@@ -29,7 +29,7 @@
#include <plat/keypad.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -24,7 +24,7 @@
#include <plat/cpu.h>
#include <plat/usb.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
@@ -14,8 +14,159 @@
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+struct module;
+struct clk;
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ u8 rate_offset;
+ u8 src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
@@ -22,7 +22,7 @@
#include <asm/mach-types.h> /* for machine_is_* */
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
@@ -50,7 +50,7 @@
#include <asm/mach/irq.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/tc.h>
#include <plat/mux.h>
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/prcm.h>
#include "clock.h"
@@ -14,7 +14,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
@@ -25,7 +25,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/sdrc.h>
@@ -23,7 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "clock2xxx.h"
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "clock2xxx.h"
@@ -33,7 +33,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/sdrc.h>
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/sdrc.h>
@@ -45,7 +45,7 @@
#include <linux/io.h>
#include <linux/bug.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
@@ -21,7 +21,7 @@
#include <asm/div64.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "clock.h"
@@ -14,7 +14,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/prcm.h>
#include "clock.h"
@@ -26,7 +26,7 @@
#include <asm/cpu.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/prcm.h>
#include <trace/events/power.h>
@@ -17,8 +17,290 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
#include <linux/kernel.h>
+#include <linux/list.h>
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+ u32 val;
+ u8 div;
+ u16 flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u16 max_multiplier;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u16 max_divider;
+ u8 modes;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+ u8 flags;
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
-#include <plat/clock.h>
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "iomap.h"
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "clock.h"
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "clock34xx.h"
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "clock3517.h"
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clock.h"
#include "clock36xx.h"
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "clock.h"
@@ -27,7 +27,7 @@
#include <linux/bitops.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "clockdomain.h"
/* clkdm_list contains all registered struct clockdomains */
@@ -18,7 +18,7 @@
#include <linux/spinlock.h>
#include "powerdomain.h"
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include <plat/mux.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "iomap.h"
@@ -28,7 +28,7 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "clock.h"
@@ -15,7 +15,7 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "soc.h"
#include "clock.h"
@@ -139,7 +139,7 @@
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
@@ -27,7 +27,7 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
@@ -36,7 +36,7 @@
#include <asm/mach-types.h>
#include <asm/system_misc.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/dma.h>
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sdrc.h>
#include "sdram-nokia.h"
@@ -24,7 +24,7 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/sdrc.h>
@@ -24,7 +24,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
+#include "clock.h"
#include <plat/sram.h>
#include <plat/sdrc.h>
@@ -23,7 +23,6 @@
#include <asm/sched_clock.h>
#include <plat/common.h>
-#include <plat/clock.h>
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#define OMAP2_32KSYNCNT_REV_OFF 0x0
deleted file mode 100644
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk) (clk->name)
-#define __clk_get_parent(clk) (clk->parent)
-#define __clk_get_rate(clk) (clk->rate)
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware. Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **,
- u8 *, u8 *);
- void (*find_companion)(struct clk *, void __iomem **,
- u8 *);
- void (*allow_idle)(struct clk *);
