init(void)
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init omap3_stalker_init_irq(void)
{
omap3_init_irq();
@@ -496,7 +491,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg@ema-tech.com */
.boot_params = 0x80000100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_stalker_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
@@ -326,11 +326,6 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init omap3_touchbook_init_irq(void)
{
omap3_init_irq();
@@ -407,7 +402,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
@@ -95,11 +95,6 @@ static struct platform_device *panda_devices[] __initdata = {
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -586,7 +581,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
@@ -478,11 +478,6 @@ static int __init overo_spi_init(void)
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -564,7 +559,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
@@ -123,11 +123,6 @@ static void __init rm680_peripherals_init(void)
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -158,7 +153,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
@@ -102,11 +102,6 @@ static struct omap_board_config_kernel rx51_config[] = {
{ OMAP_TAG_LCD, &rx51_lcd_config },
};
-static void __init rx51_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -161,7 +156,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.boot_params = 0x80000100,
.reserve = rx51_reserve,
.map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
@@ -27,11 +27,6 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
@@ -50,7 +45,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
.boot_params = 0x80000100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
@@ -34,11 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -138,7 +133,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
@@ -148,7 +143,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
@@ -400,6 +400,46 @@ void __init omap2_init_common_infrastructure(void)
pr_err("Could not init clock framework - unknown SoC\n");
}
+void __init omap2420_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
@@ -45,6 +45,15 @@ extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
Introduce them for each omap variant and just make them all call omap2_init_common_infrastructure for now. Do this for each board-*.c file except for board-generic and board-omap3beagle as they use the same machine ID for multiple SoCs. No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-2430sdp.c | 7 +---- arch/arm/mach-omap2/board-3430sdp.c | 7 +---- arch/arm/mach-omap2/board-3630sdp.c | 7 +---- arch/arm/mach-omap2/board-4430sdp.c | 7 +---- arch/arm/mach-omap2/board-am3517crane.c | 7 +---- arch/arm/mach-omap2/board-am3517evm.c | 6 +--- arch/arm/mach-omap2/board-apollon.c | 7 +---- arch/arm/mach-omap2/board-cm-t35.c | 9 +----- arch/arm/mach-omap2/board-cm-t3517.c | 7 +---- arch/arm/mach-omap2/board-devkit8000.c | 8 +----- arch/arm/mach-omap2/board-h4.c | 7 +---- arch/arm/mach-omap2/board-igep0020.c | 9 +----- arch/arm/mach-omap2/board-ldp.c | 7 +---- arch/arm/mach-omap2/board-n8x0.c | 11 ++------ arch/arm/mach-omap2/board-omap3evm.c | 7 +---- arch/arm/mach-omap2/board-omap3logic.c | 9 +----- arch/arm/mach-omap2/board-omap3pandora.c | 7 +---- arch/arm/mach-omap2/board-omap3stalker.c | 7 +---- arch/arm/mach-omap2/board-omap3touchbook.c | 7 +---- arch/arm/mach-omap2/board-omap4panda.c | 7 +---- arch/arm/mach-omap2/board-overo.c | 7 +---- arch/arm/mach-omap2/board-rm680.c | 7 +---- arch/arm/mach-omap2/board-rx51.c | 7 +---- arch/arm/mach-omap2/board-ti8168evm.c | 7 +---- arch/arm/mach-omap2/board-zoom.c | 9 +----- arch/arm/mach-omap2/io.c | 40 ++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/common.h | 9 ++++++ 27 files changed, 80 insertions(+), 156 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html