@@ -19,7 +19,6 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#ifdef CONFIG_PM_RUNTIME
@@ -4,7 +4,8 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ omap_device.o
# INTCPS IP block support - XXX should be moved to drivers/
obj-$(CONFIG_ARCH_OMAP2) += irq.o
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/davinci_emac.h>
#include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
@@ -44,7 +44,7 @@
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "mux.h"
#include "hsmmc.h"
@@ -26,7 +26,7 @@
#include "iomap.h"
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "omap4-keypad.h"
#include "soc.h"
@@ -26,7 +26,7 @@
#include <video/omapdss.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap-pm.h>
#include "common.h"
@@ -29,7 +29,7 @@
#include <linux/device.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/dma.h>
#define OMAP2_DMA_STRIDE 0x60
@@ -24,7 +24,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap_hwmod.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
@@ -24,7 +24,7 @@
#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap-pm.h>
#include "powerdomain.h"
@@ -32,7 +32,7 @@
#include <plat/cpu.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "soc.h"
#include "common.h"
@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "hdq1w.h"
#include "common.h"
@@ -19,7 +19,7 @@
#include "mmc.h"
#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "mux.h"
#include "hsmmc.h"
@@ -22,7 +22,7 @@
#include <linux/hwspinlock.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
.base_id = 0,
@@ -23,7 +23,7 @@
#include "common.h"
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap-pm.h>
#include "mux.h"
@@ -21,7 +21,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/dma.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <linux/pm_runtime.h>
/*
@@ -26,7 +26,7 @@
#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "mmc.h"
#include "common.h"
similarity index 99%
rename from arch/arm/plat-omap/omap_device.c
rename to arch/arm/mach-omap2/omap_device.c
@@ -89,7 +89,7 @@
#include <linux/of.h>
#include <linux/notifier.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap_hwmod.h>
#include <plat/clock.h>
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap_device.h
rename to arch/arm/mach-omap2/omap_device.h
@@ -19,7 +19,7 @@
#include <linux/module.h>
#include <linux/opp.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "omap_opp_data.h"
@@ -20,7 +20,7 @@
#include <asm/system_misc.h>
#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "common.h"
#include "prcm-common.h"
@@ -16,7 +16,7 @@
#include <asm/pmu.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
static char *omap2_pmu_oh_names[] = {"mpu"};
static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
@@ -31,7 +31,7 @@
#include "common.h"
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/omap-pm.h>
#include <plat/serial.h>
@@ -23,7 +23,7 @@
#include <linux/slab.h>
#include <linux/io.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "voltage.h"
#include "control.h"
@@ -44,7 +44,7 @@
#include <asm/arch_timer.h>
#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include <plat/dmtimer.h>
#include <plat/omap-pm.h>
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "mux.h"
@@ -26,7 +26,7 @@
#include <linux/usb/musb.h>
#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "am35xx.h"
@@ -9,7 +9,6 @@ obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
@@ -24,7 +24,8 @@
/* Interface documentation is in mach/omap-pm.h */
#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+
+#include "../mach-omap2/omap_device.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;
Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/pm_bus.c | 1 - arch/arm/mach-omap2/Makefile | 3 ++- arch/arm/mach-omap2/am35xx-emac.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/display.c | 2 +- arch/arm/mach-omap2/dma.c | 2 +- arch/arm/mach-omap2/drm.c | 2 +- arch/arm/mach-omap2/gpio.c | 2 +- arch/arm/mach-omap2/gpmc.c | 2 +- arch/arm/mach-omap2/hdq1w.c | 2 +- arch/arm/mach-omap2/hsmmc.c | 2 +- arch/arm/mach-omap2/hwspinlock.c | 2 +- arch/arm/mach-omap2/i2c.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 2 +- arch/arm/mach-omap2/msdi.c | 2 +- arch/arm/mach-omap2/omap_device.c | 2 +- arch/arm/mach-omap2/omap_device.h | 0 arch/arm/mach-omap2/opp.c | 2 +- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/pmu.c | 2 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/mach-omap2/sr_device.c | 2 +- arch/arm/mach-omap2/timer.c | 2 +- arch/arm/mach-omap2/usb-host.c | 2 +- arch/arm/mach-omap2/usb-musb.c | 2 +- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/omap-pm-noop.c | 3 ++- 28 files changed, 27 insertions(+), 27 deletions(-) rename arch/arm/{plat-omap/omap_device.c => mach-omap2/omap_device.c} (99%) rename arch/arm/{plat-omap/include/plat/omap_device.h => mach-omap2/omap_device.h} (100%) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html