- void (*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X (1 << 0)
-#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX (1 << 4)
-#define RATE_IN_4430 (1 << 5)
-#define RATE_IN_TI816X (1 << 6)
-#define RATE_IN_4460 (1 << 7)
-#define RATE_IN_AM33XX (1 << 8)
-#define RATE_IN_TI814X (1 << 9)
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
- void __iomem *mult_div1_reg;
- u32 mult_mask;
- u32 div1_mask;
- struct clk *clk_bypass;
- struct clk *clk_ref;
- void __iomem *control_reg;
- u32 enable_mask;
- unsigned long last_rounded_rate;
- u16 last_rounded_m;
- u16 max_multiplier;
- u8 last_rounded_n;
- u8 min_divider;
- u16 max_divider;
- u8 modes;
- void __iomem *autoidle_reg;
- void __iomem *idlest_reg;
- u32 autoidle_mask;
- u32 freqsel_mask;
- u32 idlest_mask;
- u32 dco_mask;
- u32 sddiv_mask;
- u8 auto_recal_bit;
- u8 recal_en_bit;
- u8 recal_st_bit;
- u8 flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- * bits share the same register. This flag allows the
- * omap4_dpllmx*() code to determine which GATE_CTRL bit field
- * should be used. This is a temporary solution - a better approach
- * would be to associate clock type-specific data with the clock,
- * similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 1)
-#define CLOCK_NO_IDLE_PARENT (1 << 2)
-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2 (1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named. It should be "enable_count" or
- * something similar. "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals. (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
- struct list_head node;
- const struct clkops *ops;
- const char *name;
- struct clk *parent;
- struct list_head children;
- struct list_head sibling; /* node for children */
- unsigned long rate;
- void __iomem *enable_reg;
- unsigned long (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
- u8 enable_bit;
- s8 usecount;
- u8 fixed_div;
- u8 flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- void __iomem *clksel_reg;
- u32 clksel_mask;
- const struct clksel *clksel;
- struct dpll_data *dpll_data;
- const char *clkdm_name;
- struct clockdomain *clkdm;
-#else
- u8 rate_offset;
- u8 src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
- int (*clk_enable)(struct clk *clk);
- void (*clk_disable)(struct clk *clk);
- long (*clk_round_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- void (*clk_allow_idle)(struct clk *clk);
- void (*clk_deny_idle)(struct clk *clk);
- void (*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
@@ -91,7 +91,6 @@
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley <paul@pwsan.com> --- arch/arm/mach-omap1/board-nokia770.c | 2 arch/arm/mach-omap1/clock.c | 2 arch/arm/mach-omap1/clock.h | 153 +++++++++++++ arch/arm/mach-omap1/clock_data.c | 2 arch/arm/mach-omap1/pm.c | 2 arch/arm/mach-omap2/clkt2xxx_apll.c | 2 arch/arm/mach-omap2/clkt2xxx_dpll.c | 2 arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 2 arch/arm/mach-omap2/clkt2xxx_osc.c | 2 arch/arm/mach-omap2/clkt2xxx_sys.c | 2 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 2 arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 2 arch/arm/mach-omap2/clkt_clksel.c | 2 arch/arm/mach-omap2/clkt_dpll.c | 2 arch/arm/mach-omap2/clkt_iclk.c | 2 arch/arm/mach-omap2/clock.c | 2 arch/arm/mach-omap2/clock.h | 284 ++++++++++++++++++++++++ arch/arm/mach-omap2/clock2430.c | 2 arch/arm/mach-omap2/clock2xxx.c | 2 arch/arm/mach-omap2/clock34xx.c | 2 arch/arm/mach-omap2/clock3517.c | 2 arch/arm/mach-omap2/clock36xx.c | 2 arch/arm/mach-omap2/clock3xxx.c | 2 arch/arm/mach-omap2/clockdomain.c | 2 arch/arm/mach-omap2/clockdomain.h | 2 arch/arm/mach-omap2/common.c | 2 arch/arm/mach-omap2/dpll3xxx.c | 2 arch/arm/mach-omap2/dpll44xx.c | 2 arch/arm/mach-omap2/omap_hwmod.c | 2 arch/arm/mach-omap2/pm-debug.c | 2 arch/arm/mach-omap2/pm24xx.c | 2 arch/arm/mach-omap2/sdram-nokia.c | 2 arch/arm/mach-omap2/sdrc.c | 2 arch/arm/mach-omap2/sdrc2xxx.c | 2 arch/arm/plat-omap/counter_32k.c | 1 arch/arm/plat-omap/include/plat/clock.h | 309 -------------------------- arch/arm/plat-omap/omap_device.c | 1 37 files changed, 467 insertions(+), 345 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/clock.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html