similarity index 100%
rename from arch/arm/plat-omap/include/plat/am33xx.h
rename to arch/arm/mach-omap2/am33xx.h
@@ -18,8 +18,8 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
@@ -21,7 +21,7 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
@@ -1,6 +1,6 @@
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-#include <plat/omap54xx.h>
+#include "omap24xx.h"
+#include "omap34xx.h"
+#include "omap44xx.h"
+#include "ti81xx.h"
+#include "am33xx.h"
+#include "omap54xx.h"
@@ -50,9 +50,8 @@
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
-
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#include "pm.h"
#include "prcm_mpu44xx.h"
similarity index 98%
rename from arch/arm/plat-omap/include/plat/omap24xx.h
rename to arch/arm/mach-omap2/omap24xx.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
* This file contains the processor specific definitions
* of the TI OMAP24XX.
*
similarity index 98%
rename from arch/arm/plat-omap/include/plat/omap34xx.h
rename to arch/arm/mach-omap2/omap34xx.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
* This file contains the processor specific definitions of the TI OMAP34XX.
*
* Copyright (C) 2007 Texas Instruments.
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap44xx.h
rename to arch/arm/mach-omap2/omap44xx.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap54xx.h
rename to arch/arm/mach-omap2/omap54xx.h
@@ -28,8 +28,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <plat/omap24xx.h>
-
+#include "omap24xx.h"
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
@@ -26,9 +26,9 @@
#include <asm/assembler.h>
-#include <plat/omap34xx.h>
#include <plat/sram.h>
+#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
@@ -14,10 +14,10 @@
#include <asm/memory.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
#include <mach/omap-secure.h>
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
similarity index 100%
rename from arch/arm/plat-omap/include/plat/ti81xx.h
rename to arch/arm/mach-omap2/ti81xx.h
@@ -3,8 +3,7 @@
#
# Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
deleted file mode 100644
@@ -1,91 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/tc.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define OMAP_RNG_BASE 0x480A0000
-#else
-#define OMAP_RNG_BASE 0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
- {
- .start = OMAP_RNG_BASE,
- .end = OMAP_RNG_BASE + 0x4f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap_rng_device = {
- .name = "omap_rng",
- .id = -1,
- .num_resources = ARRAY_SIZE(rng_resources),
- .resource = rng_resources,
-};
-
-static void omap_init_rng(void)
-{
- (void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- * (a) Does any "standard config" pin muxing needed. Board-specific
- * code will have muxed GPIO pins and done "nonstandard" setup;
- * that code could live in the boot loader.
- * (b) Populating board-specific platform_data with the data drivers
- * rely on to handle wiring variations.
- * (c) Creating platform devices as meaningful on this board and
- * with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers. So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible. In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
- /* please keep these calls, and their implementations above,
- * in alphabetical order so they're easier to sort through.
- */
- omap_init_rng();
- return 0;
-}
-arch_initcall(omap_init_devices);
These can now be moved to be local headers in mach-omap2. Note that this patch removes arch/arm/plat-omap/devices.c as it will get removed anyways with Paul Walmsley's patch "ARM: OMAP: split OMAP1, OMAP2+ RNG device registration". Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/am33xx.h | 0 arch/arm/mach-omap2/clock33xx_data.c | 2 - arch/arm/mach-omap2/control.h | 2 - arch/arm/mach-omap2/hardware.h | 12 ++-- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 3 - arch/arm/mach-omap2/omap24xx.h | 2 - arch/arm/mach-omap2/omap34xx.h | 2 - arch/arm/mach-omap2/omap44xx.h | 0 arch/arm/mach-omap2/omap54xx.h | 0 arch/arm/mach-omap2/sleep24xx.S | 3 - arch/arm/mach-omap2/sleep34xx.S | 2 - arch/arm/mach-omap2/sleep44xx.S | 2 - arch/arm/mach-omap2/ti81xx.h | 0 arch/arm/plat-omap/Makefile | 3 - arch/arm/plat-omap/devices.c | 91 ---------------------------- 15 files changed, 13 insertions(+), 111 deletions(-) rename arch/arm/{plat-omap/include/plat/am33xx.h => mach-omap2/am33xx.h} (100%) rename arch/arm/{plat-omap/include/plat/omap24xx.h => mach-omap2/omap24xx.h} (98%) rename arch/arm/{plat-omap/include/plat/omap34xx.h => mach-omap2/omap34xx.h} (98%) rename arch/arm/{plat-omap/include/plat/omap44xx.h => mach-omap2/omap44xx.h} (100%) rename arch/arm/{plat-omap/include/plat/omap54xx.h => mach-omap2/omap54xx.h} (100%) rename arch/arm/{plat-omap/include/plat/ti81xx.h => mach-omap2/ti81xx.h} (100%) delete mode 100644 arch/arm/plat-omap/devices.c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html